Kubota U10 mini excavator 2000hr service Part 2
HTML-код
- Опубликовано: 29 авг 2024
- Part 2 of the 2000hr service on the Kubota U10-3 mini excavator, also instruction on lubricating the machine with grease. Testing the hydraulic breaker with the new free return to tank and how to put the tracks back on the machine.
#Miniexcavator #Kubota #excavator #minimachines
Thank you so much. Just picked up a used one and amazed at how versatile the machine is.
Yes this one is really great👍 congratulations on your new to you machine 😊
thanx for taking the tine for video,,really helps others
Excellent video! I have the k008 with a thumb. It’s an excellent excavator! I find that it’s a little temperamental to start when cold. Do find that too? It requires a few tries before it gets going, but then it runs fine. It’s a new machine.
Job well done..90%of the time people would order new rollers rather than refurbishing them...you save a lot of money and used your spare time to do that...
If you just get yourself s cordless grease gun would make your life much easier.... specially a dewalt one... cheers.
Yes it's great cost almost noting when you do it your self
Thanks for the video, it will help me on mine!
This winter I'll be fixing some hydraulic rams that have internal leak and change some bots an bushings so there will be more videos on the little Kubota.
That will be really good to know as well . My machine has 1400 hours. So it’s great to see what ahead for me
Good video!!! Thanks ...
👍🏻
Great video! You take good care of your machine. How do you like using sticks? Is it much more annoying that joystick, or do you get used to it? Greetings from Denmark.
Thanks 😊 it works great, it's the same as the joystick, but you don't get the ergonomics of a joystick with the rest for arms. But it works great you don't notice it much, but after a few hours you feel it ☺️
What model breaker do you have. I managed to run that line that returns to the tank for my breaker on my kubota k008-3. Time to test it out and hopefully it will make a difference. My breaker is a kubota kxb 310q your breaker physically looks larger than mine. I'm curious what the impact energy in ft/lbs is on your breaker.
Don't remember the model number but it's an furukawa 120kg hammer. Great little thing, used it since 2015 with no problems except my own fault with no free return
Can you share links to where you bought the hose clamps on the boom and stick?
www.ebay.com/itm/Tube-Clamp-Twin-12-7mm-1-2-Hydraulic-Fluid-Air-Pneumatic-Pk2-/162133789163?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=710-127635-2958-0
That type, comes in different sizes for what type of hose you got 👌
I have same machine with a problem. Runs fine full revs but jutters and lots black smoke from exhaust when put to low revs. Would you happen to know what the problem is and how to fix. Thanks. Great video by the way
Hi and thanks. sounds strange but injectors? It's probably not the normal things since it runs good on high rpm .
Hi great videos thank you for sharing l learnd a lot from you . I got a kubota k008-3.. start on the key first time but after turning off can't start it again and it seems to get quite hot .and caused the battery to go flat .. any idea what could it be please. Thank u in advance
What are dimensions of aux lines connection? I mean where original plugs are.
Thanks
Hi I think it's 3/8, but I'm not sure.
@@MiniMachines1
Thanks. OK I thought may be you remember elbow dimension you instaled for quick conections. May be the plugs are still in your workshop?
Thanks for videos. They are very useful for me as i got k008-3.
May be you will make video on hydro suction filter replacement and idler
bearing replacement.
Thanks once more!
@@janisrusins3289 It's some years ago I did the build. I could check with the shop I bought it from. The suction filter will almost never need changing, only if your return filter fail, ore you loose dirt in the filler cap, so I will not change that one soon I think. This winter I will change the seals in some of the hydraulic rams as they have some internal leakage.
@@MiniMachines1
OK thanks for tip with suction filter!
About dimensions of aux connection- it would be much appreciated if you could check that for me in future. No rush!
Do you remember dimensions for bearings and seals for idler? Are they same as for rollers?
Thanks.
Which bolts to change the final drive oil?
There are no oil in them😀
@@MiniMachines1 grease?
@@SkiDuneTech nothing the drivesv on the Kubota are only hydraulic no gears
@@MiniMachines1 the hydraulic motors at the back are into a planetary final drive. There must be oil there?!
@@SkiDuneTech not on mine i checked with Kubota no oil, og you loosen the bolts there comes hydraulic oil out, I've tried🙈
Before i called them😅
Bro what about price for new one..
An new kubota u10-3 cost around $16700 here in Norway
bara tuta å köra