Hope you guys like the video. I forgot to mention I buy the chips from UTSource. If you don't want to deal with them or buy from china for some reason you can find this IC inside of the corvette clusters it has 4 of them in it. I can also sell you the IC but it will be more than buying it from UTSource because I prefer not to be parts seller. I can also do this work for you. If you need to contact me my email is in the about section or you can just post in the facebook group linked in the description.
Glad I found this video, I’ve got an 02 Escalade cluster and occasionally the trans temp gauge just stops working and pressing or pulling on the cluster in spots seems to fix the issue I’ve also had the issue where the cluster acts like it restarts (I replaced the clip and that helped, that tab was broke) it would do that more in colder temps But on the transmission gauge where would be a good spot to start looking? Such as solder joints I ran around with the bezel off for a while and if I reached up behind the cluster just to the right of the speedometer with one finger and barely pulled towards me it would behave
@@FixedUntilBroken I am sorry for recomand you the extension module sow I put my friends of jbc to make some research for your station . I found out it is a JBC CD-D series and I descover your station is compatibile with C245 .
@@andreiciora2765 Its fine.thanks for looking into that. I didn't even think about the fact that the c245 might not work with the CD-1D so thanks for asking them. BTW my station has 395 working hours and 1604 sleep hours on it. 9201 Hibernation hours. I think the last owner never turned it off.
@@FixedUntilBroken Thanks for the reply. I understand your answer, but on your response to people not looking for answers, I spent over a month trying to get information on several cheap video cards trying to fix them and I could not find a schematic or anyone that would help find information even though I tried on several different sites. You have to know where to go and what to ask for and if you don't know you might never get any help. The video cards have been setting for 6 months now! I did get allowed access to the site shortly after I left the message for you. They seem to be more inclined to help hobbyists then most. Thanks again for your videos.
@@FixedUntilBroken I guess the problem is that I don't seem to know quite how to go about doing the search to find what I need. Maybe someone might step up and do a video on how to properly do searches 👍👍👍👍. I can't be the only one having issues. Thanks for responding.
Video cards really aren't something I know about and the group is automotive electronics repair group. I'd suggest reddit r/electronics or a Facebook group about computer electronics for something like that
@@FixedUntilBroken Thanks. I have been interested in electronics for cars for ever. My point was just that I have never had any luck searching for help with Google and more or less I wish people would show how to find the information on the different repairs and projects they are working on would be great. I am sure many would like to know how to find it and follow along with you. Thanks for your time.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Hope you guys like the video. I forgot to mention I buy the chips from UTSource. If you don't want to deal with them or buy from china for some reason you can find this IC inside of the corvette clusters it has 4 of them in it. I can also sell you the IC but it will be more than buying it from UTSource because I prefer not to be parts seller. I can also do this work for you. If you need to contact me my email is in the about section or you can just post in the facebook group linked in the description.
What year corvette cluster
This is definitely something i need to learn. So many of these at the junkyard that ppl over look.
Nice to see you back working on project videos again. I hope everything is well with your wife and kids. Thanks again for another great video :)
Thanks! Things are going good. I have huge to do list I hope finish this week.
Another great vid!
Glad you enjoyed. We should do that next zoom soon!
Glad I found this video, I’ve got an 02 Escalade cluster and occasionally the trans temp gauge just stops working and pressing or pulling on the cluster in spots seems to fix the issue
I’ve also had the issue where the cluster acts like it restarts (I replaced the clip and that helped, that tab was broke) it would do that more in colder temps
But on the transmission gauge where would be a good spot to start looking? Such as solder joints
I ran around with the bezel off for a while and if I reached up behind the cluster just to the right of the speedometer with one finger and barely pulled towards me it would behave
Hey I was wondering if you would know where to find a scan of the overlay for these 99-02 cluster so I csn try to make a 7k rpm overlay
Great video Matt!
Thanks! I am glad you liked it. I am happy with the way these last few videos have been turning out.
Thanks for the great video!
Glad you liked it. Thanks for watching!
Nice video man also I have 2 great news
Great!
@@FixedUntilBroken I am sorry for recomand you the extension module sow I put my friends of jbc to make some research for your station . I found out it is a JBC CD-D series and I descover your station is compatibile with C245 .
@@andreiciora2765 Its fine.thanks for looking into that. I didn't even think about the fact that the c245 might not work with the CD-1D so thanks for asking them. BTW my station has 395 working hours and 1604 sleep hours on it. 9201 Hibernation hours. I think the last owner never turned it off.
@@FixedUntilBroken olso I found a CD-2D station with C245 of ebay at a amazing low prize of 249 dolars .
@@FixedUntilBroken no because evrey JBC station worck with bouth ( C245 ,C210 ).
Great video bro!!
Appreciate it!
hello, would you perform this modification on my 2001 Silverado and if you do is there a contact number? thanks
Can I send you mine and a usspeedo face for a trans temp and cluster rebuild?
Yes I can do that
@@FixedUntilBroken I sent you a email
How much does this cost to do one
Too bad the Facebook group seems to want you to know answers to things you want to learn to join the group! Thanks for the video.
Answers are very easy to find on Google. It's to weed out all the spam bots on Facebook and to avoid members not willing to search for an answer
@@FixedUntilBroken Thanks for the reply. I understand your answer, but on your response to people not looking for answers, I spent over a month trying to get information on several cheap video cards trying to fix them and I could not find a schematic or anyone that would help find information even though I tried on several different sites. You have to know where to go and what to ask for and if you don't know you might never get any help. The video cards have been setting for 6 months now! I did get allowed access to the site shortly after I left the message for you. They seem to be more inclined to help hobbyists then most. Thanks again for your videos.
@@FixedUntilBroken
I guess the problem is that I don't seem to know quite how to go about doing the search to find what I need. Maybe someone might step up and do a video on how to properly do searches 👍👍👍👍. I can't be the only one having issues. Thanks for responding.
Video cards really aren't something I know about and the group is automotive electronics repair group. I'd suggest reddit r/electronics or a Facebook group about computer electronics for something like that
@@FixedUntilBroken Thanks. I have been interested in electronics for cars for ever. My point was just that I have never had any luck searching for help with Google and more or less I wish people would show how to find the information on the different repairs and projects they are working on would be great. I am sure many would like to know how to find it and follow along with you. Thanks for your time.
How can I contact you?
email is on the about section of channel. you need to be on a PC to view it. Doesn't show up on phones. not by my design but google/youtube.
My tachometer works then works
Do you know an easy way or reference to tell the year on these 99 to 02 clusters? Thanks
Pretty sure 99 will have two air bag LED's and 00-02 will just have one.
@@jeffescortlx Thanks Jeff. I will check that among my collection of cores.