There are 3 Phillips head screws at the top of the panel then I believe the panel sits on 2 supporting " lugs" . Lift up on the panel and pull straight out.
How to remove the bottom panel? Your video only shows it off at the start and then it's on when your all done. I see the two bolts on each side. I pull up and bottom is detached, but can't get the top to come off.
The clicking sounds usually indicates the burner flame isn't being sensed so it will click or spark until a flame is reached. With a small SOS pad or sand paper , you can clean those flame sensors. They are under each burner cap.
I didn't unplug power if that's what you meant. I just left the gas oven know turned off. I left a link on another comment regarding the part model if needed.
There are 3 Phillips head screws at the top of the panel then I believe the panel sits on 2 supporting " lugs" . Lift up on the panel and pull straight out.
How to remove the bottom panel? Your video only shows it off at the start and then it's on when your all done. I see the two bolts on each side. I pull up and bottom is detached, but can't get the top to come off.
My igniter just went out for the 2nd time in the 4 years of having my 48” NXR entree oven. 😢
This video was actually my 2nd time changing it. Thankfully it's cheap and easy for the most part.
Hi nice info. I have a 32 in Nxr and the stove is horrible. It would keep clicking on every burner. Any info on how to fix this ?
The clicking sounds usually indicates the burner flame isn't being sensed so it will click or spark until a flame is reached. With a small SOS pad or sand paper , you can clean those flame sensors. They are under each burner cap.
When the igniter went out, did the oven just smell like gas and not get hot? When on?
Mine smelled like gas, and would get hot but not at the temperature I set it at. I believe mine is the igniter.
Yes, the gas valve opens for a small amount of time but doesn't ignite.
How did you remove the panel on the bottom
There are 3 screws holding the panel in . I believe the panel also sat on a small " lip" to hold it up while you remove the screws.
Why did you put the new one upside down compared to the original one?
It was the same position. It's probably just my camera angle in the video.
Can't find that on Amazon. Can you post an actual link?
ERP IG9998 Universal Gas Range Oven Igniter, multicolor a.co/d/iLRjJaR
RUclips isn't allowing a link for some reason. Here's the description on Amazon.
ERP IG9998 Universal Gas Range Oven Igniter
Do you need to unplug anything?
I didn't unplug power if that's what you meant. I just left the gas oven know turned off. I left a link on another comment regarding the part model if needed.