MK6 GTI 400whp Boss 500 turbo, 91oct with Water/Meth
HTML-код
- Опубликовано: 22 апр 2024
- The CTS Turbo Boss 500 MK6 GTI TSI is back for upgrades. This time we upgraded the connecting rods, LPFP, IE Intake Manifold, and we also did a complete direct port water meth injection kit. We're doing custom tune with Malone / Tunezilla software and are pushing this turbo as far as we can on pump gas. Can we reach the goals, I think so.
Support the channel on Patreon - / comotorsports
Support the channel with CO Merch
CO Motorsports Holographic Sticker 2 Pack - comotorsports.ca/co-motorspor...
CO Motorsports Pullover Hoodie - comotorsports.ca/co-motorspor...
CO Motorsports Zip-Up Hoodie - comotorsports.ca/co-motorspor...
CO Motorsports Shirt - comotorsports.ca/co-motorspor...
CO Motorsports Snap Back Hat - comotorsports.ca/co-motorspor...
CO Motorsports Beanie - comotorsports.ca/co-motorspor...
Tools we use.
Orange Nitrile Gloves
amzn.to/3wFWK2w
Bolt Extractor Set, Easy-Out Screw Extraction
amzn.to/3HvKtE4
Inspection Camera 7” 1080p
amzn.to/3R8PSnL
3M Safety Glasses
amzn.to/3Y1vQ0R
Grinding discs
amzn.to/3H6HzUU
Lincoln Welding Gloves
amzn.to/404S8jQ
TITAN 16138 9-Piece Low Profile Impact Triple Square Bit Socket Set
amzn.to/3XVRIuj
Digital Timing Light
amzn.to/3JkxJBL
Swivel Magnetic Spark Plug Socket
amzn.to/3JbZ4FV
GEARWRENCH 20 Pc. Screwdriver Set
amzn.to/3WDXlMR
Camera Gear
Sony Alpha ZV-E10
amzn.to/3DbAi52
Rode Compact On-Camera Microphone
amzn.to/3kCVudP
67'' Phone Tripod Stand & Selfie
amzn.to/3kxLSks
Audio Video Capture Cards Cam Link Card HDMI
amzn.to/3XOnJoe
Dummy Battery DC Coupler Kit for Sony Alpha A5000 A5100 A6000 A6100 A6300 A6400 A6500
amzn.to/400wyNE
20FT USB-C to USB-C Cable
amzn.to/3inpU2U
25ft HDMI to Micro HDMI
amzn.to/3wvcMwk
Camera Tripod, Mini Flexible Tripod Stand
amzn.to/3H6orXi
Milling
Carbide End Mill 2 Flute Square End Standard 1/4" Diameter x 3/4"
amzn.to/3WDJsy0
Accusize Industrial Tools 1/8'' Thickness 10 Pairs Precision Parallel Sets
amzn.to/3WBUrYL
Precision 123 Blocks, Two Pack
amzn.to/3XEQuUB
Deep Black Apron
amzn.to/3j8Ochx
Accusize Industrial Tools 2-1/2'' Cutting Diameter R8 Shank Indexable End Mill
amzn.to/3XT2KAE
Lathe Turning Tools, Boring Bar Turning Tool Holder with 10pcs CCMT09T304 Inserts
amzn.to/3kCPfql
Tap Magic Cutting Fluid
amzn.to/3HtG6cC
Carbide roughing End Mills, HRC45 Tialn Coated
amzn.to/3Del3Z4
Hold Down Clamp Clamping Set Kit Mill
amzn.to/3XV3vch
Finally by Loxbeats / loxbeats
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download: bit.ly/FinallyLoxbeats
Music promoted by Audio Library • Finally - Loxbeats (No...
Finally by Loxbeats / loxbeats
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download: bit.ly/FinallyLoxbeats
Music promoted by Audio Library • Finally - Loxbeats (No... 
Авто/Мото
Mission accomplished on this one.
A 130whp at the end of the curve, damn this owner gonna be smiling
Serious numbers. And a really nice wide power band. Impressiveness
I wish you guys were nearby! thanks for the build
Ship the car I'm sure they will tune it and go there to visit nice area
@@carlosoruna7174 I wish i had it like that brother, but alas got to take it as it comes..I would if i could
🔥🔥🔥🔥🔥🔥🔥
It’s appreciated that you don’t swear in the videos
Winnebago Man is now my go to for sales training LOL.
