How to Replace Rear Brake Pads Rotors 05-10 Chevy Silverado 2500 HD Diesel
HTML-код
- Опубликовано: 6 окт 2024
- Buy Now!
New Brake Rotor Set from 1AAuto.com 1aau.to/ib/1ABF...
1A Auto shows you how to repair, install, fix, change or replace your own worn, squeaky, fading old brakes. This video is applicable to the 05, 06, 07, 08, 09, 10 Chevy Silverado.
This process should be similar on the following vehicles:
2001 Chevrolet Silverado 2500 HD
2002 Chevrolet Silverado 2500 HD
2003 Chevrolet Silverado 2500 HD
2004 Chevrolet Silverado 2500 HD
2005 Chevrolet Silverado 2500 HD
2006 Chevrolet Silverado 2500 HD
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/ozh/1AX...
• Complete Metric Socket Set 1aau.to/ok6/1AX...
• Complete SAE Socket Set 1aau.to/or/1AXA...
• 1/2 Inch Breaker Bar 1aau.to/ocj/1AX...
• Torque Wrench 1aau.to/op9/1AX...
• Anti-Seize Grease
• Brake Parts Cleaner
• Bungee Cord
• Paper Towels 1aau.to/oea/1AX...
• Rust Penetrant
• Floor Jack 1aau.to/oh7/1AX...
• Hammer 1aau.to/oha/1AX...
• Jack Stands 1aau.to/ohq/1AX...
• Large C-Clamp
• Rubber Mallet 1aau.to/oay/1AX...
• Wire Brush 1aau.to/ocz/1AX...
Subscribe: / @1aauto
Check out our playlist:
Chevy Auto Repair Videos: • Chevy Auto Repair Videos
Chevy Silverado 2000-2006: • Chevy Silverado 2000-2006
For More Info visit us at 1aau.to/h/M5/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
First video that didn't skip over important stuff. Very clear. I believe the lug bolts are torqued at 140 ft lbs.
I know this is an old video and idk if anyone will see this but this was a HUGE help for me. I was was so confused on how to get the rotor off of the truck I’m working on. It was the parking brake setup the whole time! Thank you!
+@sketchydentist6336 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Good video I like that you used normal people tools great DIY guide.
Tackling my first brake job this weekend and now I feel more confident. Great video!!
+DieselAndDeadlifts Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com
I've never seen anyone replace pads like this before. It looks like a real pita. Why not just pull the caliper pad housing off and do it the easy way?
Thanks man!! I couldn't get the slide pins out. This was the trick.
Great video. Answered all my questions and the job went smoothly.
Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com +John Sandborgh
This saved me a lot of time and frustration. You videos are awesome!!!
+Phil Germond Thanks so much for the feedback!
I really appreciate yalls videos!
What a great instructor
Thank you
1A auto love your videos,
Thankyou for sharing them
T55 torx
Outstanding video!
Good video but that axle seal oil leak looked pretty bad !
Shoulda taken care of the axel seal while you in der 😜
You didn’t adjust your parking brake after you put the rear drum back on
Axle seal is leaking why wouldn't you just replace it your right there unreal I don't get it do the job right the first time.
I'm not a pro but I thought I push down on the bracket bolts? I know on the front driver side you push down and on the front passenger side you pull up lossen the bolts, is it the same for the rear? Like I said I'm not a mechanic but want to do my rear brakes/rotors on my 2017 chevy silverado.
Thanks for the tips
Is this application the same/similar to 2500 6.0 gasoline?
Love y'all video!!
+Rigo Gallegos Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c
Hit the tires on the inside with the mallet, they pop off instantly.
You don’t live in the rest belt do you. I’ve had to heat and a 10lbs sled hammer in the past.
How relevant is this video for someone needing to change the rear pads and rotors on a 2012 Chevy Express 2500 8 lug 9.5 rear end (14 bolts on diff cover)???
Thanks
A Chevy truck is a Chevy truck. If it's disk brake, it'll be close to this, if it's drum brake, find another video (yours is disk). Chevy uses the montra, "If it ain't broke, don't fix it... Unless the government makes me change it."
POOR JOB: You did not bother to repair the axel seal leak even though replaced the brake pads and rotor put everything together even torqued everything but never adjusted the parking brake. Not much thought about SAFETY!
Maybe because no one is here for the axel seal leak other wise we would’ve looked up axel seal leak right?
You're lucky if the parking brake isnt completely siezed on these trucks anyway. But true, you're going to want it to work well when your brake lines blow.
Reposition E brake?
great video, but my owners manual says torque lug nuts to 140 ft-lbs and video says 120 ft-lbs. i dont know if it matters whatsoever but check your manual.
We do recommend to go by your manual. Thank you for watching our video! +sgtwildbill
Never in my life have I heard somebody call that brake parts cleaner
Is there a video for the front brakes?
+Eric Braunberger Yes, here's the how-to video you're looking for: ruclips.net/video/2nMF4yW6_7E/видео.html
Those brakes didn’t really need to be done
show us what is done when a bolt breaks off
William Volkmann like a lug nut bolt or a caliper mounting bolt? I broke off a caliper bolt once and I went and bought a whole new caliper. Your only other option would be to drill the bolt out and re tap it, just put a thicker bolt in.
caliper will not come off the bracket...Any suggestions?
I just spent 3 hours out side with the caliper between 2 jack stands and beating on it with a mini sledgehammer to get apart, when you put it back together clean and never seize the pins
Dat rubber that looked weird looked like my morning wood till i pull it out
Is there a value gasket video for a 1998 Camry?
+onenite2nite We currently do not have an auto repair video that covers this particular repair. We will keep this request in mind in the event that we need to make this repair in the future. 1aauto.com
1A Auto Parts okay no problem. Just asking love your videos and parts.
Brake parts cleaner is killing me
+Cody Kelsoe Thanks for the feedback!
What do you call it?
@@adamkorekach9936 I'm confused why people keep commenting this.. What else would you call it? Brake cleaner lol
3:50 STARTS
I wonder how many people have blown seals on the caliper because you didn't tell anyone to open the bleeder screw before depressing the caliper
Or just take the cap off of the brake fluid resivore.
@@larrygro about to do this tomorrow hope that helps it.
Never done that on any brake jobs and never blown a seal
you say the gear oil leaking from the axle seal is not to to bad ??? so we are just going to let it go ??? WOW REALLY ??? those pads still have a lot of life in them. yes they are worn but still good to go another 5000 miles i think... with all the gear oil on the parking brake shoes they just won't hold the truck well. oil on brake shoes is a large safety issue you think ??? another thing you never never back feed brake fluid into a ABS system ever... it will plug up the tiny orifices in the ABS system this is the first thing you learn in Brake School hello... where did all the brake fluid go ???
Those torx bolts holding the bracket to the caliper are never coming out haha. Dumb design.