Это видео недоступно.
Сожалеем об этом.
Conlux CV3 Bill Acceptor - How to program $5 $10 $20 bill acceptance in the field
HTML-код
- Опубликовано: 18 авг 2024
- With a Conlux CV3 Bill Acceptor installed in your vending machine. Learn how to enable and disable $5 $10 $20 bill acceptance. This can be done with out removing the dollar bill acceptor from your drink or snack vending machine. Please LIKE and SUBSCRIBE if you found this video useful.
☀ Affiliate links that help support the channel ☀
☞ Purchase items from the Nayax Online Store: nayax.pxf.io/vms
Be sure to use promo code VMS at check out and receive a discount on your purchase!
♨ Buy Me A Coffee: www.buymeacoff...
- Chapters -
00:00 - Intro
00:55 - Conlux CV3 Service Mode Button
01:38 - Accepting $20
02:35 - Accepting $10
02:47 - Accepting $5
03:28 - Outro
== Music ==
Intro music by: Zen Pusher Gasoline
Bandcamp: zenpushergasol...
SoundCloud: / zpg
RUclips: @ZenPusherGasoline
#vendingmachine
#vendingmachines
#vendingmachinebusiness
Alex has saved me so many times. Great cideos
Glad to help
Thanks Alex for your help. This video was really useful. I'll keep watching your videos to learn more about vending machines.
can you do a video on how to trouble shoot bills being inserted but not going into stacker and how to disconnect and change it?
This is just in time for me. 👍🏾
Happy you found this useful.
Very helpful! Thank you!
You are welcome.
Hi Alex, do you have to power the entire vending machine or unplug the Conlux at a connector? Another question or clarification: if the Conlux still doesn’t accept the bill, it could be a machine configuration. Do not accept bills if change can’t be dispensed, yes?
Hello, I would like to know how to configure it for the currencies of my country and use it in pulse mode.
What if the bill acceptor doesn’t have any lights and not working? What can cause this
My machine will not accept bill into machine
My ams combo machine has power from the outlet all the way to where the inside and outside power cord meet. That’s it motor and display don’t come on. Can’t figure it out Any ideas
Make sure to check the FUSE that is located at the bottom of the machine on the right hand side. Just below the ON/OFF switch (if it has one) and where the compressor plugs into the machine. This fuse box can some times works its way loose if the machine has recently been moved.
These look and program EXACTLY like the new CPI bill acceptors.
They basically are CPI bill acceptors. MEI / Conlux was purchase by CPI in 2012.
Hi Alex
Do know where or how I can get a coin mechanism to accept monies other than the US.
Need several programmed for Jamaican coins!
Apologies if Ive asked you before
Sadly I lack the knowledge for non US currencies to point you in the right direction with any confidence. I am sorry.