I’ve got the F75 SE LTD also... If you didn’t know the boost mode and cache mode settings transfers over to all metal mode side and enhances its performance. It’s says so in the users manual and I asked Kelly Co. You don’t need to swing slow in boost mode using all metal mode but you do need to sweep slow using cache mode and when you’re using that setting while in all metal mode. Just set discrimination mode side first then switch over to all metal mode and it almost doubles all metal mode performance. Other settings like default or fast mode or jewelry doesn’t transfer over to enhance all metal mode. This information is on page 22 and 23 of the users manual. As you start to read each discrimination mode. You’ll noticed boost process cache locating process at the bottom of the paragraph says... when the boost mode is selected the response characteristics of the all metal mode are also modified (meaning boosted or enhanced) these characters include less noise and slow response speed. Because now its searching ultra deep and so it responds a little slow. You don’t need to sweep slow in boost mode but you do when you use cache mode. Regardless if you are using them on discrimination side and/or on all metal mode. If you select one of these options and go back to all metal mode they are enhanced if you use any other setting like default or bottlecap or jewelry then it goes back to lower performance or default. Also if you haven’t upgraded to larger 15” inch fisher coil you should. I purchased the larger 15” inch fisher coil for my F75 LTD SE and I can hit quarters over 20” inches deep! Man hole cover or 55 gallon drum jumps from 2 meters on or 6 feet on stock 11” inch coil... However the larger 15” inch fisher coil will hit same amount of metal over three meters or 10 feet deep! So if you haven’t then you should upgrade the coil.
Great find on the ring and the St Christopher pendant. I really like how all the settings are controlled with one button and one knob. You need a pilot's license to navigate all the buttons on some detectors. Awesome hunt.
Quarter Hoarder Thank you. The F75 is a really easy machine to operate, and has plenty of horse power! I've been having a lot of fun with it :) GL & HH !
MetalDetectorMatt68 Thank you for watching. This park has been giving up some nice stuff. My buddy sent me a pic of another ring he found right after I headed out. Wish I didn't have to work tomorrow :)
"Bronze Coins"...I recently returned to Japan and hunt mostly for Bronze Coins- Got a Fisher F-75 LTD a few months ago and picked up a AT Pro recently. Waiting for winter to do some hunting here because its too hot in the summer where I have to go. Did some test on both and the fisher 75 LTD really shined on the bronze coins. There is one coin over here that is really small, just a flake of a coin from the 1500s and worth about $10.00 a coin. The fisher picked it up at 5 inches out and the AT Pro would not pick it up till I got right next to the coil. The larger coins came close to the fisher maybe a inch or two behind. I could not believe how good the 75 did on the small coins in the standard mode at 75 sensitivity. I will keep the AT Pro for the rainy days and parks, but will work with the 75 as much as I can for the old stuff. This is just FYI for all you bronze coin hunters. Read more
Sweet goldring. Congrates :). Still waiting to find my first gold with this machine... i can smell it... its not far away ;D. Thanks for sharing. GL&HH on your next. Flo
DetectingtheBurgh Thanks:) Silver and gold get the heart pumping that's for sure, and the digger gets one heck of a workout. I was digging like a maniac after that ring. LOL . GL & HH!
That F75 looks like a humdinger or a detector. Those are beyond my price range, however. I hunt with the AT Pro. and the 5x9 coil. Nice finds on the ring and religious pendant. Wherever there have been a lot of people, you will usually find a lot of targets which include clad and jewelry.
I dont know, if creator of this video is still alive, is stil metal huntin, or is he active on his channel, after 8 9 years from this video until now. But, i have few questions. I am also a metal detectorist from Bosnia and Herzegovina, on the Balkans, in Southeastern Europe. Anyways in my country, we also have big sporting or relaxation areas where alot of people gather and come and go everytime, parks, camps etc. I have never considered to go park hunting, with modern findings mostly, like jewelery, new coins etc. Because in my country there are prehistoric, bronze iron age, roman, byzantine, medieval, ottoman turkish, Austrohungarian locations, forts, tradeways, settlements, towers, battlefields, old medieval villages etc. So i go full historic mode, and try to go to these kind of forgotten places to find my relics. But after seeing almost all american MDs are going alot of time to public areas, parks, camps, carnival areas etc. And, what am i asking is l, can someone please like give me a few guidelines, like little bit of intro, some free advice in how to successfully start my urban hunting. Cause it is appealing for me, i want to find some jewelery, modern valuable objects etc so i can make some money. Btw i have a Nokta The Legend. Which has the Park Mode, but i dont know actually how to behave in Park Public areas because of the trash, of the people seeing me, how to search, which spots are like the honey pots in a park, how to deal with pulltabs and all foils bottlecaps etc.
Looks like a very complicated unit to use. I rather have a more simple turn on and go unit that doesn't require all those settings and ground balancing. I love my easy to use Garrett Ace 350 and I find a lot with it
I'd give it a go with the stock coil first in the default mode, stable sensitivity, and try one of the 2 tone options with zero disc. If it's mostly iron and not a lot of other trash, this should work well. I'd still go back over the very dense spots with the 5 inch coil. You'll probably find more. I've even used the FA mode with the small coil and still dug 6 inch deep targets. That's worth a shot in real heavy iron. Hope this helps!
