I know this is is an older video but thank you for it you actually answered all the questions I had about the trolling motor. I'm brand new to the kayak concept I'm purchasing my first one in either Sept or Nov So pre building it out on paper and purchasing the easy (and cheaper) stuff while I wait.
I like the idea of having a bow mount trolling motor, but what happens when you hit a stump or other structure. No give and that would suck. You make great videos by the way.
thanks for a great video, I just got this for my Kayak, can you please provide the details of the bracket you use to pull the XI3 up with or if you have come up with a even better solution now , as this is 2 years old, can you provide that info.... thank you! Charlie
Got the xi3 kayak version from bass pro on sale. $150 off. Now to scrape up cash for the 12v 100ah Dakota. The xi3 was a lot lighter than I thought it would be.
Shaft clamp is available at Yakgadgets. I just bought one and installed on a Motorguide xi3, but had to enlarge the shaft hole a little with a spindle sander. It’s some kind of composite so no biggie.
Having trouble putting 10g wire into the Marinco plug. PKG reads 8 to ten gauge. Trolling motor wire ten gauge went into male end of plug without a hitch.
Thanks TJ this is the video I have been waiting for. I said something to you at least 6 months ago. I have seen plenty of videos on how to install the motor guide, but I knew you would do a clean install. You delivered.
OK I’ve seen about six or seven people ask about that V-shaped bracket you have on the shaft of the trolling motor but you haven’t answered yet you’ve answered other things. Why is that? I just purchased one Xi3 and I’d like to know about that V bracket. Thank you
As I mentioned in the video, I don’t know where I got that part. It was sent to me a few years ago and it has been in a drawer until now. If I knew , I’d tell you..
Where do you get the nylon rivet used to pull the foot petal with the 1/8 cord running through it .Thank you,trying to get something to work.I appreciate your help!
I read through the differences on motorguides website between the two models but they pretty much read the same. What are the main differences between the two motors. Probably a very basic question but this all new to me. Thank you
Now that you’ve had it for awhile how do you like it? Did it hold up in ruff conditions? Do you like it better than your min kota or other brands you’ve tried?
I have the exact same setup. Also ordered a Guardian Angel red and green LED light. What do you think about putting the magnetic mount on the top of the trolling motor to mount that Guardian Angel light. I can’t think of anywhere else to mount that light with our current trolling motor setups.
Great video TJ... I am definitely jealous, I would love to get one of those 12 V 100 amp hour batteries... maybe one day but the kayak is turning out awesome. Thanks again
Watching all your videos, and the one thing that has caught my eye is the Altec Speaker on the Ram mount, how is it that you actually have mounted that. Looking to do the same, just looking for a mounting solution that is tried and true.
Before I order the boonedox is there any issues with the kayak being too heavy for it with the trolling motor, batteries and everything else fully loaded down. I’ll have a similar setup and am a little worried with the 180lb boonedox max weight capacity. Thank you
Hi TJ. The deploy is not automatic for that motor? My understanding was, the deploying it can be controlled from the remote control. Thank you for your answear.
T.J,.Great vids bro.All The info, gear, diy's, taking your time, so use who are new to gear installs can follow. This is my 2nd season, on my new Oldtown 120 pdl, and finally off the bank. Especially on that one man vessel, we make our own. I Will be testing my new J2 Bixpy this weekend, and my new Garmin F.F. install. Be safe bro. 🙏 🎣 😎
@@KayakUSA1 Thanks TJ! I stumbled across your review of the Bixpy and it looks exactly like what in after. Pretty slick! Also, would you get a second battery to place under the seat for other electronics like a finder and phone charging, etc? Or is the Bixpy powerful enough for everything?
Hey I noticed your gps light on the xi3 didn’t turn on right away. I’ve had the same issue. Did you get this resolved and if so how did you? Did it end up just turning on my itself?
You’ve got a sweet setup. I got a fishing kayak and need to streamline things a bit with my trolling motor setup (on the stern). Are there any type of quick connects for batteries if I don’t want to drill holes in the kayak so I can disconnect my battery quickly from the trolling motor? I still have a smaller Duracell 35amp agm battery I use for it but hate having to unscrew the terminals every time to bring the battery in to charge it.
TJ thanks for putting out this video. I’m in the process of getting this install on my Hobie I did have one question where can I get the holder that you made for the controller for the xi13 remote? Do you sell those it looks like you custom made it. Thanks Randy
@@KayakUSA1 ok cool. Cause my old town with spot lock will spin 360 sometimes while spot locking and the main twist cable will just wrap around and around. I’m putting a motor guide on my bonafide and was curious thanks.
