I’m going to cut my ball ends off and not screw any other screws In to stop it, I’ll be using my dumbo rc ddf350 I’ll just set the end point up to just before it locks the servo 👍🏻
I want to know if the internal parts of the miata are the same as the r34, should I buy the r34 or the miata? Or is there another model that is better than these 2? Please answer me sir
Have received my miata (1804) Last week from banggood, it is different to the rx7 (1802), new remote , better gyro, real springs. Not much to mod, drifts nice. Will try his mod soon.
btw i dont think you really need to add some screw to stop it. my miata if its in the air the servo gets locked up too but on ground it never occurred(ig the weight makes the difference)
I use the 80 degree mod and put a small screw in like this tutorial on both sides and it works. Just make sure the screw stops it right before it binds and hits the wheel for max angle
Hello, i bought about 4 months ago the LDRC Nissan GT-R R34, it was perfect, i was enjoying every minute, but I don't really have a good and open place wherr to drift. I have a table and some table chairs, they have "legs" and being a beginner and drifting for the first time it happened to hit the "legs" of the table and the chairs with the car and a day the engine of the car stopped working correctly, it was like working in neutral, it wasn't moving the wheels, now my question is if you could please give me your discord so i can send you the video of the sound and the problem and maybe you will undeestand where is the problem and tell me what should i do... Please don't ignore me, btw i am subscribed so please don't ignore me... This was my message, btw i am happy that you answered ❤️🩹....
@@Laur4ik oh I don’t have discord. But it sounds like one of the driveshafts in the rear of the car broke. That’s why you can hear the motor but the wheels are not spinning.
@@Laur4ik if it is the driveshaft you’d have to purchase a new one. Hard to know for sure. I’d recommend taking it apart and trying to figure out why the wheel isn’t spinning, that’s half the fun of RC is being able to diagnose and fix!
Thank you for making the videos, they're the best about LDRC cars and are very well filmed & edited :)
I’m going to cut my ball ends off and not screw any other screws In to stop it, I’ll be using my dumbo rc ddf350 I’ll just set the end point up to just before it locks the servo 👍🏻
Thanks! W Tutorial btw
Great, thanks 👍🏻
do you think the ACXWA steering mod will work on the miata?
Runte Well
I want to know if the internal parts of the miata are the same as the r34, should I buy the r34 or the miata? Or is there another model that is better than these 2? Please answer me sir
r34 has more weight but I chose Miata cus it's cute
Have received my miata (1804) Last week from banggood, it is different to the rx7 (1802), new remote , better gyro, real springs. Not much to mod, drifts nice. Will try his mod soon.
@@marcbabulenko8336 👍
@@marcbabulenko8336🙏💙
just recent bought this, if my friend has one will they drive with the same controller or are they in seperate channels
btw i dont think you really need to add some screw to stop it. my miata if its in the air the servo gets locked up too but on ground it never occurred(ig the weight makes the difference)
hi, can you check the gyroscope for wpl d12 (I don't really know what this gyroscope is called)
Dont use that gyro its horrible with a mini rc i tried it before its a waste of money (i also turn off the stock gyro when using the wpl d12 gyro)
Awesome mod. What size and type of screw are you using? I think I'm having the same issue with the 80 degree mod. When I turn right it binds.
I use the 80 degree mod and put a small screw in like this tutorial on both sides and it works. Just make sure the screw stops it right before it binds and hits the wheel for max angle
Gleichner Rapids
Royal Radial
Bennie Springs
Orlando Track
Tod Plaza
Lacey Court
Bro why u ignored me?? 😢
sorry, didnt mean to. Did you have a question?
Hello, i bought about 4 months ago the LDRC Nissan GT-R R34, it was perfect, i was enjoying every minute, but I don't really have a good and open place wherr to drift. I have a table and some table chairs, they have "legs" and being a beginner and drifting for the first time it happened to hit the "legs" of the table and the chairs with the car and a day the engine of the car stopped working correctly, it was like working in neutral, it wasn't moving the wheels, now my question is if you could please give me your discord so i can send you the video of the sound and the problem and maybe you will undeestand where is the problem and tell me what should i do...
Please don't ignore me, btw i am subscribed so please don't ignore me...
This was my message, btw i am happy that you answered ❤️🩹....
@@Laur4ik oh I don’t have discord. But it sounds like one of the driveshafts in the rear of the car broke. That’s why you can hear the motor but the wheels are not spinning.
@@APEXRCGARAGE is this critical, how can it be repaired?
@@Laur4ik if it is the driveshaft you’d have to purchase a new one. Hard to know for sure. I’d recommend taking it apart and trying to figure out why the wheel isn’t spinning, that’s half the fun of RC is being able to diagnose and fix!
Wisozk Drive