I am a French welder and your videos allow me to discover new techniques and allow me to improve, it is the best youtube channel for TIG welding 감사합니다 !
I think that you have some of the best videos on TIG welding techniques. Even when you don't subtitle in English, I still learn quite a bit from you. Thank you.
항상 유머스러운 중독성 설명과함께 한단계성장할수 있도록 영상만들어 주셔서 감사드립니다. 코로나로인해 작년에 늦은나이에 이직을결심하고 퇴사하였습니다. 전에 전기아크 co2실무경험 10년남짓 있지만 티그알곤용접 경험이 걸음마수준입니다. 다시 현장복귀할려니 약간의긴장과 설레임이 가득해있습니다. 자격증 필요로 하는 업체가 간혹있어 요번에 용접기능사와 특수용접기능사 필기 모두 합격한 상태입니다. 요번다가오는 실기시험 합격할수 있도록 응원해주시면 영광이겠습니다. 구독과좋아요는 기본으로 누르고 항상 영상언제 올라오나 눈 빠지게 기다리고 있습니다. 새해 건강하시고 행복하세요~^-^ 광주광역시에사는 74년생 인사 올립니다.
Большое спасибо за видио, мне нравится, я начинающий сварщик, очень интересно смотреть ваши ролики , снимайте больше. Покажите как сваривать прямоугольную коробку 60×1000 мм. из металла толщиной 1,5 мм. сварочный шов изнутри.
I am a proffesional welder also at food industry. Most of the times I weld this type of weld. 2mm corner joints. I set my machine to 2 hz pulse, 124A current, 20%, and 24A low current. After 8 hours I see stars while I drive home.
@@peterbagosi3862 I have the time and I get bored alot of times. So I try many many variations. From 4hz till 30 I cannot see a thing while weldin like I am at a rave party. I also like all 33. I mean 33hz, 33% and 33A low current. At 88-92 amps.
I would use at least 50 hertz pulse for this, and up to 100, on an inverter machine. As well I pulse with a foot pedal technique on certain welds to control the heat input and weld pool. It's a technique I learned back in the late 70's welding thinwall chromoly BMX frames, and flat track Harley racing frames. It can be perfected to achieve extremely uniform results, and high travel speeds.
This guy is phenomenal. Would love to meet and learn from him in person. So glad I ran across one of his videos. Subscribed and never looked back. Thanks for these Informative vids HAGOJIBI! (Wish I knew how to pronounce his name)
Pura calidad de verdad q si, lastimosamente no tengo los equipos para poner la teoría en práctica, pero cuando tenga la posibilidad estos consejos en video me serán muy útil, gracias
Good examples and useful information. Fun humor also! I think that stainless plate is "thin" when it is 1 mm or less. I am working to improve my welds and minimize heat input for 0.9 mm stainless, and it is difficult, especially at the edges of the plate. I would enjoy any new information about welding thin plate such as this 0.9 mm stainless.
좋은 영상 감사합니다~ 용접 포인트가 짧을 경우엔 스폿모드가 좋고 용접 포인트가 길 경우엔 펄스모드로 하면 더 괜찮겠네요. 제 짧은 생각입니다. ㅎㅎ 스폿 모드도 연습해봐야 하는데 요즘 회사에선 co2만 죽어라 하고 있네요;; 그래도 선배님 영상보며 항상 이미지 트레이닝 복습하고 있습니다. 항상 감사드려요~
HI, Please Make a Video About 1.5mm Stainless welding without it being deformed after welding, something like box, it will help a lot, thank you for your videos ! or please make weld in 6g positions Thank you!
That is a beautiful box (and I'm not speaking about that gril in the club) It is a easy decision to SUB your channel. Thank you. Cheers from So.Ca.USA 3rd House On the Left 🏠
How did he do that without a back purge? When I try to do stainless corner joints it gets very crusty on the backside and the face of the weld looks gray.
@@markpaddy3280 he said the backside gets grey and crusty and if you weld ss reaching full penetration without purging, it's normal that the backside will be oxydized. If you need to avoid it, you have to backpurge, or you have to not achieve full penetration: if you weld with partial penetration you won't need to purge the parts; welding like this "ok" for most of the light welding costructions as far as the parts won't work under pressure, or under high vibrations applications
'Just a tip HAGJIBI,its called a filler rod in tig welding. No disrespect meant.Just trying to help translation. 7.58 Know i know your a real welder!Hahahaha I have the same problem!LOL!!
