MAKING TRENDY BUBBLE CANDLES
HTML-код
- Опубликовано: 19 окт 2024
- Bubble Mold
amzn.to/31vOkOY
Mica Powder
amzn.to/3008MqW
Dye Chips
amzn.to/3Gdz4W7
✨find me here✨
Use code RUclips20 for 20% off
jusnikcandleco...
✨Instagram✨
/ jusnikcandleco
HELPFUL CANDLE MAKING SUPPLIES FOR STARTERS
wick trimmer amzn.to/3lBXyAs
wick holders amzn.to/3doz3lG
thermometer amzn.to/3doERfa
pouring pitcher amzn.to/3lEwtg6
wax melting pot amzn.to/3xW4w8g
rubber spatula amzn.to/31ymh1c
heat gun amzn.to/3uLTxfU
scale for FO amzn.to/3c5g5Qf
scale for wax amzn.to/381sV0m
SHIPPING SUPPLIES
fragile sticker amzn.to/3sCojFZ
shipping boxes 1 amzn.to/2Prtv1j
shipping boxes 2 amzn.to/380NUR1
shipping boxes 3 amzn.to/3q3CZvZ
packing peanuts amzn.to/3bQrPFZ
bubble wrap amzn.to/3sDw7r8
packaging tape amzn.to/2Of4R2Z
shipping scale amzn.to/3c5jheH
#trendycandles #bubblecandle
Business Inquiries: info@jusnikcandleco.com
✨equipments used✨
Printer amzn.to/2OBMQfH
Camera amzn.to/2LNiYf9
Good Feeling by Roa / roa_music1031
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/-good-f...
Music promoted by Audio Library • Good Feeling - Roa (No...
--FTC disclaimer--
this video is not sponsored. Some links in this video may contain affiliate links in which I earn a small commission which is of no cost to you if you are to use any of the links to make a purchase.
All the hours I’ve spent watching candle making videos on YT, yet to see anyone else perfectly measure out different colours like you did. My OCD is pleased.
I’m glad!! 😁❤️
By far the most informative video I’ve seen on making these, thank you so much for being willing to share your tips❣️🙌🏾
Anytime ❤️
I've seen some people use a soft blanket or a folded over towel under the mold when pouring to prevent the flat spots on the finished result. Silicone must be thinner on the larger molds so more flexible.
I love having candle videos in the background while im working. This was so beyond satisfying. Such pretty colors too! Thank you for making this video :)
Thank you! 😊
Probably a soft towel underneath the mold can prevent the bumb. The weight of the wax is pushing the mold against the hard surface and causing the bumps
Thank you!!
hello !! Can you tell me how much paraffin do you use to make just one bubble candle? THANK YOU !!
Hi! I love your colorful pastel candles. May I know that is the ration of your parasoy wax? Im still strugling in my experiment that I can't get the right ratio of my wax. I hope you read my comment. Thank you :)
How much time should be kept for setting the candle..n after wt time should the ice cream stick be removed
I'm having the most difficult time with my wax, I won't ask for any trade secrets, but do you recommend Parasoy blends for molds/pillars? I'm currently mixing IGI 4625 and GW 464, it's nice but not the easiest to do. I'm also going to try co BW-925 and Ecosoya PD Pillar, Fingers crossed!
Another great video and super aesthetic, Love all your work!
You can ask for trade secrets I honestly do not mind. And yes i recommend parasoy blends for molds/pillars/tarts. I worked with GW 464 and i hate the wax because its very temperamental. Lots of people had luck with it i wasnt one. IGI 4625 is great on its own i would mix it with 464. Try Nature’s Garden Pillar of Bliss wax and Flaming Candle problend 650 volative and tart wax those are reallllllllyyyy good for molds i use them both currently. If you are trying to stay mainly soy I unfortunately cannot help i tried and it didnt work for me so i went with parasoy
@@JusNik hiiii where did you buy the wax I’m having trouble with my soy wax as well
@@JusNik thank youuuu! I feel the same now 464 is not for me, but I’m finally having better luck with some of the bw-925 for pillars, and I’m back to my usual parasol for containers! Love your channel thank you Nik 💗✨🦋
Hiiii just bought the wax today thank you for this reply I’m going with Thai one because I’ve been so sad knowing that soy wax wasn’t working for me
@@MegaRbailey let me know how it works out for you!
Hello what’s the best thing to melt your candle on ? It gets stuck to glass plate and stainless steel
Hey
Excellent video
Can reuse the mould ?
Halo, i have problem. My candle was crack on the bottom, can u give me any tips? I used palm wax for the candle
This is for bubble candle? If you pour the wax too cool/ temperature lower than it should be, the candle will cool or solidify way too fast then it can cause cracking.
The colours are so beautiful 😍
Thank you! Cheers!
