Thank you for watching our tutorial video. Please let us know if there is anything else you would like to see for the Lancer! Where to buy: bit.ly/LancerFender Source: www.revemoto.com
Hi thanks for the tutorial.I have an outlander which has been repaired at some point. The front wing is not aligned properly and it bows out from the car down the shut line with the door. I would imagine it's very similar in fitting to the one in your video. Would I be able to loosen it and move its position slightly to get a better fit? or are they non-adjustable. Kind regards Paul 😊
Hello Paul! Thank you for watching and yes, it would be very similar. If there was an accident, make sure to check frame and fire wall to if anything is bent. Once you take off the fender and the frame is bent, it will not fit correctly until you realign the frame. Assuming it's just the fender, you can just adjust the screws and placement.
This is an off-topic question, but for the fender, the side marker lights the ones I have on my Evo are wired, not a plug. Any suggestions on whys that?
Hello! I recall these bumpers being tough to find for all the Lancers. Please follow the link below and our staff can check your request right away. www.revemoto.com/pages/painted-parts-request
Hello. Your video is very interesting. I have a problem that maybe you can help me with. My lancer suffered a small frontal impact, the bumper was repaired and reinstalled, but there has always been a small angled gap in the line that separates the fender and the bumper, as if it were slightly hung but it has been difficult for the tinsmiths to put it back to line up. Do you have any suggestion?
Hello. I would try and realign the fender. Loosen the bolts and try to push it in or forward so the gap is better. You should also check the bumper bracket/retainer to see if that is broken. Thank you for watching!
If its possible, I think OEM evo front and rear bumper would fit perfectly without any fitment issues. But did you find any answers in the Lancer forums? I am also trying to make my lancer into a fake evo XD hahaha
@@mr.porkiepants9306 front fender on lancer/ evo forrum can possibly be done. and it is confirmed. rear fender is no chance but can manage to buy aftermarket fenders to match it with evo x fender. I saw some youtuber from austin texas "Jmedia" you could check hes lancer gt build.
Hello, and yes! The only difference that I see is the fog lights but the other parts are the same. The style of the bumper looks different but it still has the same shape. Than you for watching!
Hello! We'd love to but we haven't go one in for repairs. I don't think it's the same but all fenders for most cars are normally engineered the same way. The bolts and clips will be in the same place, more or less and they might be different sizes. Good luck and thanks for watching!
Great question. I would double check on the Lancer forums for more expert help. The fender look to be the same shape as well as the headlights and hood. I think the only difference is the fender has the vents. It's possible but we're not 100% sure. Thanks for watching!
Thank you for watching our tutorial video. Please let us know if there is anything else you would like to see for the Lancer!
Where to buy: bit.ly/LancerFender
Source: www.revemoto.com
Cheers for the video. Definitely helped me replace a damaged fender on my car
Awesome thank you for watching!
No necesito cambiar nada, pero remover cierta partes es necesario para lo que estoy haciendo, me has ayudado mucho, muchas gracias!
Nos alegra poder ayudarlo. Gracias por ver nuestro video. 😀
I noticed at 7:56 you pulled out a wire Does a Mitsubishi Lancer 2017 black edition have that side marker connector in it for the side marker ?
Hello! This Lancer did have a connector you need to unplug. I am unsure about the Black Edition but most likely does. Thank you for watching.
Hi thanks for the tutorial.I have an outlander which has been repaired at some point. The front wing is not aligned properly and it bows out from the car down the shut line with the door. I would imagine it's very similar in fitting to the one in your video. Would I be able to loosen it and move its position slightly to get a better fit? or are they non-adjustable. Kind regards Paul 😊
Hello Paul! Thank you for watching and yes, it would be very similar. If there was an accident, make sure to check frame and fire wall to if anything is bent. Once you take off the fender and the frame is bent, it will not fit correctly until you realign the frame. Assuming it's just the fender, you can just adjust the screws and placement.
This is an off-topic question, but for the fender, the side marker lights the ones I have on my Evo are wired, not a plug. Any suggestions on whys that?
Can you get a ralliart front bumper!? I’ve looked everywhere with no luck!
Hello! I recall these bumpers being tough to find for all the Lancers. Please follow the link below and our staff can check your request right away. www.revemoto.com/pages/painted-parts-request
Hello. Your video is very interesting. I have a problem that maybe you can help me with. My lancer suffered a small frontal impact, the bumper was repaired and reinstalled, but there has always been a small angled gap in the line that separates the fender and the bumper, as if it were slightly hung but it has been difficult for the tinsmiths to put it back to line up. Do you have any suggestion?
Hello. I would try and realign the fender. Loosen the bolts and try to push it in or forward so the gap is better. You should also check the bumper bracket/retainer to see if that is broken. Thank you for watching!
on the 10:32 whats the name of the plastic piece that u remove from the fender ?
I believe it’s called a Fender Gusset. If you go to the dealership show them this they will be able to help
@@ReveMoto thanks alot!
is ther any possible to put the evo x front fender on the ordinary lancers?
They look to be the same shape. It's definitely possible but we also recommend checking in the Lancer forums. Thank you for watching!
If its possible, I think OEM evo front and rear bumper would fit perfectly without any fitment issues. But did you find any answers in the Lancer forums? I am also trying to make my lancer into a fake evo XD hahaha
@@mr.porkiepants9306 front fender on lancer/ evo forrum can possibly be done. and it is confirmed. rear fender is no chance but can manage to buy aftermarket fenders to match it with evo x fender. I saw some youtuber from austin texas "Jmedia" you could check hes lancer gt build.
I have a 2015 Es, are the bumper, headlights and fender the same as a SE?
Hello, and yes! The only difference that I see is the fog lights but the other parts are the same. The style of the bumper looks different but it still has the same shape. Than you for watching!
Awesome thank you!
Could show how to replace the fender for a mitsubishi galant 2.5 v6 sedan 2003. Or is kinda the same as the Lancer?
Hello! We'd love to but we haven't go one in for repairs. I don't think it's the same but all fenders for most cars are normally engineered the same way. The bolts and clips will be in the same place, more or less and they might be different sizes. Good luck and thanks for watching!
Would a fender from the lancer evo x fit on another base model lancer?
Great question. I would double check on the Lancer forums for more expert help. The fender look to be the same shape as well as the headlights and hood. I think the only difference is the fender has the vents. It's possible but we're not 100% sure. Thanks for watching!
I have a mistubishi mirage with fender damage you think it has the same screws as that
Hello! There is a high probability that the same size bolts/screws will be used and in the same place. Good luck!
Does the front bumper need to be removed to remove the fender?
You can get away by just unbolting the sides
Someone hit our car on street so im doing this tomorrow thanks for the video
Can you remove rear fender
Nope it part structural frame trunk
That’s a lot!!