![weld [HAGOJIBI]](http://yt3.ggpht.com/ytc/AIdro_lButtTy6bwshHHOdUuuc7ktsddm0YgRj2FhqoPUm3aQA=s48-c-k-c0x00ffffff-no-rj)
I am a French welder and your videos allow me to discover new techniques and allow me to improve, it is the best youtube channel for TIG welding
감사합니다 !
Thank you for the shared knowledge. We no need to do any other things just practice, practice, practice... Greetings from Hungary!
I think that you have some of the best videos on TIG welding techniques. Even when you don't subtitle in English, I still learn quite a bit from you. Thank you.
Я очень вам благодарен Учитель . благодаря вашим урокам ,я стал больше понимать в сварке
당신은 최고의 마스터입니다. 당신을 목격하게되어 영광입니다. 감사합니다. 텍사스에서 최고의 소원을 빌겠습니다.
Mantap cara pengelasannya. 🤝🇮🇩prom indonesia
Another master class, keep them coming .👌
항상 유머스러운 중독성 설명과함께 한단계성장할수 있도록 영상만들어 주셔서 감사드립니다.
코로나로인해 작년에 늦은나이에 이직을결심하고 퇴사하였습니다.
전에 전기아크 co2실무경험 10년남짓 있지만 티그알곤용접 경험이 걸음마수준입니다. 다시
현장복귀할려니 약간의긴장과
설레임이 가득해있습니다.
자격증 필요로 하는 업체가 간혹있어
요번에 용접기능사와 특수용접기능사 필기 모두 합격한 상태입니다.
요번다가오는 실기시험 합격할수 있도록
응원해주시면 영광이겠습니다.
구독과좋아요는 기본으로 누르고
항상 영상언제 올라오나 눈 빠지게 기다리고 있습니다.
새해 건강하시고 행복하세요~^-^
광주광역시에사는 74년생 인사 올립니다.
Excelente video, gracias por compartir tu tiempo y conocimientos.Saludos desde Argentina y cuidate.
Thank you very much for sharing your knowledge and skills. Looking forward to see more videos 🙏🏼
Большое спасибо за видио, мне нравится, я начинающий сварщик, очень интересно смотреть ваши ролики , снимайте больше. Покажите как сваривать прямоугольную коробку 60×1000 мм. из металла толщиной 1,5 мм. сварочный шов изнутри.
Un gran soldador! Increible tus videos saludos desde argentina hermano!
buen dia profesor pasela bien con su familia bendiciones GRACIAS
Отличная работа, красиво веришь 👍👍👍👍👍
Сварочный стол прошабрен..., лайк за хорошую работу 😄👍
Best Tig Sensei ! Thanks for your all videos, goin to get same skills as You someday . Keep goin with Your great videos, love them
!
Muy bueno amigo saludos desde Veracruz en México es un usted un verdadero maestro espero algo. Día soldar como usted bendiciones
Спасибо за уроки. Замечательная подача материала👍🏻👍🏻👍🏻
Excelente amigo !! Saludos de Argentina!!
Excelente como siempre, su maestría lo hace muy fácil de entender, gracias desde Argentina!!
Bonjour, toujours aussi aussi démonstratif et complet ,SUPERRR
Verry nise teaching
J'adore quand tu as bu la veille avec une jolie dame, tu es très drôle 🤣, !! Excellente vidéo comme d'habitude 👍👏
Good you is number one!
I am a proffesional welder also at food industry. Most of the times I weld this type of weld. 2mm corner joints. I set my machine to 2 hz pulse, 124A current, 20%, and 24A low current. After 8 hours I see stars while I drive home.
Good 👍
did you tried higher hz and lower amperage?
@@peterbagosi3862 I have the time and I get bored alot of times. So I try many many variations. From 4hz till 30 I cannot see a thing while weldin like I am at a rave party. I also like all 33. I mean 33hz, 33% and 33A low current. At 88-92 amps.