Hi TJ, got a question here, the motor support, will come with the trolling motor or has to be purchased sepparatley? Thank you very much for your answear.
Any reason why the XI3 would not work if mounted on the rear of the kayak? Just for getting from point A to B for example without the spot lock Gps on it.
Hey brother quick question - the motor is stamped as needing 6ga wire but I see you didn’t opt for that and you mentioned it’s because it’s the 12v model. So is mine. How has it performed with the lighter wire? I love that power connector you used but they don’t have a 6ga version.
Does the Garmin work hand in hand with the Motorguide? I just installed Lowrance hds active target system along with the NMEA coms so I can pick a waypoint on my maps and the trolling motor will take me to that spot. it wouldn't do that with my Humminbird i'm also running. I wish Motorguide had a screen on the remote like MK do. I've almost dumped myself because I didn't know what was turned on or the speed. Only complaint.
Where did you get the steering bracket that you are using to lift and deploy the trolling motor? The one that's a V shape that you have clamped onto the shaft under the head unit. I'm adding a trolling motor to the bank of my kayak and I've searched everywhere for a proper steering bracket but haven't found anything. My next option is to draw one up and 3D print it.
I have a tri hull kayak (feel free lure) I repair scratches every year we have lava rock where I live in Idaho. I don't have a rigger or drop fin, I wax my kayak and it has helped with tracking a lot . What I'm interested in, have you or any viewers waxed there yak and then drilled holes for ( yak attack through hull plugs ) I'm going to silicone them for extra safe measure, has anyone ever had the silicone release on a waxed yak? that being said does anyone have a preference in marine silicone ...... won't lie I'm a little nervous this is the first holes I am drilling in my yak.
🤘🏻😎🤘🏻 I have a PA-14 and the OneObjective mount mounted ready for the XI3. Love the battery box and seeing it fits the Dakota 12v 100ah battery. I waiting on availability of the xi3 🤦🏼♂️😂 where did you get the Ketch board and mount? Thanks and keep those vids coming 🤘🏻
I have been thinking about adding one to my PA14. My concern is we have so many trees and large brush in my area, I feel like I would just hit it and get thrown out of the yak, probably tear the thing up as well. Thoughts?
I don't intend to say 10AWG is insufficient for your build... it's probably fine. But it sounds like you're thinking higher voltages need thicker wires. Typically, the reverse is true. A motor drawing similar power at higher voltage will do so at fewer amps. The amps determine whether your wires will overheat, so higher voltage = lower amperage = thinner wires.
Your going to find out like me, it's great to have the motor guide but having to use the remote to turn on an off and steer isn't as handy as on bass boat. It's easier to have spot lock on a spot. But to fish and use trolling motor to say go down a bank while fishing is frustrating..
Question, everything I read says that Alabama law states if you put a gas or electric motor on your kayak it’s now a powered vessel and requires registration and the boaters safety class on your license (which I already have). If this is not true, can you provide a reference?
I’m just getting into kayak fishing and want to have a motor option. I’m weighing an already rigged option like old town autopilot vs DIY with bonafide like @flukemaster. Would you recommend one over another or pros and cons of both options
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Awesome Video, Greatings from Germany ,Dome
Thank you very much!
I know this is is an older video but thank you for it you actually answered all the questions I had about the trolling motor. I'm brand new to the kayak concept I'm purchasing my first one in either Sept or Nov So pre building it out on paper and purchasing the easy (and cheaper) stuff while I wait.
Glad I could help! Thanks for watching 👊🏼
Amazing! Love it! Perfect angler kayak!
I love this setup. Where can I get a setup up just like this.
Do you have a link for the marine smart box ?
I would love to mount a terrova with the shaft cut down
I like the idea of having a bow mount trolling motor, but what happens when you hit a stump or other structure. No give and that would suck. You make great videos by the way.
At 9:26 what did you use for the line to go through?
thanks for a great video, I just got this for my Kayak, can you please provide the details of the bracket you use to pull the XI3 up with or if you have come up with a even better solution now , as this is 2 years old, can you provide that info.... thank you! Charlie
This baby is like a mini fishing naval vessel! You could build in a mini drone bay to recon for fish! Looking forward to seeing it in action!
The more I look at the Xi3 the more I'm digging it vs other kayak motor options for my PA14
can you share the link to Gene's video that shows the Stow and Go install?
