Thanks for info about carburetor . The 30mm nibbi is not a good choice as i recently found out . Im going to order a nibbi pe26fl for the stock intake manifold .
@@jefferyrobbins1942 the wheels, wheel spacers, front bumper, rear grab bar, A- arm skid plates, the swingarm skid plate, handlebars, graphics kit and rear sprocket all fit without mods. Everything else needs modifications to some degree
@@jefferyrobbins1942 i removed the PE30. It was just too much carb for the pentora. I was all over the place with it. I replaced it with a nibbi pe26. I'm running a 32 and 118 jet in it at 500ft above sea level. Now it rips. It tries to lift the front wheels off the ground in 2nd gear. I've had it up to 62 mph when I was running with my friends KTM 450. the mods make a tremendous difference. It still feels like it has more. I haven't topped it out yet. The exhaust and carb really opened it up
@@570BikerTV I literally just returned the pe30 myself lol mine was doing the same thing no matter what jets I ran or tuning etc im waiting on the pe28 now. Thank You so much for your responses, not much info on these on the web
Pe 28 is going to fight you also. They flow so much better than stock. You really should try the pe26. Mine runs amazing now. Very little tuning was needed. The throttle response is incredible
Thanks for info about carburetor . The 30mm nibbi is not a good choice as i recently found out . Im going to order a nibbi pe26fl for the stock intake manifold .
My Nibbi Install worked great
Did you use the nibbi pe26fl ?
I used the nibbi pe26 without the flange. I did the RUclips mod. With the couplers. Cut the original manifold
I wonder do the headlights of the raptor fit the pentora ? If yes will be good to know
@@luisangellancerfakeevo1387 I don't know that, but I changed the bulbs in the pentora to blue led's in mine.
Do you have a list of what parts of the raptor do fit?
@@jefferyrobbins1942 the wheels, wheel spacers, front bumper, rear grab bar, A- arm skid plates, the swingarm skid plate, handlebars, graphics kit and rear sprocket all fit without mods. Everything else needs modifications to some degree
@@570BikerTV good deal, I was looking at the extended A-arms
@jefferyrobbins1942 I was talking about the A arm skid plates. I don't have extended A arms so I cannot confirm that they will fit.
Got a link for the graphics?
@@jefferyrobbins1942 Kalair Graphics Amazon
@@570BikerTV thank you sir
What jetting are you running in the pe30?
@@jefferyrobbins1942 i removed the PE30. It was just too much carb for the pentora. I was all over the place with it. I replaced it with a nibbi pe26. I'm running a 32 and 118 jet in it at 500ft above sea level. Now it rips. It tries to lift the front wheels off the ground in 2nd gear. I've had it up to 62 mph when I was running with my friends KTM 450. the mods make a tremendous difference. It still feels like it has more. I haven't topped it out yet. The exhaust and carb really opened it up
@@570BikerTV I literally just returned the pe30 myself lol mine was doing the same thing no matter what jets I ran or tuning etc im waiting on the pe28 now. Thank
You so much for your responses, not much info on these on the web
Pe 28 is going to fight you also. They flow so much better than stock. You really should try the pe26. Mine runs amazing now. Very little tuning was needed. The throttle response is incredible
@@570BikerTV I guess I should’ve asked before I got the 28 lol the 30 was almost there but not quite so maybe I luck up
@@570BikerTV do you think the 28 will still work if I use the 32/18 jetting on it? After all the factory is a 30mm as well. I’m
Hoping it does
Стоит покупать этот квадрик??У нас есть 250сс и 450сс.
It's a good quad for the money