Because I'm seeing this comment a lot, I'll address it here. In the past, I had very good experiences with Pitaka cases as well. With the Pixel Fold, they sent me a case which did not fit the device well. The two halves would rub together when opening. After this defect became widely known, they told me they would send me a fixed version and then proceeded to ghost me. I've not heard from them since. If they have a case for the Z Fold 6, it might be totally fine, but I must admit this soured me on them as a brand.
yea and if you buy Pitaka from their site it is only a 7 Day Return policy... who has that ? my case for my Pixel fold fits really nice and that phone feels great in the hand with that case,,, oh but I think it is a Later case, I bought that one off of Swappa and the person put the case on it so I got a bonus...
@@luigynkaren062011this dude is literally buying wholesale aramid fiber cases from AliExpress with a thinborne logo added on saying support Texas brand. Buying straight from China with a huge markup to sell here 🤡.
Always clean the phone with isopropyl alcohol before applying these cases with adhesives first. It will stick and stay so much better for when you get all the surface oil off
What does 5x thinner and stronger than steel really mean? This case is 0.04" thick, so 5x thicker steel would be 0.20" thick. Nearly quarter inch thick steel would be significantly stronger than this paper thin aramid fiber case without question, albeit much heavier. This silly "marketing point" makes me really question this company's integrity. If your case is great that's fine, but don't fluffy it up with bullshit claims LOL
Just got this case and WAS super excited to put it on. Feels great, light, LOVE how thin it is. Major problem: The Z Fold 6 Case seems to have the Magsafe placements slightly off! When I place on Magsafe chargers, nothing happens. I need to move the phone down like 1mm, then charging engages. Very frustrating. Consequently, my Oh Snap ring doesn't work either (which works on other cases)! Please advise!! Considering just requesting a return/refund! This is a bad look for one of the most expensive cases out there! 😡
bro, i saw you every where. i design the case with magsafe based on the apple's magsafe charger., If you use third-party brands with MagSafe square pads or oversized MagSafe pads, they won’t attach to the phone well. ohsnap is not an official accessory by apple, choose something else
OMG, yes! I went through so many horrible cases before I found Thinborne for my Z fold 5. Best case ever, and the magsafe works great with my Dex setup. 👍
You can't. You're gonna have to sacrifice going with a bulky case no matter what. The case I have on mine makes me feel like I'm carrying around a huge calculator. It has a hinge protector that allows you to slide your S-Pen down inside the hinge protector, and it holds up to 5 cards, and that made it super thick, lol. Grrrrrrrrr it's ugly asf.. But now I can carry my pen and cards. My job requires me to have a key card for the doors and another key card to clock in and out. So I carry them 2 plus my ID and bank card. Wish there was another solution. The case I had on my S22 Ultra was amazing. It was thin and held 3 cards, and the S-Pen actually went inside the phone. So basically, you gotta sacrifice the loss of your S-Pen for looks or slap on a jumbo calculator case to haul everything around, haha.
I was using dbrand case on my fold 5, then ringke Matte case, then an aramid carbon fiber case then I finally went caseless with a skin and a stick on kickstand from Amazon. Going caseless is so liberating and I feel like I can grab and hold onto my phone more than with a case for some weird reason
@Shane Craig Please look at the Nillkin frost case with hinge protection. It is barely thicker than the one here, but has hinge protector and an excellent front protector with glass. It's cheaper than what you have here too.
LOL, first time I’ve heard someone say a 1500D case is better than a 600D case. do you think 1080 p monitor is better than 8k mornitor? Why should you use 600D aramid fiber? It’s thinner, lighter, and has clearer, more detailed textures, plus extra grip. Don’t ever think 1500D is better than 600D. We use 600D for a reason!
@@thinborne I love your products, I was wrong i have your case for my Z Fold 5, i have not bought one for the Z Fold 6 for me, I own 2 Z fold6 per shanes link to help support him,I tried the kaisenkec one it sucked hard 1500D , I have since started my own YT channel called Fury-EV-Tech, www.youtube.com/@Fury-EV-Tech where currently doing Cybertruck accessories. and I can tell you the kaisenkec magsafe sucked on the Spigen Magsafe Charger. I would like to See Red And Blue, I going to review the Kaisenkec case this week (I bought with my own money) with accessories in my Cybertruck
40 euro on Ali Express, different colours aramid, ,the high quality fine woven aramid, used it for fold 3,4,5 and now the 6. Exacly the same ,i prefere the covered camera bump( only cuttouts for the lenses)
What's their quality and return policy like? Amazon did a free return because it was often a fake Aramid, missing the subtle Aramid textured grip, ans too thick to be real. "Fibers" rubbed off, which revealed the plastic underneath.
@@thinborne yes I do I have a z flip 5 for the wife me myself I have a oneplus open with a nillkin case but still even with Samsung care your gonna send back your phone or put in a claim when ever it dings up
Amazon is selling for $18.99. Doesn't come with the tempered glass protector. I bought one for my Z Fold 5 for about $22 from Aliexpress last year. Same quality. Temu also sells it.
What's their quality and return policy like? Amazon did a free return because it was often a fake Aramid, missing the subtle Aramid textured grip and too thick to be authentic. "Fibers" rubbed off, which revealed the plastic underneath.