Where did you get the grommets for the cord going to the pedal
I think I just used a stuff plastic tube that I cut down and flared the end.
Wow! Bro! Great video! Can’t wait till you do the on the water test. 😁🤙🏽
woodsy can you make or have a video how to install the bungee change on the front hatch of pro 14
Do you have a link of any sort on that v mount for your pull up/slow release cord?
Got the xi3 kayak version from bass pro on sale. $150 off. Now to scrape up cash for the 12v 100ah Dakota. The xi3 was a lot lighter than I thought it would be.
Killing me TJ! Killing me!
What is the link to get the mounting plate?
My guy just had a Bixby now a full on trolling motor.#goals
The bracket you have on xi3 to pull up motor and release it, where do you buy that
Do you have any issues installing the Xi3 & the mount on top of the marine mat? wondering if i should remove my marine mat before installing my mount.
Could you post a link to how you did the cable install for the seat cable please?
What’s the name of that bracket for the trolling motor to pull it up. And where did you get it?
Great video lots of info.
Thank you
Good stuff....thanks !
Shaft clamp is available at Yakgadgets. I just bought one and installed on a Motorguide xi3, but had to enlarge the shaft hole a little with a spindle sander. It’s some kind of composite so no biggie.
Made for a 1 1/8” shaft. Motorguide and Minnkota shafts are 1 1/4”
Steering control arm - foot
TJ where did you get the nylon rivet that you have under the trolling motor foot pedal that the rope runs through??
That’s just a piece of plastic tubing
@@KayakUSA1 oh got it buddy!! Thank you I got it figured out. Keep up the awesome videos!
Also thanks for sharing about the battery, do the make one for a larger boat motor!
Having trouble putting 10g wire into the Marinco plug. PKG reads 8 to ten gauge. Trolling motor wire ten gauge went into male end of plug without a hitch.
Can this be set up with a lowrance elite fs
Yes 🤙🏼
Would you happen to be doing a video on that ?
Thanks TJ this is the video I have been waiting for. I said something to you at least 6 months ago. I have seen plenty of videos on how to install the motor guide, but I knew you would do a clean install. You delivered.
What is that steering bracket you attached to the shaft of the Xi3?
Excellent vid. Thanks for the great info and advice. I have a PA14 also and this looks awesome!
Which Trailer do you use?
Where did you untie for the kickstand/seat and what string did you use for the trolling motor pedal release some power pro braid or? Thanks
Please where did you purchase the rod tube you used for wrapping the cables in?
Amazon, I have links to it on my kit page www.kit.co/kayakusa it’s the same stuff I made my rod socks with.
@@KayakUSA1 Thank you. I found it but not sure which diameter you got. Was it 3/4”?
OK I’ve seen about six or seven people ask about that V-shaped bracket you have on the shaft of the trolling motor but you haven’t answered yet you’ve answered other things.
Why is that?
I just purchased one Xi3 and I’d like to know about that V bracket.
Thank you
As I mentioned in the video, I don’t know where I got that part. It was sent to me a few years ago and it has been in a drawer until now. If I knew , I’d tell you..
Does the xi3 kayak have nema 2000 capacity so u can hook it up to a Lowrance hds?
Yes
Any idea if they do/will do a transom version?
I haven’t heard of one yet. 🤙🏼
The 36” only has the freshwater version. Shouldn’t they have done same with saltwater?
I don’t understand y that’s not obvious.
They’ve released the saltwater version recently, available 1st from select kayak OEMs like NuCanoe, before release to the general retail market.
@@michaelcrocker7813 Yes I just bought one.
How did you install the foot pedal rope . How does the rope run in the hual of the boat . What parts did you use for this part of the install
Where do you get the nylon rivet used to pull the foot petal with the 1/8 cord running through it .Thank you,trying to get something to work.I appreciate your help!
I read through the differences on motorguides website between the two models but they pretty much read the same. What are the main differences between the two motors. Probably a very basic question but this all new to me. Thank you
The kayak edition has a 36” shaft 👍🏼
Now that you’ve had it for awhile how do you like it? Did it hold up in ruff conditions? Do you like it better than your min kota or other brands you’ve tried?
best bow mount motor you can get for your kayak.