Hello Names Joe good find by the way I have one question. What you think with the 15 inch coil for the F75ltd-blk Have you try it? If so what you think about it
+DigDugNY I still use it. It's a very deep machine with a very fast recovery speed. I'd rank it up there pretty high, and the price is considerably less than the etrac or deus. You only get the one frequency, but it is very simple to use. The Boost Process can really see deep, even at low sensitivity settings. GL :)
I use a Garrett AT-Pro and I have done very well with it for 2016 with a total of 18 gold rings 3 gold necklaces all with gold pendents and 4 more gold pendents with out any chains lots n lots of silver and tons of trash but its ageing so I decided to buy a used f-75 that has not seen much ground so I do hope it works out for me My AT-pro will be hard to beat ...
Hi guys I have been doing some research on a less cost equipment that can help kick start my gold mining business back in Africa and I'm here by coincidence. My home country has a lot of un explored gold in certain locked regions. I'm just looking for the right tool to make operations effective and efficient. Please I will welcome any advice that can help me move forward Thank you
![Megan Thee Stallion - Mamushi (Remix) [feat. TWICE] [Official Audio]](http://i.ytimg.com/vi/5c0_u9PsrsQ/mqdefault.jpg)
Great finds enjoyed watching
I'm totally new and I have an F75! I appreciate any video with this machine!
Nice finds! That gold ring is huge compared to the one I didn't find the other day! Keep on swingin'
Louisiana Jones Thanks. Gold is always awesome, big or small! Hope you get some more :)
I’ve got the F75 SE LTD also... If you didn’t know the boost mode and cache mode settings transfers over to all metal mode side and enhances its performance. It’s says so in the users manual and I asked Kelly Co. You don’t need to swing slow in boost mode using all metal mode but you do need to sweep slow using cache mode and when you’re using that setting while in all metal mode. Just set discrimination mode side first then switch over to all metal mode and it almost doubles all metal mode performance. Other settings like default or fast mode or jewelry doesn’t transfer over to enhance all metal mode. This information is on page 22 and 23 of the users manual. As you start to read each discrimination mode. You’ll noticed boost process cache locating process at the bottom of the paragraph says... when the boost mode is selected the response characteristics of the all metal mode are also modified (meaning boosted or enhanced) these characters include less noise and slow response speed. Because now its searching ultra deep and so it responds a little slow. You don’t need to sweep slow in boost mode but you do when you use cache mode. Regardless if you are using them on discrimination side and/or on all metal mode. If you select one of these options and go back to all metal mode they are enhanced if you use any other setting like default or bottlecap or jewelry then it goes back to lower performance or default.
Also if you haven’t upgraded to larger 15” inch fisher coil you should. I purchased the larger 15” inch fisher coil for my F75 LTD SE and I can hit quarters over 20” inches deep! Man hole cover or 55 gallon drum jumps from 2 meters on or 6 feet on stock 11” inch coil... However the larger 15” inch fisher coil will hit same amount of metal over three meters or 10 feet deep! So if you haven’t then you should upgrade the coil.
2 hrs well spent with your F75! Congrats on the silver, the gold ring and all the coins. Enjoyed your video, Basia
Hey. I just got a f75 and your setup videos have been very helpful. Thanks again.
Great advice on NOT jacking the sensitivity! Good hunt!
Good hunt congrats on the gold and silver. GL & HH
forest stinnett Thank you! I appreciate you watching and commenting. GL & HH!
Just got one can't wait
Great find on the ring and the St Christopher pendant. I really like how all the settings are controlled with one button and one knob. You need a pilot's license to navigate all the buttons on some detectors. Awesome hunt.
Quarter Hoarder Thank you. The F75 is a really easy machine to operate, and has plenty of horse power! I've been having a lot of fun with it :) GL & HH !
Very nice hunt. Enjoyed the video. HH!!!
MetalDetectorMatt68 Thank you for watching. This park has been giving up some nice stuff. My buddy sent me a pic of another ring he found right after I headed out. Wish I didn't have to work tomorrow :)
Carolina Coin Hunter
wow great hunt
Nice finds! Cool gold ring! :)
Michigan Silver Hunter Thanks man. I appreciate you watching. Good luck with you metal detecting!
"Bronze Coins"...I recently returned to Japan and hunt mostly for Bronze Coins-
Got a Fisher F-75 LTD a few months ago and picked up a AT Pro recently. Waiting for winter to do some hunting here because its too hot in the summer where I have to go.
Did some test on both and the fisher 75 LTD really shined on the bronze coins. There is one coin over here that is really small, just a flake of a coin from the 1500s and worth about $10.00 a coin. The fisher picked it up at 5 inches out and the AT Pro would not pick it up till I got right next to the coil.
The larger coins came close to the fisher maybe a inch or two behind.
I could not believe how good the 75 did on the small coins in the standard mode at 75 sensitivity. I will keep the AT Pro for the rainy days and parks, but will work with the 75 as much as I can for the old stuff.