@@PastorVShaw I have been using Aramid fiber cases for the past 4-5 years on all my, my wife and my son's phones(about 10 phones). They all are the same, there is no better or worse aramid phone cases. They all come from China. They do sell carbon fiber like cases for about $3-4 but they usually call it carbon fiber patterned or like cases. Of course they are not aramid fiber phone cases. Amazon, Temu and Aliexpress all have free return policies, print out the free mailing labels and drop them off. Amazon uses Whole Food Stores drop off also. All are very easy free returns. I bought tons of small cheap Chinese products, clothes, shoes from Temu and Aliexpress, they usually take about 2 weeks to arrive. Never have a problem.
@PastorVShaw That has been my experience also. $20 aramid fiber cases are very different from something like this. At least they were a couple years ago when I decided to stop buying them lol.
@@shanecraigtech I have bought about 10 aramid cases over the years. They are all made from 600D carbon fiber for about $20-25 depending on the venders. They also sell something called carbon fiber patterned or carbon fiber like cases for $$3-4 but they are TPU plastic and you can bend them, not the aramid cases, they are rigid. I have used more aramid cases than you the past 4-5 years. But feel free to pay $90 for something you can get for $20-25. You and anyone else can educate yourself by looking into Temu and Aliexpress websites for aramid fiber cases for $20-25.
@thinborne Temu and Aliexpress are always hits. How do I know that I have ordered and received 100s of items over the past 6 years. They are all good but you have to pay attention to what you are ordering and read the descriptions and look at the pictures very carefully. It is funny someone who had seen 2-3 items and made judgment and comment. I repeat, I have ordered and received 100s of items over the past 6 years, before most people even know they exist. That said, maybe some airheads who don't know what they are doing are having problems.
Something I had to find out after experimenting myself is that this case also fits the spigen ez glas screen protectors with the installation bracket. Which is a total lifesaver for me cause I'm awful when it comes to stuff getting in my screen protectors.
The spot on the top near the hinge should have had a small adhesive strip, mirroring the same on the bottom. Had my case yesterday, so far no complaints, aligns with the square scosche magic mount pro2, just barely. Using for car mount with the proclip base, not using slow and hot wireless charging. Disappointed that after you pre order and receive it, then they tell you of the limitations with mag safe, kind of poor. Also arrived a week late and they used the slowest USPS shipping available, went a week caseless due to this. Paying a premium price but getting the im a start up company communication and service. I wanted the thinnest Mag safe case I could get and it did deliver on that. This also fit great with the samsung anti glare screen protector.
@PastorVShaw "the best minimalist case from us! Howdy, Please note that the Fold 6 does not offer official MagSafe from Samsung, and the camera bump is very high, almost close to the MagSafe coil. As a 3rd party case maker, we added magsafe to our case based on the original apple magsafe design. If you get a Fold 6 case from us, you should only use a MagSafe charger with a round pad similar to Apple’s original MagSafe charger. Any square, oval, non-round shape, or oversized MagSafe charger or battery pack may not work. Do not use any accessories from Spigen, ESR, and Pitaka that are not round in shape. Sincerely Karl"
@ruebarb1 Bro, we just try to make sure people understand that we base our cases on Apple chargers. Third-party brands have all sorts of standards, which might cause problems. But, they work for all high-quality chargers for sure.
I've been looking at bumper cases (doesn't cover the phone back glass) for bottom and top piece. But like they don't exist....just to have lay on table protection
They have since updated there all there cases for folding phones to just have the back part as to prevent any future rubbing, I also don't blame pitaka for the poor fitment to the pixel fold, as a lot of case companies got sent out bad forms by Google when the pixel fold launched and they would have to retool there forms to correct it, which is the reason a lot of companies stopped making pixel fold cases but retooling cost a lot of money for something Google screwed up
Shane just used your link to buy the Thinborne case, and I noticed that they have the Pixel fold 9 pro available... case... so you get to get a look at the phone... kinda weird looking... I have used the Later case and Pitaka cases in the past ... so I'll see how this brand is. thanks for the discount link
I'm rocking a latercase on my pixel fold. No adhesive in use, my pixel has taken some hard drops and has remained unaffected from the drop. I definitely recommend the fitment is great too.
I was interested in the Latercase but NO ONE has a month + to wait on a case for a 2k phone. You need a case right away preferably on the release date that's where Latercase is losing out on customers
im waiting for my z fold 6 to be delivered and eyeing up cases, for the cost I dont think the case is good enough, id pay it if it was better, also as its my first fold im not sure wether i need to look at cases with hinge protection? Edit do these guys deliver to the UK? i do like thin cases just unsure wether hinge protection required, I probably read too much reddit
big fan that they included magsafe into all their cases. not sure why more phones aren't putting this into their devices by default since it's part of the qi2 standard now (i think?). i'm gonna be very interested in the pixel fold case review. zfold is not for me but if i pick one up for the upcoming pixel fold i'll be sure to use your link or code if you get one.
Pitaka was the brand that didn't fit the Pixel Fold correctly. It was a whole ordeal lol. They also haven't sent me anything since I talked about it. That could be a total coincidence, but it also happens to be true. If memory serves, they said they would send me a fixed version and then ghosted me. I'd be happy to work with them again.