Wonderful video, it was so informative and I loved your choice of colors for all the bubble candles. I was wondering if you could share with me where you get your wicks/ spool for the What size is the spool? Thank you!
Thank you and i got the wick from AnythingBees on etsy. Cotton squared wick. It will tell you what size to get based off the size of your mold. I had #3
At what price should the bubble candle be sold?
Do you grease the molds with any type of oil or anything else?
I mighty have missed this but how long to they have to settle? I read elsewhere that pillar candles need at least 3 weeks to settle properly. Is that true? By the way those colors are sooooo cuuuuuute!
I removed them from the mold after 24 hours
hello :D what did you use to dye the colors? thank you!
I want to know this silicone mold, where can I find it?
What kind of wicks you use
Is Soy Wax suitable for mold?
Hi,
M so happy to come across your video ...
May I know the what kind of thread u r using is it...soywax coated..
Also could tell d poring temperature..
N temperature of when to add d fragrance plz..
And
in one candle mould how much fragrance should v add
Hi its cotton braided wick for 2-2.5” molds and the temperatures i used are specific for The Flaming Candle Problend wax so if you’re not using the same wax it wont work for you.
Thanks nik for the video, question where did you get a skinny metal stirring rod from?
You’re welcome and amazon if you search bar drink mixer it should come up
@@JusNik thanks hun
Loved your video! What was the melt and pour temp for your soy pillar wax? I’m still getting a bit of frosting on my candles. Keep up the amazing work! Subscribed!
hi sorry I just saw your comment hope I’m not too late but the pour temp was 175 for the bubble candles and sometimes when the temp drops too quickly it was in the 160-165 region
Hi..loved your video..but my bubble candle has lots of frosting and sinking hole..plesse help
It depends on the wax you are using also frosting is normal with soy wax and even mine have a bit of frosting. As for sink holes, pillar/mold candles generally require a second pour because of extreme shrinking
Hello. Where do you buy the molds from ? 😊
Hey can you tell al the temperature needed . Like what sould be the temperature while pouring it into the mould and what should be the temperature while pouring the oil
The temperature isn’t universal. It has to depend on the wax you are using. And every wax manufacturer tells you temperature to pour and what temperature to add the oil
Beautiful!!
Thank you
So beautiful 😍 I've heard people say mica colors clog the wick.. Didn't it happen with you? Also I've seen people say their pillars are 100% pure soy wax n no blend.. Is this even possible? 🙄
I havent had that issue but its possible because i use a very small amount. Yes soy pillar wax exist lol but I personally believe that pillar blends are better but thats a personal opinion
What wick did you use here? Xo
Wat wax you using n where you getting this silicon mould pls let me know tq mam
The wax is from the flaming candle and nature’s garden and the mold is from amazon. Links in description for every item.
Hi, any tips on how to prevent spillage at the bottom of the mold? I made one candle and it turned out great, but with the second one, 1/3 of the wax seeped through the bottom of the mold.
Use some blu tac to cover the hole at the bottom before you pour the wax and it should stop it leaking , just place some blutack over the hole on the outside where the wick comes out
kindly let me know when do u start pouring the wax to your molds , when it reach to which temp?
it will depend on what wax you’re using and the temp the manufacturer says to pour it.
What do call those colour dyes as
What type of wick is that, and did you use mica powder. And can you use that wick on jar candles.
the wick was a braided wick meant for pillar candles so it cannot be used in jar candles. yes I did use mica powder.
Heyyy, how do you prevent your candles from frosting? My colored ones frost so much. Some tips and help would mean so much! Love the colors. Your candles are beautiful 🥰🦋
Hii! I do have a bit of frosting on some of the candles but the only things i do is make sure the thermostat is set to room temperature throughout making and curing so consistent temperature and mix the wax slowly, i also mix my waxes. A bit of paraffin in both my waxes. Frosting is very normal in soy wax especially ones with dyes. I would suggest you play around with uv inhibitor if your frosting is really bad. Hope that helps ☺️☺️
Warm the molds with heat gun before pouring give it a try and let know 😀
Hi, I love to watch your videos! Your candles are so pretty!😍 Unfortunately I always have the problem that my candles are kind of sticky and have white residue. Do you or anyone here have tips on how I can prevent this? 😩
Are you using tart wax? Sounds like one of two issues:
1. You’re using container/jar wax instead of tart wax
2. If you are using tart wax then you’re pouring when the temperature is too hot
Those are super cute
Thank you!
What type of wax u use...can i use soy wax? Or can u suggest the best wax to making bubble candle...
I use parasoy and yes you can use soy wax just make sure it is tart or mold wax and not jar wax
Hey I did a burn test and was seeing How do they suppose to burn ?
