Please add the ability to change the color of the dimensions!! Black dimension lines are sometimes hard to distinguish from the black lines of the part.
Hi: ISO standars for technical drawings tell the line size must to be more thickness if you compare it with lines used for sketch dimension. By default Fusion 360 use a single line. My question is how I can set every line when I use the drawing mode in order to differentiate the drawing from the box? Thank you vey much
I have a drawing in portrait position but in 1 particular sheet I rotated the part 90 deg to be read as landscape. But I can't find the way to rotate the dims in order to be read in this position. There is a way to do that?
Is there a way to turn orthographic views into a 3D model automatically with this software? I am not sure if it is even possible! If you can reply that would be great! Thanks.
It's kind of weird that all the features get added to the browser. I see it's only available when you aren't capturing the history, which means no timeline. It just feels out of whack from the way features are handled normally in Fusion. Good to know it's there though :-) However, other than pattern support, what's the point when you can just direct edit whatever you need to change?
This is great to know. But how can one dimension an angular bolt pattern. I have 3 holes and they are all 120 degrees from each other. I tried to dimension that but cant do it in Fusion 360. Any suggestions?? Thanks Manny
Hi Aaron, I am brand new to Fusion 360. Your tutorial was very helpful to me so thank you for taking the time to put it together. I have a question about updating and saving a component after creating a drawing as you did in the tutorial. When I go back to the drawing, instead of being updated, all of the dimensions are "disassociated" from the component and have yellow alert boxes on them. To fix it, I have to go back and re-associate them. I've had to do this each time I have updated the original component. Any ideas of what I might be doing wrong? Thanks again for the great tutorial!
When you're making an annotation, this dialogue should come up: help.autodesk.com/view/fusion360/ENU/?guid=GUID-19DE0863-E9CF-4D0A-A6A0-A738A92628BD Per the arrow size, I believe this still rings true: forums.autodesk.com/t5/fusion-360-design-validate/changing-arrow-head-on-leader-text-in-fusion-360-drawings/td-p/6888162
After I create my projection and even export it to Autocad, how can I break it into primitives that I can edit? For example, I'd like to change the radius of the fillet in 2D.
A chamfer is more of an "applied" feature, that will be done outside of the sketch environment. Otherwise, a swept cut might work... However, since this is in regards to a drawings webinar, I think you mean how to document it in the drawing. Unfortunately, there is not a specific tool to do this now, so its a manual process that will not retain the parametric link, but make sure to vote in the Ideastation to get this ability: forums.autodesk.com/t5/fusion-360-ideastation/chamfer-notation-in-drawings/idi-p/7622150
Srovnat natočený díl. Okótovat tečné oblouky - nemožné. Jen malý příklad, výčet může být mnohem delší. Proč tam přidáváte nové funkce, když nefungují naprosté základy? Výkresové prostředí je v tuto chvíli těžký nedodělek. Navíc velice často zamrzá, strašně dlouho se načítá, prostě není to profi práce, ale zmetek. ( stav - 02-2024)
Please add the ability to change the color of the dimensions!! Black dimension lines are sometimes hard to distinguish from the black lines of the part.
I been through loads of video's about soft . but you are the best thanks for your video's.
Hi:
ISO standars for technical drawings tell the line size must to be more thickness if you compare it with lines used for sketch dimension. By default Fusion 360 use a single line. My question is how I can set every line when I use the drawing mode in order to differentiate the drawing from the box? Thank you vey much
Hii. I have an issue. Every time I made a projected view, the views always shows inverted. Please is there a way to get it just like in the video?
I have a drawing in portrait position but in 1 particular sheet I rotated the part 90 deg to be read as landscape. But I can't find the way to rotate the dims in order to be read in this position. There is a way to do that?
Shouldn't the upper milled pocket be shown on the section A-A view. It appears to be missing
Is there a way to turn orthographic views into a 3D model automatically with this software? I am not sure if it is even possible!
If you can reply that would be great!
Thanks.
Can you tell me how to set up for 13 x19 paper or if that is even an option
It's kind of weird that all the features get added to the browser. I see it's only available when you aren't capturing the history, which means no timeline. It just feels out of whack from the way features are handled normally in Fusion. Good to know it's there though :-) However, other than pattern support, what's the point when you can just direct edit whatever you need to change?
This is great to know. But how can one dimension an angular bolt pattern. I have 3 holes and they are all 120 degrees from each other. I tried to dimension that but cant do it in Fusion 360. Any suggestions??
Thanks
Manny
Sketch with points, reference the points for the holes.
how to flip the direction of A-A section?
Hi Aaron, I am brand new to Fusion 360. Your tutorial was very helpful to me so thank you for taking the time to put it together. I have a question about updating and saving a component after creating a drawing as you did in the tutorial. When I go back to the drawing, instead of being updated, all of the dimensions are "disassociated" from the component and have yellow alert boxes on them. To fix it, I have to go back and re-associate them. I've had to do this each time I have updated the original component. Any ideas of what I might be doing wrong? Thanks again for the great tutorial!
How to control the text size, arrow size etc. in dimensions in Fusion360?
When you're making an annotation, this dialogue should come up:
help.autodesk.com/view/fusion360/ENU/?guid=GUID-19DE0863-E9CF-4D0A-A6A0-A738A92628BD
Per the arrow size, I believe this still rings true:
forums.autodesk.com/t5/fusion-360-design-validate/changing-arrow-head-on-leader-text-in-fusion-360-drawings/td-p/6888162
Very helpful
After I create my projection and even export it to Autocad, how can I break it into primitives that I can edit? For example, I'd like to change the radius of the fillet in 2D.
Go Wolf Pack!
Love Reno. Born and raised there. If you're still attending UNR, don't underestimate the importance of that 'engineering communication' class.
how we create a chamfer in a sketch?
A chamfer is more of an "applied" feature, that will be done outside of the sketch environment. Otherwise, a swept cut might work...
However, since this is in regards to a drawings webinar, I think you mean how to document it in the drawing. Unfortunately, there is not a specific tool to do this now, so its a manual process that will not retain the parametric link, but make sure to vote in the Ideastation to get this ability: forums.autodesk.com/t5/fusion-360-ideastation/chamfer-notation-in-drawings/idi-p/7622150
ok,thanks
also, can you recommend me some free ebooks or video courses for the cam-cad area ? i am a total begginer in the milling -cnc area but i want to learn
Zip over to Lars' channel: ruclips.net/user/cadcamstuff
And website: cadcamstuff.com/
thank you very much :)
The worst tNice tutorialng soone can do after starting is quitting... never give up and the rewards will be greatly appreciated
Srovnat natočený díl. Okótovat tečné oblouky - nemožné. Jen malý příklad, výčet může být mnohem delší. Proč tam přidáváte nové funkce, když nefungují naprosté základy?
Výkresové prostředí je v tuto chvíli těžký nedodělek. Navíc velice často zamrzá, strašně dlouho se načítá, prostě není to profi práce, ale zmetek. ( stav - 02-2024)
Why is the University you went to so important?
Sure, background is always worthwhile