@@thinborne fair points. But the difference is minimal and for those of us who have to actually buy the case, I’m not sure those very minimal differences equate to spending $30 more for basically the same thing
I dont plan to upgrade from PF to PF2 or ZF6., and just went to their website to scope out a case for PF, but they dont even have one for PF? What gives, Thinborne?
We did! We actually sent it to my man Shane. The problem is, last year we couldn’t get it to fit correctly, so we chickened out and gave up. This year, we teamed up with the best aramid fiber supplier. They’ve got all kinds of connections, so we’re more confident and ready to release the PF2 (which is freaking 9 Pro XL Fold Ultra Max S).
I've always used pitaka or Lews Latercase but will maybe give this one a go for my fold 6 if for no other reason to use your code and help out the channel!
I purchased the benks case its just the rear piece but its very slim i was in the same place didnt want bulk love z fold 6 build didnt want to hinder that
Lol there's way better case like these at a lower price, why are they charging $100 is beyond me. For example "later case" i have purchased the memumi brand for $55 bucks, and it looks, feels, and fits better than that $100 case, I'll give them $60 max.
😂 I can't help laughing. Please research on Google about the 600D vs. 1500D, plus the MagSafe. I grew up with Lew Later and the iPhone giveaway accident. I always loved the Latercase on my iPhone X. But the 600D is far more premium than the 1500D, like Lexus vs. Toyota. ❤😂
I love that case! I wish i had known about it before i got the Terras case but i do love the one i got. I have the pink one as well and i have a transparent black case with a pink ohsnap ring which i highly recommend. Its super thin and keeps the fold in my hand. The ring matches the phone perfectly which - to me- looks like a Caucasian flesh color. No other way to describe it- but not pink haha
@@PaulCotton sorry for the inconvenience, let me talk to my shipping team, and let them work overtime to solve the problems. ( jokes, i will ask nicely, and pay them extra)
@thinborne, I saw the google Pixel 9 Pro Fold thinborne case available for preorder on your website and ordered it. @PaulCotton, I will be waiting for your review on this.
To be honest with you, a tempered glass screen protector is more important. Our cases come with one free glass screen protector, which makes it a solid protector. However, the hinge is not covered, so that is something you need to consider.
This case is way more expensive than what its supposed to be, and the comparable to steel quotes is insane, i work at a steel mill and the quotes make me laugh about protection.
Well, you just made my day-I’ve been laughing all afternoon! This case is designed to give you that no-case feeling, not to survive a drop from a skyscraper. Pair it with a screen protector, and you’re all set. Next time, try reading the description before you whip out your wallet.
@@thinborne I'm glad I made your day, this still is overpriced for no protection, I like your dropping it off a skyscraper remark lol, it should for the cost😂, but their have always been other aramid fiber cases out there that give you that no case feeling at a better cost, I understand it's a business but be competitive because like every thing else. I did actually buy one of your cases a awhile ago for one of my devices to compare it to another aramid fiber case(that was half the cost) and I found no difference in it at all, it actually was a better designed case than my thinborne one because of qc issues on the thinborne.
I don't know why these case manufacturers keep on pricing their cases based on the value of the device that it's being used for. It shouldn't be this way whatsoever. If they could sell their S24U case for $50 so why is this $90? Does the front little piece really worth an extra $40? Seriously it's appauldiing. No case should be $100 unless it comes with a built-in battery pack like back in the days. It's just plastic and whatever other material. It should just be price accordingly to the material that was used. I understand that it's a new device so they want to charge more but to me it tells me a lot about a company and will not ever buy from them. Even the official cases from Samsung are overpriced but it's the OEM so I understand that it will always cost more cause of the exact fit and finish. I ended up getting the S-pen case from Samsung for $80. It's more expensive than what I wanted to pay for a case but I know it comes with an S-pen which to me is an added value to a case that should only be $50 alone. I wanted an S-pen and I needed a case so this was my best bet. I could've went cheaper and I sort of did with 2 other cases before this and they just didn't work right with the phone, It added too much bulk to the phone as well. I like semi-thin cases myself. I could do something like this in the video but the max I would pay for it would be $50. I believe you could find some generic brand using the same material for cheaper so there is always that too. I don't need a screen protector as I already have one on my phone.
It is based on our production, marketing, and operation costs. These cases are made of 600D aramid fiber, which is an expensive material. Plus, they are partially handmade, requiring skill and dedication. Even with that, there are still defect rates; we reject at least 20% of units during our three rounds of quality checks.
@@thinborne thank you for your reply. I still don't understand why the front cover is another $40 alone when it uses way less material than the back cover of an S24U. Since this is new I could understand a more fair price of $60-$70. I know eventually it will get to that price or even lower. At this time I won't get it for $90 and I know you're entitled to price it whatever you want as you do make them.
@@volcalstone You might think the front cover only requires a bit more material, but that’s not the case. We use two identical sheets for the back and the front. it does double the cost.
Latercase is good, but if you prefer a clearer, more detailed texture and better grip, remember that 600D aramid fiber is way better than 1500D. We use 600D, so we never think we are equal players. We will have Fold 2 cases ready in one week.
my god its expensive as holy god but at least it comes with a front...... Fkn pitakas fold 6 only comes with a fkn back and is still $70 Time to waste more fkn money
lol, yes! We use 600d aramid fiber, which has thinner, clearer textures, and it costs 30% at the material. Plus, we have magsafe built-in. I love Lew Laters, the case is good, not cheap.