Proper
no wayy i just watching back the old vid of the boss 500 and now we have new one with meth
Yes way. :)
Cool video!!! He must be wanting to go another 100 hp later yeah? The CTS k04x hybrid will get to 400 with the right supporting mods with less lag which makes it more streetable imo. The only thing you need to worry about is the torque curve early on that the K04x is known for but with rods you’re good. Alex from Stratified works magic and really understands the tuning process.
From my experience with the X it's not doing this on this fuel combo.
@@COMotorsportsless power ?
Very nice! Personally, I'd rather have a 350 hp 07K for that sweet, sweet sound. Way more work though.
Same car i drive 😮
what sealant do you guys use for the valve cover?
Do you know the wheel specs for the fronts you featured at the end of the video?
Would I need to do all that upgrade on my mk6 R to make at least 420whp
As someone who just ordered a water/meth kit for my car, this is exciting to see. I knew the Volkswagen man video seemed super familiar and couldn't put my finger on it but the Winnebago man video is a classic! What size nozzles are in on this setup?
Noodle selection is all based on the setup, power goals, fuel being used etc. Not the same for everyone. This has 5 nozzles.
Awesome content! One of the couple RUclips channels I like watching. Quick question, what’s the most torque and horsepower can a MK7R with OEM sized turbo and 93oct pump gas? Thanks
Stock turbo, 93oct.. that info is out there readily available from pretty much every tuning company. Just do a little digging through any of the major tuning companies and you will see what's capable.
@@COMotorsports So if a person wants a little more power than a APR stage 2+ tune but doesn’t want more turbo lag, is there nothing else that can be done? Also, is flex-fuel available for the MK7R?
Are you guys using the AEM V3 WMI controller and what size nozzles for the direct port? Looks like a solid build, love seeing the gen1/2 TSI content 😊
Yes AEM V3 on this one, with a bunch of extras for the direct port stuff.
This is what I wanna do this is next step from ko4 93 ?
im building right now a 2.0 TFSI CRZA from Golf R mk6. So car is full bolt on. Engine will be standard build IE rod JE piston 83mm OEM compression with IE intake manifold and overall with a full head rebuild on supertech sprigetc. Now im not sure about the turbocharger.About CTS Boss 500-600 it seem some units have problem and it fail. So for a bolt on solution what you guys suggest. Target is 500 HP crank. No meth for now. Feel free to do suggestions for other parts of the build. JE or Mahle piston for exemple. Tks everyone.
I have a boss 600 on my mk5 gti and it’s been reliable. Spools quick too, full boost at like 3800
I would love to know the details on the water/meth setup like nozzle sizes, and info like what rpm injection starts as well as how power was unlocked by having it?
I know you did previous dyno pulls, but it had stock previously, correct?
All specific to the setup, initial fuel used, mixture, and power goals so not the same for everyone. Better fuel enables more timing and more boost. A lot of this power was from timing.
Hello CO Motorsport, I would like to know with the BOOS500 is it a Garrett core?
Nope
Is it hard to get e85 where your customers lives ? Here in Sweden almost 9/10 boosted cars change to e85
It is hard yes, we have to bring it in by the barrel, there is no pump E85 here unfortunately.
When are we getting more content on the 07k? Is a turbo kit coming?
Honest answer, when I have time. :)
What injectors do you guys have the most luck with on the 2.0 Tfsi engines in the mk6 golf R when going forged motor and gtx3076r? Rs3 injectors seem to be the go to but not sure if there are better options?🤷🏻♂️ Ta
All depends on power goals, fuel being used, WM or not, lots to consider. If you have plans to max out that turbo you want to go all in on your fueling upgrades up front or you will be spending money redoing it when you want more.
@@COMotorsports yea It is full bolt on running pump gas and WM, big intercooler, fuel pump upgrades, forged engine with upgraded valve springs, all ARP hardware, fluidampr pulley etc. Still stock camshaft and dct clutch’s tho. Dunno if that will hold me back but haven’t chosen injectors yet but was aiming for 500 plus hp and will definitely keep pushing it after that. Not sure if RS3 injectors will keep up?
The WMI that you guys did with the direct port, how reliable is it with the direct port?
As reliable as the parts you use, and how it's installed I guess.
what was the total timing 91 vs water meth? just curious how much of a difference it makes
It makes a lot of difference. You can see it's only making just over 24psi. Most of this power was made with timing.
weed need 07k content!