They dont burn like regular candles, after an hour or so the wax will start leaning to one side and burn in that direction
Hi! Do you not need the metal wick holder underneath like how you'd do a candle in a jar? Is it not necessary and do you just trim both ends after?
I use the wooden craft sticks to hold the wick centered in the bubble mold then trim the wick facing up very low
Where do we get these moulds...I gave silicone mould
From amazon the link is in thr bio
Hey. When you say to wait for the pouring temperature? What is that temperature?
It depends on what wax you are using to make the candles, the wax supplier will tell you what temperature.
@@JusNik after watching several videos after yours, I realized that lol. Thank you.
@@ebbybabyy wish I could give a temp that would help you. im sorry
What type of wax is used in wax? And the temperature of pouring into the mould
it’s pro blend 650 and poured between 70 and 75 degrees depending on how fast the temperature of this wax drops
At what temperature you're adding color and oil...
At what temperature you're pouring it
Are you using problend 650? If not the temperatures for that wax wont work if you’re not using the same wax
Hi. What is the wak's temperature?
Every wax temperature is different if you arent using the wax i used the temperature wont work for you
Thanks for the fun video , keep going :)
Thanks for watching!
Hi is that a Parasoy? I've been working on Palmsoy, it's giving me frosting problem 😔 Can you share the temp level for, melting, mixing (color/scent) and pouring for Parasoy? Thanks.
Hii! So in this video is the flaming candle pro blend 650, their older version it now comes in pastille i think but it is parasoy. As for the temp it depends on what wax so i cant give you specifics. FOR THIS WAX i melt it to 185 and add the dye right away. I add the scent at 175 and pour at 165.
@@JusNik Thank you 🙏 ❤️
Hey, what wax are you using ?
Thank you so much
Can you reuse the mold even though the wick hole is there? Does the threading ensure it doesn’t leak?
yes you can reuse the mold. if you make the hole the same size of the wick it won’t leak
Which wax is good to make candle
There is no better or best wax its personal preference.
So pretty and perfect ❤️
Thank youu ❤️
Hi love can u send me link to the needle
You are using, all my needles won't fit into the hole
www.amazon.com/dp/B08F23SJPH/ref=cm_sw_r_oth_api_glt_fabc_D63D9GFKADYH2033H387
@@JusNik thank u so much
Great video. Question though. I know you said each mold holds 5 oz of wax, but how much FO.? How much FO to wax you use? If you don’t mind answering? Or you don’t use FO with the bubble candles?
thank you! so the 5 oz is total of wax and FO. my bubble are lightly scented so I use 5% FO
Mine tunnel at the bottom what should i do?
Can you send me a picture on instagram please?
At what temperature do we add the colour ?
are you using the same waxes I’m using?
Hello! I’ve been making these and I’ve been trying to solve how to make them stop being wobbly. Everytime I cut the wick at the bottom they never sit straight, is there someway to prevent this?
is it the mold that is wobbly or the wick itself? for mold I put the wick in the crease of the mold so the mold isn’t sitting on it
hello! I had that same problem doing my first candle, all I did to prevent it was putting the mold over a folded towel and made sure that the wick wasn’t covering anything and they never came up wobbly again!
hope this helps
What wax did you use?
PB650
Those are so pretty, where did you get your dye for you candles:)?
dye chips from flaming candle and mica powder from Amazon
@@JusNik is the mica powder to create color or just to add shimmer?
Where did you get the wick string from
Etsy shop but I don’t remember the name. once I find it I’ll comment on this comment
the shop is called AnythingBees
Its going to fast.. what temperture the oil has to be?
It depends on the wax you have. The seller will tell you
Where do you buy your wicks and what kind do you buy?
A shop called AnythingBees on Etsy but now they only have beeswax wick and Eco Series braided wicks
@@JusNik can you use that wick for paraffin wax when you make candles in a jar.
I’m using the same mica powders but for some reason most of the color sinks to the bottom of the mold. What am I doing wrong?
Ive never encountered that issue before so I honestly cannot tell you what to do to fix that. Are you mixing the mica with other colorants before you pour it into the mold?
@@JusNik No, just the mica powder on its own. I’ve tried different waxes, different temps when mixing it in, but it keeps happening 🙄. Maybe I’m using too much
@@alexispullard5072 I use mica powder and dye chips. Maybe try using another colorant with the mica and not just the mica powder and see what happens.
Hi how much para do you use? Is it 50 50?
No i use 10% of my 255g wax per jar which is 25.5g of parasoy
@@JusNik it is for bubble candles right? Mine keeps frosting and cracking and iam left disappointed all the time😢
Do you think mica powder is good for colouring the candles?
I actually use mica mixed in with the dye chips to color my bubble candle and snap bars but havent tried it in container candle
@@JusNik where do you get the colores you used in your candles?
can you pleaseeee share with me the link
@@camilaherrera6676 both on Amazon. The links are in the bio.