My case has a hole by the camera and their customer service sucks and they act like your stupid and that their product is the best thing on the planet.
Haha, I'm laughing hard, bro. There's a microphone 🎤 on the cameras for better video quality with sound. If your case doesn't have a small hole, it's defective. 😂 BTW, even though we run a business, we are still human beings. We are respectful.
😂 Bro, you make me laugh. Samsung offers a tiny microphone on the edge of the cameras, so when you take videos, the sound quality will be great. If you've got anything without the tiny hole, that's called a defect. ❤ Easy, we respect you, but we're still human beings who love to tease a little, Texan style. 😂
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Because I'm seeing this comment a lot, I'll address it here. In the past, I had very good experiences with Pitaka cases as well. With the Pixel Fold, they sent me a case which did not fit the device well. The two halves would rub together when opening. After this defect became widely known, they told me they would send me a fixed version and then proceeded to ghost me. I've not heard from them since. If they have a case for the Z Fold 6, it might be totally fine, but I must admit this soured me on them as a brand.
bro, it is better to support a local brand from texas, haha
yea and if you buy Pitaka from their site it is only a 7 Day Return policy... who has that ? my case for my Pixel fold fits really nice and that phone feels great in the hand with that case,,, oh but I think it is a Later case, I bought that one off of Swappa and the person put the case on it so I got a bonus...
@thinborne not for 100 dollar's 🤣🤡
@@luigynkaren062011this dude is literally buying wholesale aramid fiber cases from AliExpress with a thinborne logo added on saying support Texas brand. Buying straight from China with a huge markup to sell here 🤡.
My pitaka case for my pixel fold was terrible. Now I have the z fold 6and looking for the best aramid fiber case. Great video.
Always clean the phone with isopropyl alcohol before applying these cases with adhesives first. It will stick and stay so much better for when you get all the surface oil off
you are an expert!
@@thinborne 👌🫶
Yeah, when you use alcohol before using the adhesive it will hold really well
@Aus10c Smart. It is more about hygiene habits, lol.
What does 5x thinner and stronger than steel really mean? This case is 0.04" thick, so 5x thicker steel would be 0.20" thick. Nearly quarter inch thick steel would be significantly stronger than this paper thin aramid fiber case without question, albeit much heavier. This silly "marketing point" makes me really question this company's integrity. If your case is great that's fine, but don't fluffy it up with bullshit claims LOL
that makeetking crap is from the wiki pedia hahaha a
My favorite is when they use the term "military grade" to describe phone cases 😂
@@CastroJordan you rock, brother!
@@CastroJordan yes, sir!
@@CastroJordan Kelar is just a trade mark, the real product called aramid fiber
Wish they made it in colours & Transparent
we might be able to do more color if you buy now, haha
I bought a white phone. I'd definitely buy one if this case came in white.
@@thinborne i bought the carbon phone and would love a clear case
@@Steven-e7cno whit3 aramid fiber 😂
@@jakeMTSUthat makes sense
Just got this case and WAS super excited to put it on. Feels great, light, LOVE how thin it is.
Major problem: The Z Fold 6 Case seems to have the Magsafe placements slightly off! When I place on Magsafe chargers, nothing happens. I need to move the phone down like 1mm, then charging engages. Very frustrating. Consequently, my Oh Snap ring doesn't work either (which works on other cases)! Please advise!! Considering just requesting a return/refund! This is a bad look for one of the most expensive cases out there! 😡
Let me dig into this. I never bought any magsafe chargers, so I have no way to test this.
I saw on Reddit they are sending out info on what MagSafe chargers you can use with this case
I have the same issue. (with the thinbourn)I have another case the carbon fiber also. it has same issue also.
I think they were using a thin strip of metal inside rather than magnets on the case. That metal can screw up wireless chargers and magsafe chargers
bro, i saw you every where. i design the case with magsafe based on the apple's magsafe charger., If you use third-party brands with MagSafe square pads or oversized MagSafe pads, they won’t attach to the phone well. ohsnap is not an official accessory by apple, choose something else
OMG, yes! I went through so many horrible cases before I found Thinborne for my Z fold 5. Best case ever, and the magsafe works great with my Dex setup. 👍
lol, thanks,we rock!
Totally agree on Thinborne. Had one on 5 and new one for 6 is shipped.
@@zeketoo noice, thank you for the support
I just ordered the Thinborne for my fold 6 last night. 😊
@@KRYTEN451 I guess you are a very handsome man!
Pls review a case with hinge protection next
Any advise on how to carry the s pen when using that case?
You can't.
You're gonna have to sacrifice going with a bulky case no matter what. The case I have on mine makes me feel like I'm carrying around a huge calculator. It has a hinge protector that allows you to slide your S-Pen down inside the hinge protector, and it holds up to 5 cards, and that made it super thick, lol. Grrrrrrrrr it's ugly asf.. But now I can carry my pen and cards.
My job requires me to have a key card for the doors and another key card to clock in and out. So I carry them 2 plus my ID and bank card. Wish there was another solution. The case I had on my S22 Ultra was amazing. It was thin and held 3 cards, and the S-Pen actually went inside the phone.
So basically, you gotta sacrifice the loss of your S-Pen for looks or slap on a jumbo calculator case to haul everything around, haha.