You're telling me. I have a wicked 07k build scheduled for my daily. Built engine, g900, standalone and lots of fun bits...all is waiting just no time to get to it unfortunately.
Noticed you didn't remove the crank, so you reused the main bearings?
Of course. No need to remove crank on a rod install.
thoughts on cts? i’ve herd a lot of mixed reviews when something goes bad they dont care a bit wondering if y’all had any issues + i herd they switched brand manufacturers during covid and haven’t switched back thx random guy on internet
Hello, dear friend, I recently purchased a CTS BOOS 600 turbo from ECS, the turbo was run for a few days and of course all the assemblies to see that everything is in order before going to the dyno so far everything was fine I went to the dyno to tune the car right from the start we felt that the turbo was not behaving well, not holding a boost and not behaving like a turbo Garrett's after a few hours the turbo started to grind I took the turbo apart and voila I noticed there were no signs of the Garrett company of course I contacted ECS who disclaimed responsibility and told me to contact CTS and I contacted CTS and told them the story and suddenly they tell me that they have never recorded or published such a thing that the core of the turbo of Garrett, sorry, they wrote that the compressor should have 11 blades, and I received 8 in short, I do not recommend getting close to their turbo, as of now, I don't understand why they didn't give me a Garrett turbo core, these are Chinese cores, as it seems, I have never had a Garrett turbo, these are fake turbos like they sent me
Originally these Boss kits were Garrett Cores, according to CTS's website. However that was years and years ago. So anything within the past few years at least would not be a true Garrett core. CTS's website does not advertise them as being Garrett cores and haven't for a long time.
@@COMotorsports It's a shame that they advertise on ECS that the core is a Garrett turbo. I will send the turbo to CTS and ask for a refund
@@DUDUSL2 Sounds like an ECS problem, not a CTS issue IMO.
400 wheel and basically 400 wheel torque is going to be a RIOT in that sucker!
Random question, have you guys played around much with the early "timing belt 4.2s" ?? Being as it's Audi stuff, I thought maybe the answer would be yes...
Not really, no turbo... no fun. lol
@@COMotorsports I hear that, but I know you guys know how to add turbo(s)! ;)
Just wondering, my old Saab 2,0 liter with some small upgrades gettin 300 hp and 420 NM torque on Ethanol offcourse. Why the low torque numbers? Is it the fuel only?
Timing, boost, fuel, and tuning all control your torque curve. 420nm is pretty good all things considered. Your hitting 300hp and 300lbs/ft tq with a 2 litre. Very healthy number
Wait...do you mean the numbers they hit in the video? Theyre probably trying to keep torque low for safety. That's my guess if thats what youre asking
Low torque lol, you realize this is measured at the wheels. So this would be around 615NM at the crank to compare to your numbers. ;)
Also NM and lb/ft are two completely different units for measuring torque.
@@78katz they're translatable, doesn't matter which you use in this case
About how much can be made on 91oct with boss 500 no wmi? With 5th injector from stratified.
91oct is one of the biggest parts of the problem.
@COMotorsports I live in az so 91 is all we have. We have some e85 stations but not close to me.
How much would it have made on 93? Or maybe e85?
Less. Fuel system won't support e85 at this power level. 93 Oct on its own isn't enough compared to the amount of water meth is using.
Can you post more about the torque also on each build...in ftlb or Nm..Great vids tho.
What do you mean more? We displayed the torque very clear in the video.
@@COMotorsports just binged on a lot of your vids commented on wrong vid..great vid and results.
Do you have to do the upgrades you did to reach 400 whp?
Not sure what you're referring to specifically, but it just hits 400whp on this setup. Taking any of those mods away will make less power.
I am now disappointed to find out that you don't really treat Clayton like the previous video... 🤬
Where’s you guys shop located. I need help with my 1.8t swap
East Coast Canada
@@COMotorsportsany chance you know who Jeremy Mackenzie/Diagolon is? \\\
@@contractor556 me and names... No good. 🙂
TR DCBB IHX675
Tell me about this Turbo.
Never even heard of it.
The wheels are Vision 571 Sport Star ll 15inch
Nope
What are the specs
I wonder how can they put 15inch wheels on mk6 ?
need world wide shipping option for merch 😫
Email us, we do it. We just don't offer it through the site.