@@tatakizsadly, pulse light is not the healthiest thing that could happen to your eyes :/
I would use at least 50 hertz pulse for this, and up to 100, on an inverter machine. As well I pulse with a foot pedal technique on certain welds to control the heat input and weld pool. It's a technique I learned back in the late 70's welding thinwall chromoly BMX frames, and flat track Harley racing frames. It can be perfected to achieve extremely uniform results, and high travel speeds.
Nice job! Good methods!
박판 용접에 펄스 용접이 굿인것 같네요,설명도 너무 좋았습니다,항상 좋아요 구독 합니다,건승 하십시요 사부로 모시고 싶네요
Как всегда на уровне... Круто.... ❤❤❤
I am understand, thanks for information 👍👍👍🙏🙏🙏
Welder INDONESIA MALAYSIA Like
Nice video.
You explained and showed it very well! 👍🏻💪🏻
Your description of the club, I smirked. 😂
This guy is phenomenal. Would love to meet and learn from him in person. So glad I ran across one of his videos. Subscribed and never looked back. Thanks for these Informative vids HAGOJIBI! (Wish I knew how to pronounce his name)
agree
video nào của bạn mình cũng xem hết đấy, xem thích thật
Sehr gutes Video.Anschaulich erklärt.Das Video hab ich gleich gespeichert
현장마다 스타일이 다르긴한데
십몇년전 어린이보호구역 난간 만들때
1.8-2t정도 파이프를 사용했는데
보통 170-200암페어 놓고 1.6mm
용접봉으로 스트레이트로 긁었습니다.
적응하기 힘들었지만 물량뽑을러면
어쩔수 없기에 하긴 했는데
뭐 덕분에 스트레이트 긁는건
자신있더라구요. ㅎㅎ
그다음엔 압력계 버든관 0.2mm 갭큰거
2.4mm용접봉으로 용접하는것도 해보고ㅎ
하여간 용접의 세계는 참 다양한거
같습니다.
Спасибо за науку,Мужик!
Друг, пиши комментарии через переводчик. Я думаю ему это будет очень приятно. Мне тоже нравятся его ролики
펄스 용접은 진짜 써봐야 아는건데 , 설명 너무 잘해주시네요 ㅎㅎㅎ 이건 JIN짜 해봐야 암,,, ㅎㅎㅎ
Thanks you. MASTER.
Pura calidad de verdad q si, lastimosamente no tengo los equipos para poner la teoría en práctica, pero cuando tenga la posibilidad estos consejos en video me serán muy útil, gracias
Good 👍✊💘
was nice to watch your welding movie, as soon as possible I'll buy welding machine:))))
and I'll learn from you:o))))
Thanks...
Love the videos you do great work
채널을 구독하겠습니다. 매우 비싼 지식. 인도네시아에서 인사
Good job 👌
Спасибо что делитесь своим опытом. 👍
Nice Job
수고가 많으세요~~
2t 스텐레스 코너 용접을 스트레이트로 할때 텅스텐 조준은 센터인가요~~
아님 두께쪽에 하나요~~~
감기 조심 하시고 건강하세요^^
Good examples and useful information. Fun humor also! I think that stainless plate is "thin" when it is 1 mm or less. I am working to improve my welds and minimize heat input for 0.9 mm stainless, and it is difficult, especially at the edges of the plate. I would enjoy any new information about welding thin plate such as this 0.9 mm stainless.
정말 재밌어요. 잘보고 갑니다
Muito boas dicas! saudações do Brasil! DÔMO ARIGATÔ GOZAIMASU!
좋은 영상 감사합니다~ 용접 포인트가 짧을 경우엔 스폿모드가 좋고 용접 포인트가 길 경우엔 펄스모드로 하면 더 괜찮겠네요.
제 짧은 생각입니다. ㅎㅎ 스폿 모드도 연습해봐야 하는데 요즘 회사에선 co2만 죽어라 하고 있네요;; 그래도 선배님 영상보며
항상 이미지 트레이닝 복습하고 있습니다. 항상 감사드려요~
您好朋友，您的視頻非常好，我喜歡您在屏幕上重複設置的方式，謝謝。而且請不要在夜總會裡喝很多酒，否則你的手會發抖）））
Fine👍🤝
Excelente vídeo, podrías hablar de la máquina que utilizas, o si ya tienes algún vídeo ponérmelo por aquí?