Hi please how much to wax I need to make 6 candle
Hi Emma i use 846g total of wax and fragrance oil for 6 molds. 141g for each mold
Is the wick wax coated?
No its not
@@JusNik Ok thank you 🙏
How would I repair a sm hole in ome
Im not sure…im been thinking on it wondering how the hole would happen. There is no way to fix it outside the mold
Hi! How much colorant do you add ?
Hi! Unfortunately I dont know the set amount since i use dye chips and mica powder but its an extremely small amount
what is the right temparature to add oil?
It depends on the wax you have, every wax has a different temperature to add oil
Thanks
What is the name of the wax you used for bubble molds? Is the soft soya?
hi it’s pro blend 65O from flaming candle and pillar of bliss from nature’s garden
Hi lovely! Do you mind me asking what colours you’ve used here? They’re so cute!!
Do you mean the name of the colors? Example ivory etc? I used mica powder and dye chips
Hello!! Do you use any additives or it is just pure soy wax?
My candles are not perfect always and i don’t know if i need anything else...
Thank you!!! :)
Hi! I use soy wax with a tiny bit of parasoy. What issues are you having?
@@JusNik Thanks for respond me! Just in the side where is the wick has small cracks..
@@JusNik i don’t know what is parasoy.. 😕
Its paraffin and soy mix wax
@@JusNik thankssss 💚
hi! I love your job, I would be so grateful if you could answer these doubts that I have..
well i started doing these and when I take them out the mold they look like transparent if that makes sense.. I want them to look “creamy” as yours but I have no idea what I’m doing wrong :(
second is that they always get a “hole” in the back of the candle, also i don’t know why?
ty
Hi hun
I have never encountered transparent candle before. I know crystallization can make it lose its luster and color but not become entirely transparent. If you mean the colors look very light almost non existent then add more dye. I use dye chips and mica powder in mine.
A hole where the wick is or opposite to where it is. You might also want to check your mold for anything that could be causing the hole. Or indent.
Hi!! I made a bubble candle with tart soy wax it came out beautiful but with lots of frosting (notable because it is a pink candle) how can I avoid it? If i make one without coloring will the frosting be noticeable too or not so much?
Hiiii! Frosting is inevitable unfortunately but color does make it stand out more. The only thing i can recommend is pouring the wax at a lower temperature and if you dont have to, do not use dyes.
How long do you leave the candles to set
I usually leave them 6-8 hours
@@JusNik tysmmm
Hii! At what temp do you pour into your molds ?
Hi i pour at 175
Have you sold allot of these just wondering
Im not sure what a lot to you mean but ive sold over 30 which for me isnt a lot.
@@JusNik I just ordered the molding to make candles like this wanted to ask were did you buy the wick wax string ?
Question love the white bubbles are made from the pillar mold while the other ones were not pillar mold?
They are all from the pillar mold
@@JusNik so which soy wax do you think is best for moulded figures? I've been having little holes on the top of my skull heads I tried all temperatures (I'm using the flakey wax) I just realized I'm suppose to be using pillar. Do you have any recommendations on the best one to use for silicon mouldds?
@@ranasawah9198 OMG Im only just seeing this im not receiving all the notifications as they come in. I use pillar of bliss from natures garden or problems 600 from flaming candle. Those are the only two I've ever experimented with and they are really good
ye mold kahase milega
really wish I understood this
The white moulds you have are thicker prevented the tops from being flat uf you lay folded towel under your 6 cell moulds they shouldnt flattened the top, love your video by the way! 💖💖
Thank you, someone mentioned the exact same thing!! And thank you!
Hey Nik, I click the link for the bubbles molds you use and when I ordered them they came, but the look sooooo small. Did you look small?
They are small hun i think 2.5 by 2.5 inches. I was surprised about that as well as they seem large in pictures all over the internet
Amazing 🤩 💗
Thank you
Awesome video
Glad you enjoyed it
can i use soy wax with these moulds? x
Definitely but it has to be tart or votive soy wax it cant be container or jar wax
Hi
Who can a make a candle without bubbles?
what do you mean?
First of all, I’m a beginner in making candles whenever i pour the wax in the mold and let it dry, i end up with the candle full of air bubbles and I don’t know how to prevent that from happening
??
👏👏👏👏
❤❤❤❤❤
❤️
Hi, thank you for sharing this
I want to ask you a permission for using this video on my page. My page is for handmade Supplies and we are selling candle making matirials, and many people asking for such A video to help them start, so im asking you for that and we will but your channel link in the same Post 🤩
I hope will agree
Thank you
Hi yes go ahead
@@JusNik thanx alot
Which wax you used?
problend 650 from the flaming candle