I was using dbrand case on my fold 5, then ringke Matte case, then an aramid carbon fiber case then I finally went caseless with a skin and a stick on kickstand from Amazon.
Going caseless is so liberating and I feel like I can grab and hold onto my phone more than with a case for some weird reason
@Shane Craig Please look at the Nillkin frost case with hinge protection. It is barely thicker than the one here, but has hinge protector and an excellent front protector with glass. It's cheaper than what you have here too.
Have you tried Latercase? I think they are the best aramid fiber cases tbh
I like them also. wish they put magsafe on them so i didnt have to buy the magsafe ring as a addon
LOL, first time I’ve heard someone say a 1500D case is better than a 600D case. do you think 1080 p monitor is better than 8k mornitor? Why should you use 600D aramid fiber? It’s thinner, lighter, and has clearer, more detailed textures, plus extra grip. Don’t ever think 1500D is better than 600D. We use 600D for a reason!
@@thinborne you need to offer Colors :)
@@thinborne I love your products, I was wrong i have your case for my Z Fold 5, i have not bought one for the Z Fold 6 for me, I own 2 Z fold6 per shanes link to help support him,I tried the kaisenkec one it sucked hard 1500D , I have since started my own YT channel called Fury-EV-Tech, www.youtube.com/@Fury-EV-Tech where currently doing Cybertruck accessories. and I can tell you the kaisenkec magsafe sucked on the Spigen Magsafe Charger. I would like to See Red And Blue, I going to review the Kaisenkec case this week (I bought with my own money) with accessories in my Cybertruck
@@thinborne You make your cases in china... you're no better than any chinese brand dude...
40 euro on Ali Express, different colours aramid, ,the high quality fine woven aramid, used it for fold 3,4,5 and now the 6.
Exacly the same ,i prefere the covered camera bump( only cuttouts for the lenses)
Mine costed $22 USD last year from Aliexpress for my ZFold 5. Amazon is selling for $18.99 USD arriving this coming Wednesday for my ZFold 6
What's their quality and return policy like? Amazon did a free return because it was often a fake Aramid, missing the subtle Aramid textured grip, ans too thick to be real. "Fibers" rubbed off, which revealed the plastic underneath.
For me no hinge projection is a no go even if you install one the sticker protector on the hinge I wouldn't trust it
do you have samsung care+?
@@thinborne yes I do I have a z flip 5 for the wife me myself I have a oneplus open with a nillkin case but still even with Samsung care your gonna send back your phone or put in a claim when ever it dings up
@@redrover508yes, sir
Amazon is selling for $18.99. Doesn't come with the tempered glass protector. I bought one for my Z Fold 5 for about $22 from Aliexpress last year. Same quality. Temu also sells it.
What's their quality and return policy like? Amazon did a free return because it was often a fake Aramid, missing the subtle Aramid textured grip and too thick to be authentic. "Fibers" rubbed off, which revealed the plastic underneath.
@@PastorVShaw I have been using Aramid fiber cases for the past 4-5 years on all my, my wife and my son's phones(about 10 phones). They all are the same, there is no better or worse aramid phone cases. They all come from China. They do sell carbon fiber like cases for about $3-4 but they usually call it carbon fiber patterned or like cases. Of course they are not aramid fiber phone cases. Amazon, Temu and Aliexpress all have free return policies, print out the free mailing labels and drop them off. Amazon uses Whole Food Stores drop off also. All are very easy free returns. I bought tons of small cheap Chinese products, clothes, shoes from Temu and Aliexpress, they usually take about 2 weeks to arrive. Never have a problem.
@PastorVShaw That has been my experience also. $20 aramid fiber cases are very different from something like this. At least they were a couple years ago when I decided to stop buying them lol.
@@shanecraigtech I have bought about 10 aramid cases over the years. They are all made from 600D carbon fiber for about $20-25 depending on the venders. They also sell something called carbon fiber patterned or carbon fiber like cases for $$3-4 but they are TPU plastic and you can bend them, not the aramid cases, they are rigid. I have used more aramid cases than you the past 4-5 years. But feel free to pay $90 for something you can get for $20-25. You and anyone else can educate yourself by looking into Temu and Aliexpress websites for aramid fiber cases for $20-25.
@thinborne Temu and Aliexpress are always hits. How do I know that I have ordered and received 100s of items over the past 6 years. They are all good but you have to pay attention to what you are ordering and read the descriptions and look at the pictures very carefully. It is funny someone who had seen 2-3 items and made judgment and comment. I repeat, I have ordered and received 100s of items over the past 6 years, before most people even know they exist.
That said, maybe some airheads who don't know what they are doing are having problems.
Looks nice but does not have the hinge protection.
Any case without the hinge protection is a no for me. Protection is my first priority.
Wouldn't the cover adhesive fail over time since you pull along that when opening the fold every time?
It might, but that’s why we threw in an extra set of strips for you. Gotta keep that customer experience top-notch, partner!
Something I had to find out after experimenting myself is that this case also fits the spigen ez glas screen protectors with the installation bracket. Which is a total lifesaver for me cause I'm awful when it comes to stuff getting in my screen protectors.
if you go with our case, you just need to install the case first, and then install the sp later. you are all set.