HI, Please Make a Video About 1.5mm Stainless welding without it being deformed after welding, something like box, it will help a lot, thank you for your videos ! or please make weld in 6g positions Thank you!
Yes!
puedes poner un link donde comprar el pulsador de calidad 2T de palanca para la antorcha?
요즘 드립이 많이 늘으셨네요 ㅎ
Muchas gracias por compartir sus conocimientos 👏👏👏
지금 스폿이랑 펄스로 밥벌어먹고 살고 있습니다. 여기서 보니 너무 반갑네요 ㅎㅎ
진정한 마스터는 드립도 마스터 해야 하겠죠. 물론 전 용접이 뭔지 몰라요.. 코딩파라서..
드립은 무엇인가.. 바로.. 여유 아니겠습니까.. ㅎㅎㅎㅎ
все понятно и без перевода
спасибо!
Thats cool
good
Si gracias por el video pero necesito una inversora como esa😄
ขอบคุณมากๆครับ
Видимо что бы играть в клубе сначала нужно расказать в ютюбе как надо работать))) хорошего дня)))
현제 용접사로 근무 중인데 알곤을 전문 적으로 하고싶은데 비드 사진을 보고 어느 정도인지 알수 있나요?
That is a beautiful box (and I'm not speaking about that gril in the club) It is a easy decision to SUB your channel. Thank you. Cheers from So.Ca.USA 3rd House On the Left 🏠
형님 전날클럽가신나봐요 펄스용접두 사이크조명나하시내요 ㅋㅋㅋ
As a full time tank welder, i don't use pulse if i can travel the bead. Because it's not good to your eyes and the method is slow.
Mas um excelente ensinamento. Brasil.
와 정말 잘하세요 잘 배움니다
재밌네요 ㅋㅋ 좋은 정보 감사합니다
Bardzo na temat i fachowo. Pracujesz z Polakami? Czy Koreańczycy też lubią w tygodniu ?
Kochamy weekend.;)
@@weldHAGOJIBI 우리도
How did he do that without a back purge? When I try to do stainless corner joints it gets very crusty on the backside and the face of the weld looks gray.
@@markpaddy3280 he said the backside gets grey and crusty and if you weld ss reaching full penetration without purging, it's normal that the backside will be oxydized. If you need to avoid it, you have to backpurge, or you have to not achieve full penetration: if you weld with partial penetration you won't need to purge the parts; welding like this "ok" for most of the light welding costructions as far as the parts won't work under pressure, or under high vibrations applications
영상 너무 잘 보고 있습니다.
정말 너무 대단하셔서 존경스럽습니다. 항상 응원하겠습니다.
유익한 가르침 감사합니다 🙏
Super , :) 멋진 영상 감사합니다!
Muito bom ficou lindo valeu pelas dicas 👏
Mọi người cho mình hỏi. Tiếng của video là tiếng nước nào vậy ạ?
อยากไปทำงานญี่ปุ่น
A onde posso comprar um aparelho desse
너무 자세하게 설명을 해주시니 너무감사합니다
Super!
Thank uuu bos kuuu
Maestro tu no pillaste la chica porque tu pulso es estupendo😜
Thank you.
Super 💓
Can i ask what size of nozzle cup you use
Most of the welding settings are included in the video.
Круть, спасибо!!!
Niceee!!! 👌🏻👌🏻
Well done
But pleas show us the inside of the subjekt
Si es bueno el wantang también el chaulafan suelde planchas de 0.70
Auf Ehre geil Inhalt danke
용접은 노가다인가요 수십번저렇게 손가락으로 눌러줘야하나요...아니면...
'Just a tip HAGJIBI,its called a filler rod in tig welding.
No disrespect meant.Just trying to help translation.
7.58 Know i know your a real welder!Hahahaha I have the same problem!LOL!!
Haz un video en pocision 6G!
맥주 캔 용접하는 법은 어떻게 될가요??
❤️❤️❤️👍👍👍
thanks