I thing gonna take a bit to break in, have yoy tried turning a click on the end of the base clamps? If I remember my first few rackets really stiff, as it is a brand new machine, now I think, but never really thought about it, much eaiser.
@@TheJabroniStringer all of the click on clamp and the base is at 12 o’clock, so its possible its still new? And the releasing will much easier by the time?
Hi Alan, I was wondering if I could get some guidance please? Have you ever had any troubles with the grommet hole on a5? I find that when I’m stringing a4>a5 the string is sitting very close to the frame and squashes the grommet. I’ve been stringing a couple of rackets and have been having an issue with the racket hole on a5 I’ve been stringing with exbolt65 on the Astrox88d @28lbs (27x29) and The string keeps cutting into the frame and making a groove in the graphite. I’m not sure if this was negligence on my part and perhaps I should be changing the grommet or rotating it after every single restring? Could you advise me on what I should be looking out for and when a grommet would need to be changed? Saying the groove is too low is quite vague. I have used a tension calibrator so I know my machine is pulling at the correct tension Kind regards, Kevin
@@keita1234567889 there are L shaped or T shaped grommets you might be able to find to help prevent the string digging into the frame, but yea if you notice the string digging into the grommet or the frame, might want to change the grommet, or yea recycle the grommet by turning it with a grommet grinder/remover.
@@yhj536 I am not sure if it is possible too. Sorry I am limited to what I have to use. I only have my Samsung Note 9 on a phone mount, no video skills, no editing tools, just shoot and hope for the best. Sometimes my videos are in Landscape? Because I forget to check if I made my phone level to shoot in tv mode? Sorry for my poor video shooting skills.
@@vanshthavnani6073 I think Yonex USA has 1 machine in stock cost is 10.6k usd dunno what they might charge you. Maybe 12k. BG65 set might cost ¥1200 and labor with the set would be ¥1200 so in Japan they might charge ¥2400 in the shop I work at.
Hello Alan, how to make the clamp and clamp button smoother? My precision 8.0 still new so its very hard and i don’t get used to.
I thing gonna take a bit to break in, have yoy tried turning a click on the end of the base clamps? If I remember my first few rackets really stiff, as it is a brand new machine, now I think, but never really thought about it, much eaiser.
@@TheJabroniStringer all of the click on clamp and the base is at 12 o’clock, so its possible its still new? And the releasing will much easier by the time?
Hi Alan,
I was wondering if I could get some guidance please?
Have you ever had any troubles with the grommet hole on a5?
I find that when I’m stringing a4>a5 the string is sitting very close to the frame and squashes the grommet.
I’ve been stringing a couple of rackets and have been having an issue with the racket hole on a5
I’ve been stringing with exbolt65 on the Astrox88d @28lbs (27x29) and
The string keeps cutting into the frame and making a groove in the graphite.
I’m not sure if this was negligence on my part and perhaps I should be changing the grommet or rotating it after every single restring?
Could you advise me on what I should be looking out for and when a grommet would need to be changed?
Saying the groove is too low is quite vague.
I have used a tension calibrator so I know my machine is pulling at the correct tension
Kind regards,
Kevin
@@keita1234567889 there are L shaped or T shaped grommets you might be able to find to help prevent the string digging into the frame, but yea if you notice the string digging into the grommet or the frame, might want to change the grommet, or yea recycle the grommet by turning it with a grommet grinder/remover.
not sure if it is possible if you could make POV video? that would be more interesting for us to view!
@@yhj536 I am not sure if it is possible too. Sorry I am limited to what I have to use. I only have my Samsung Note 9 on a phone mount, no video skills, no editing tools, just shoot and hope for the best. Sometimes my videos are in Landscape? Because I forget to check if I made my phone level to shoot in tv mode? Sorry for my poor video shooting skills.
Alan what is the cost of this machine as well as how much would you charge for a BG65 @28 lbs
@@vanshthavnani6073 I think Yonex USA has 1 machine in stock cost is 10.6k usd dunno what they might charge you. Maybe 12k. BG65 set might cost ¥1200 and labor with the set would be ¥1200 so in Japan they might charge ¥2400 in the shop I work at.