The spot on the top near the hinge should have had a small adhesive strip, mirroring the same on the bottom. Had my case yesterday, so far no complaints, aligns with the square scosche magic mount pro2, just barely. Using for car mount with the proclip base, not using slow and hot wireless charging. Disappointed that after you pre order and receive it, then they tell you of the limitations with mag safe, kind of poor. Also arrived a week late and they used the slowest USPS shipping available, went a week caseless due to this. Paying a premium price but getting the im a start up company communication and service. I wanted the thinnest Mag safe case I could get and it did deliver on that. This also fit great with the samsung anti glare screen protector.
What magsafe limitations? I'm considering buying this. I do want hinge protection. Magsafe limitations may make this even a lower chance.
@PastorVShaw "the best minimalist case from us!
Howdy,
Please note that the Fold 6 does not offer official MagSafe from Samsung, and the camera bump is very high, almost close to the MagSafe coil.
As a 3rd party case maker, we added magsafe to our case based on the original apple magsafe design.
If you get a Fold 6 case from us, you should only use a MagSafe charger with a round pad similar to Apple’s original MagSafe charger. Any square, oval, non-round shape, or oversized MagSafe charger or battery pack may not work.
Do not use any accessories from Spigen, ESR, and Pitaka that are not round in shape.
Sincerely
Karl"
@ruebarb1 Bro, we just try to make sure people understand that we base our cases on Apple chargers.
Third-party brands have all sorts of standards, which might cause problems.
But, they work for all high-quality chargers for sure.
I've been looking at bumper cases (doesn't cover the phone back glass) for bottom and top piece. But like they don't exist....just to have lay on table protection
Have you tried the latercase??
Did you have the spigen screen protector on the phone with this case? Are they compatible
Pitaka is also really nice, also has some color options
Pitaka was who made the case that didn't fit right for the Pixel Fold. That soured me on them a bit..
@@shanecraigtech ah did not knownabout that. No wonder they pulled it after a while
They have since updated there all there cases for folding phones to just have the back part as to prevent any future rubbing, I also don't blame pitaka for the poor fitment to the pixel fold, as a lot of case companies got sent out bad forms by Google when the pixel fold launched and they would have to retool there forms to correct it, which is the reason a lot of companies stopped making pixel fold cases but retooling cost a lot of money for something Google screwed up
@@shanecraigtech everyone made mistakes, lol
And it's only the back piece for the same price. I was bummed to learn that.
waited out or just clean the damn thing before installing it 😅
lol
Shane just used your link to buy the Thinborne case, and I noticed that they have the Pixel fold 9 pro available... case... so you get to get a look at the phone... kinda weird looking... I have used the Later case and Pitaka cases in the past ... so I'll see how this brand is. thanks for the discount link
Yeah, I actually talked about their render a while back. They've had it up for months now lol. Thanks though and I hope you dig the case!
I'm rocking a latercase on my pixel fold. No adhesive in use, my pixel has taken some hard drops and has remained unaffected from the drop. I definitely recommend the fitment is great too.
I was interested in the Latercase but NO ONE has a month + to wait on a case for a 2k phone. You need a case right away preferably on the release date that's where Latercase is losing out on customers
@@petersanders6897 mine arrived in 5 business days
Do ya know 600d and 1500d?
Like Lexus max out vs Toyota LE
@@thinborne Relax. Getting defensive is bad for business. I'm just interacting with a RUclipsr I'm fond of watching
@@thinborne people would buy a Toyota supra over a Lexus IS300 any day of the week.
im waiting for my z fold 6 to be delivered and eyeing up cases, for the cost I dont think the case is good enough, id pay it if it was better, also as its my first fold im not sure wether i need to look at cases with hinge protection?
Edit
do these guys deliver to the UK?
i do like thin cases just unsure wether hinge protection required,
I probably read too much reddit
big fan that they included magsafe into all their cases. not sure why more phones aren't putting this into their devices by default since it's part of the qi2 standard now (i think?). i'm gonna be very interested in the pixel fold case review. zfold is not for me but if i pick one up for the upcoming pixel fold i'll be sure to use your link or code if you get one.
they do not know how good the magsafe is, loil
Why not Pitaka?
Pitaka was the brand that didn't fit the Pixel Fold correctly. It was a whole ordeal lol. They also haven't sent me anything since I talked about it. That could be a total coincidence, but it also happens to be true. If memory serves, they said they would send me a fixed version and then ghosted me.
I'd be happy to work with them again.
Maybe he prefers a more premium coating, the more expensive 600D aramid fiber, a clearer, thinner texture, and better grip?
@@thinborne fair points. But the difference is minimal and for those of us who have to actually buy the case, I’m not sure those very minimal differences equate to spending $30 more for basically the same thing
@@Markus56165 sure, please choose what works better for you, brother!
@@Markus56165 The better details, the front cover, and the Texas business needs your support.
I dont plan to upgrade from PF to PF2 or ZF6., and just went to their website to scope out a case for PF, but they dont even have one for PF? What gives, Thinborne?
We did! We actually sent it to my man Shane. The problem is, last year we couldn’t get it to fit correctly, so we chickened out and gave up. This year, we teamed up with the best aramid fiber supplier. They’ve got all kinds of connections, so we’re more confident and ready to release the PF2 (which is freaking 9 Pro XL Fold Ultra Max S).
Does this case mess with the swipe gestures at all?