This is just FYI for all you bronze coin hunters.
Read more
Really informative video. I just got an F-75 last week
I have a F75 and I use the all metal mode. My swing is at moderate speed. I get close to 23 coins an hour. The depth on the F75 is 7 to 8 inches.
Sweet goldring. Congrates :). Still waiting to find my first gold with this machine... i can smell it... its not far away ;D. Thanks for sharing.
GL&HH on your next.
Flo
SondeldieWaldfee With that machine, I'm sure it's near. Good luck!
Good work with that Fisher, well done getting some nice finds in that Park. Silver and Gold are most welcome I would expect?
DetectingtheBurgh Thanks:) Silver and gold get the heart pumping that's for sure, and the digger gets one heck of a workout. I was digging like a maniac after that ring. LOL . GL & HH!
That F75 looks like a humdinger or a detector. Those are beyond my price range, however. I hunt with the AT Pro. and the 5x9 coil. Nice finds on the ring and religious pendant. Wherever there have been a lot of people, you will usually find a lot of targets which include clad and jewelry.
horseman528 Thanks for watching!n I have an AT Pro as well, nice machine. Good luck with you detecting :)
fisher is the best great video !!! i hunt with the fisher f75ltd !!!!!!
I dont know, if creator of this video is still alive, is stil metal huntin, or is he active on his channel, after 8 9 years from this video until now.
But, i have few questions. I am also a metal detectorist from Bosnia and Herzegovina, on the Balkans, in Southeastern Europe. Anyways in my country, we also have big sporting or relaxation areas where alot of people gather and come and go everytime, parks, camps etc.
I have never considered to go park hunting, with modern findings mostly, like jewelery, new coins etc. Because in my country there are prehistoric, bronze iron age, roman, byzantine, medieval, ottoman turkish, Austrohungarian locations, forts, tradeways, settlements, towers, battlefields, old medieval villages etc. So i go full historic mode, and try to go to these kind of forgotten places to find my relics. But after seeing almost all american MDs are going alot of time to public areas, parks, camps, carnival areas etc. And, what am i asking is l, can someone please like give me a few guidelines, like little bit of intro, some free advice in how to successfully start my urban hunting. Cause it is appealing for me, i want to find some jewelery, modern valuable objects etc so i can make some money. Btw i have a Nokta The Legend. Which has the Park Mode, but i dont know actually how to behave in Park Public areas because of the trash, of the people seeing me, how to search, which spots are like the honey pots in a park, how to deal with pulltabs and all foils bottlecaps etc.
my dad just bought one of these yesterday and its his first fisher hes trying to learn it so ill be sure to tell him to watch these videos
+WNC Relic Hunter Cool. The F75 is a powerful machine. He should do very well with it!
Looks like a very complicated unit to use. I rather have a more simple turn on and go unit that doesn't require all those settings and ground balancing. I love my easy to use Garrett Ace 350 and I find a lot with it
In future videos would you please tell us what number your finds came up under, particularly jewellery. Thanks in advance.
Thanks!
What settings do you use on the beach?😊
I hunt a 1850’s Park what’s good deep setting in trashy iron spots? Should I use the 5” or the factory coil? Thank you for the advice
I'd give it a go with the stock coil first in the default mode, stable sensitivity, and try one of the 2 tone options with zero disc. If it's mostly iron and not a lot of other trash, this should work well. I'd still go back over the very dense spots with the 5 inch coil. You'll probably find more. I've even used the FA mode with the small coil and still dug 6 inch deep targets. That's worth a shot in real heavy iron. Hope this helps!
Wots the difference between the f75 and the plus
Hello Names Joe good find by the way
I have one question.
What you think with the 15 inch coil for the F75ltd-blk
Have you try it?
If so what you think about it
Thx you it helped
Just curious if you still use this detector and if so do you think it runs up there with the etrac and deus?
+DigDugNY I still use it. It's a very deep machine with a very fast recovery speed. I'd rank it up there pretty high, and the price is considerably less than the etrac or deus. You only get the one frequency, but it is very simple to use. The Boost Process can really see deep, even at low sensitivity settings. GL :)
I use a Garrett AT-Pro and I have done very well with it for 2016 with a total of 18 gold rings 3 gold necklaces all with gold pendents and 4 more gold pendents with out any chains lots n lots of silver and tons of trash but its ageing so I decided to buy a used f-75 that has not seen much ground so I do hope it works out for me My AT-pro will be hard to beat ...
Wow, that's a lot of gold! The AT is a great machine, so is the F75. I think you'll enjoy it. Good luck :)
ringhunter 100 run that f75 in 1 tone. 0 disc. you will be amazed what the 75 sniffs out!
okzdoky
I dont believe anyone when they say they found 18 gold rings or more.
@@edl246 if he hunts on beaches its a normal thing. My friend finds that much in a couple of weeks.
I WANT THIS
Hi guys
I have been doing some research on a less cost equipment that can help kick start my gold mining business back in Africa and I'm here by coincidence. My home country has a lot of un explored gold in certain locked regions. I'm just looking for the right tool to make operations effective and efficient. Please I will welcome any advice that can help me move forward
Thank you