Not that I've experienced
not at all
It would be great if they also offered a similar case with a pen holder.
please set a ghetto set up: ringke s-pen holder hahaha
Does the magsafe interfere with the s pen?
nope, the s pen works fine with our case
Clear case on this Crafted Black feels like Aramid case. I would Love a Matt Carbon Black Phone or Matt Carbon Black Z Fold 7 with Gold frames
Pitaka is another case with similar qualities. Feels so good in had without adding any bulk.
they are good. but we are striving for greatness. thank you for watching.
I went with the torras MagSafe case 👍
That's a great choice too
Same but I would love to have a clear case that's similar to the Torras one. Ringke should sell their slim clear case
@@UnknwnPinkstarbut i have a Ringke clear case (with magsafe) works well
Is it bulky or is it relatively thin? I do like the no adhesive factor so how it I holding up so far?
@YourD2SupportMain not bulking at all its my favorite case only had it a couple of days it's holding up well
i bought an aliexpress version, pretty much the same thing, works great (about 30usd)
Cheaper than what it costs us? 😂😂
Tell them to make the exact colors cases for the phones
good idea
Aramid fiber case or leather skin 🤔
why not both?
@@thinborne interest peaked!
I have the same Case for my ZF6. the only thing that could be better is if they start offering colors like RED,Blue,
Pitaka
@@Markus56165 get away, now! lol, hahaha
yep, we might be able to add them
@@thinborne additional colors and mixtures of colors would be amazing
@@thinborne haha
I dont know why samsung stopped making this case. I exclusively used it on my f3 until i got the f6
we make it even better, lol
Expensive but will consider them for my Pixel 9 Pro Fold looking at their site it looks like they have them as marked sold out already
We actually waited to test the phone case with the real phone before starting production. They should be available around August 2nd.
@@thinborne good to know Thx!
@TunedByJ it is out, buy now!😂😂😂
@@thinborne already did, looking forward to seeing the quality and such on the Fold!
@TunedByJ J ya made my day.
Every sales will make my wife happy, as she can keep shopping 🤣🤣🤣🤣
Patiently waiting for dbrand grip for the 6
you love the toxic robot, right?
@@thinborne the grip mostly
Nice looking case but missing hinge protection.
I've always used pitaka or Lews Latercase but will maybe give this one a go for my fold 6 if for no other reason to use your code and help out the channel!
Very generous of you!
thank you so much, i hope you can find our case enjoyable
not sure about this case. Once you opened it, the presentation was like for a $15 case from aliexpress. This is way overpriced.
I purchased the benks case its just the rear piece but its very slim i was in the same place didnt want bulk love z fold 6 build didnt want to hinder that
What one? I got the ArmorAir one but the fitment was horrible so I sent it back
@@ryan2824 armor air aurora
Lol there's way better case like these at a lower price, why are they charging $100 is beyond me. For example "later case" i have purchased the memumi brand for $55 bucks, and it looks, feels, and fits better than that $100 case, I'll give them $60 max.
😂 I can't help laughing.
Please research on Google about the 600D vs. 1500D,
plus the MagSafe.
I grew up with Lew Later and the iPhone giveaway accident.
I always loved the Latercase on my iPhone X. But the 600D is far more premium than the 1500D,
like Lexus vs. Toyota. ❤😂
I love that case! I wish i had known about it before i got the Terras case but i do love the one i got. I have the pink one as well and i have a transparent black case with a pink ohsnap ring which i highly recommend. Its super thin and keeps the fold in my hand. The ring matches the phone perfectly which - to me- looks like a Caucasian flesh color. No other way to describe it- but not pink haha
real men wear pink, i have pink too
Love my pink phone as well.
I love pitaka cases. Pretty much similar with magsafe capabilities.
I love pitaka cases too but I don't like they out their name on the case in a color. Ruined it for me
they are good. but we are striving for greatness. thank you for watching.
@@thinborne had the thinborne z fold 5 case but the one for the 6 is just so expensive and not shipping on Amazon for 2 weeks
@@PaulCotton sorry for the inconvenience, let me talk to my shipping team, and let them work overtime to solve the problems. ( jokes, i will ask nicely, and pay them extra)
@thinborne, I saw the google Pixel 9 Pro Fold thinborne case available for preorder on your website and ordered it. @PaulCotton, I will be waiting for your review on this.
they make their cases in china, they can bring this price down more. im passing.
Iphone is made in China.
So they should be 199 like 13 years ago😂😂😂
Instead of paying the thinborne markup, I'm buying from Aliexpress for a third of the price. It will arrive at the end of the month.
@@therealuncleben enjoy it, man.
@@thinborne will do.
I wish they made a phone completely in carbon fiber!
Expensive phone to not have any drop protection 😬 I'm very careful with my phones, but there's at least a few good drops every year that's unavoidable
To be honest with you, a tempered glass screen protector is more important.
Our cases come with one free glass screen protector, which makes it a solid protector.
However, the hinge is not covered, so that is something you need to consider.
This case is way more expensive than what its supposed to be, and the comparable to steel quotes is insane, i work at a steel mill and the quotes make me laugh about protection.
Well, you just made my day-I’ve been laughing all afternoon! This case is designed to give you that no-case feeling, not to survive a drop from a skyscraper. Pair it with a screen protector, and you’re all set. Next time, try reading the description before you whip out your wallet.
@@thinborne I'm glad I made your day, this still is overpriced for no protection, I like your dropping it off a skyscraper remark lol, it should for the cost😂, but their have always been other aramid fiber cases out there that give you that no case feeling at a better cost, I understand it's a business but be competitive because like every thing else.
I did actually buy one of your cases a awhile ago for one of my devices to compare it to another aramid fiber case(that was half the cost) and I found no difference in it at all, it actually was a better designed case than my thinborne one because of qc issues on the thinborne.
@@RJ_Uploads no freaking way, lol.
@@RJ_Uploads sorry for all the information, you have a great day
I love watching these showcase videos 😊 Hope you're doing well!
I don't know why these case manufacturers keep on pricing their cases based on the value of the device that it's being used for. It shouldn't be this way whatsoever. If they could sell their S24U case for $50 so why is this $90? Does the front little piece really worth an extra $40? Seriously it's appauldiing. No case should be $100 unless it comes with a built-in battery pack like back in the days. It's just plastic and whatever other material. It should just be price accordingly to the material that was used. I understand that it's a new device so they want to charge more but to me it tells me a lot about a company and will not ever buy from them.
Even the official cases from Samsung are overpriced but it's the OEM so I understand that it will always cost more cause of the exact fit and finish. I ended up getting the S-pen case from Samsung for $80. It's more expensive than what I wanted to pay for a case but I know it comes with an S-pen which to me is an added value to a case that should only be $50 alone. I wanted an S-pen and I needed a case so this was my best bet. I could've went cheaper and I sort of did with 2 other cases before this and they just didn't work right with the phone, It added too much bulk to the phone as well. I like semi-thin cases myself. I could do something like this in the video but the max I would pay for it would be $50. I believe you could find some generic brand using the same material for cheaper so there is always that too. I don't need a screen protector as I already have one on my phone.
It is based on our production, marketing, and operation costs. These cases are made of 600D aramid fiber, which is an expensive material. Plus, they are partially handmade, requiring skill and dedication. Even with that, there are still defect rates; we reject at least 20% of units during our three rounds of quality checks.
@@thinborne thank you for your reply. I still don't understand why the front cover is another $40 alone when it uses way less material than the back cover of an S24U. Since this is new I could understand a more fair price of $60-$70. I know eventually it will get to that price or even lower. At this time I won't get it for $90 and I know you're entitled to price it whatever you want as you do make them.
@@volcalstone You might think the front cover only requires a bit more material, but that’s not the case. We use two identical sheets for the back and the front. it does double the cost.
Man.. very similar case in aliexpress for less than half of the price. ik it might be cheap plastic, but shit it looks exactly the same
Just remember, all aramid fiber isn't the same. At all lol.
Thanks for the feedback. Ya can actually buy a Richard Miller for 1000. And barely nobody can tell the difference
I love my Latercase on my Pixel Fold
Latercase is good, but if you prefer a clearer, more detailed texture and better grip, remember that 600D aramid fiber is way better than 1500D. We use 600D, so we never think we are equal players. We will have Fold 2 cases ready in one week.
Better than lattercase😂 . Wish they make aramid case for zenfones.
lol, lew later will hate us, and he has 16m followers,
my god its expensive as holy god but at least it comes with a front...... Fkn pitakas fold 6 only comes with a fkn back and is still $70 Time to waste more fkn money
Unfortunately, good aramid fiber is pretty expensive. The cheaper ones you see are definitely not the same quality.
@@shanecraigtech lol, let him be a billionare and get temu version
Thanks for the vid, just ordered using your code
Hope you enjoy it!
thank you
我FOLD5 也是用這種殼 輕薄
您这个颜色可以么？
Texas based company 💪
Decent
you too!
It looks slippery..
Nope!
Really 90$ for these? It more just a skin instead… it not a case… just for looks? yeah. Surely good marketing here.
Far more durable than a skin. Aramid fiber is extremely durable and lightweight. It's pretty used by the military for body armor lol.
Latercase is much cheaper than this
Their cases do look quite solid, but I've never pulled the trigger on any of them before.
lol, yes! We use 600d aramid fiber, which has thinner, clearer textures, and it costs 30% at the material. Plus, we have magsafe built-in. I love Lew Laters, the case is good, not cheap.
Just grabbed one with your code. These thin cases are my favorite, usually I rock these phones caseless, but this is the next best thing.
thank you so much, i hope you can find it enjoyable
Ali express ftw
My case has a hole by the camera and their customer service sucks and they act like your stupid and that their product is the best thing on the planet.
Haha, I'm laughing hard, bro.
There's a microphone 🎤 on the cameras for better video quality with sound.
If your case doesn't have a small hole, it's defective. 😂
BTW, even though we run a business, we are still human beings.
We are respectful.
😂 Bro, you make me laugh.
Samsung offers a tiny microphone on the edge of the cameras, so when you take videos, the sound quality will be great.
If you've got anything without the tiny hole, that's called a defect. ❤
Easy, we respect you, but we're still human beings who love to tease a little, Texan style. 😂
Fun fact putting a case on this phone is blasphemy.
Why?
@@steverhodes9743 I guess do it and see for your self lol
89$ ??? No thanks.
you are welcome
90 dollars for this case is just stupid
Maybe spending $2000 on a phone is even dumber!
.
thank you so much, bro! nice review!
Looks nice but does not have the hinge protection.
Any case without the hinge protection is a no for me. Protection is my first priority.