What did you use to Mount your anker speaker I have the same one and have been wanting to find something to Mount it to my trac
Thanks man, all I did was screwed a Ram ball into the back mounting hole then you can use it anywhere 🤙🏼
I have the exact same setup. Also ordered a Guardian Angel red and green LED light. What do you think about putting the magnetic mount on the top of the trolling motor to mount that Guardian Angel light. I can’t think of anywhere else to mount that light with our current trolling motor setups.
Nice job.
Now that was a good video. I wonder if they have a saltwater edition and i thought they had a self deploy model as well but maybe those are heavier..
Does those pads comes with kayak.? They looks good.
Is the 54 a big enough battery, didn’t want to spend 800 on batrery
Where can we get the V bracket you use to pull the motor back to the cradle?
Great video TJ... I am definitely jealous, I would love to get one of those 12 V 100 amp hour batteries... maybe one day but the kayak is turning out awesome. Thanks again
Thanks man! 🤙🏼
What’s your opinion on putting a trolling motor that has automatic stow/deploy feature?
I would love to do that soon! I think it would be great .
@@KayakUSA1 🤙🏼🤙🏼
@@KayakUSA1 is there a certain size you recommend? I’m gonna be using in salt & fresh water
TJ does the quick disconnect for trolling motor come with mounting bracket from one objective or with the trolling motor
They are all three sold separately, motor, mount plate and the quick disconnect.
Watching all your videos, and the one thing that has caught my eye is the Altec Speaker on the Ram mount, how is it that you actually have mounted that. Looking to do the same, just looking for a mounting solution that is tried and true.
Thanks man, all I did was screwed a Ram ball into the back mounting hole then you can use it anywhere 🤙🏼
Where did you get the v bracket for the steering
Before I order the boonedox is there any issues with the kayak being too heavy for it with the trolling motor, batteries and everything else fully loaded down.
I’ll have a similar setup and am a little worried with the 180lb boonedox max weight capacity.
Thank you
I’d love to get one of those 100ah batteries but at $900 it’s a little bit expensive…
Hi TJ. The deploy is not automatic for that motor? My understanding was, the deploying it can be controlled from the remote control.
Thank you for your answear.
Not for the Xi3, Minn Kota does make one that self deploys tho.
@@KayakUSA1 oh i see, thank you very much for your answear.
What drove the decision to motorguide? Vs another brand
Nice video
T.J,.Great vids bro.All The info, gear, diy's, taking your time, so use who are new to gear installs can follow. This is my 2nd season, on my new Oldtown 120 pdl, and finally off the bank. Especially on that one man vessel, we make our own. I Will be testing my new J2 Bixpy this weekend, and my new Garmin F.F. install. Be safe bro. 🙏 🎣 😎
Thanks man!! Good luck out there 🤙🏼🎣
Might have missed it but did you install a breaker anywhere?
Hi TJ. What motor do you recommend for a Hobie Outback? I don’t believe this one will fit it. Thanks!
The Bixpy kit for the drive slot works great on the Outback 👍🏼
@@KayakUSA1 Thanks TJ! I stumbled across your review of the Bixpy and it looks exactly like what in after. Pretty slick! Also, would you get a second battery to place under the seat for other electronics like a finder and phone charging, etc? Or is the Bixpy powerful enough for everything?
Where did u get the shaft clamp?
Any luck on finding that clamp?
i found it awhile back.. im using a pull cord i bought from amazon with a clamp i had on hand that came with my old trolling motor
How do I get the bracket to pull the trolling motor in
Hey I noticed your gps light on the xi3 didn’t turn on right away. I’ve had the same issue. Did you get this resolved and if so how did you? Did it end up just turning on my itself?
It’s because I was in my garage. GPS needs to be outside for a good signal 👍🏼
You’ve got a sweet setup. I got a fishing kayak and need to streamline things a bit with my trolling motor setup (on the stern). Are there any type of quick connects for batteries if I don’t want to drill holes in the kayak so I can disconnect my battery quickly from the trolling motor? I still have a smaller Duracell 35amp agm battery I use for it but hate having to unscrew the terminals every time to bring the battery in to charge it.
There’s a few good ons on Amazon I use, look on my kit page, I have them linked there.
www.kit.co/kayakusa
Does this motor have spot lock?
Yes
Ty
Great video again, just wanted to know should you have a circuit breaker between the battery and the motor? Cheers Russell
It’s a good idea to have a breaker or fuse or even a cut off in between. 👍🏼
TJ thanks for putting out this video. I’m in the process of getting this install on my Hobie
I did have one question where can I get the holder that you made for the controller for the xi13 remote? Do you sell those it looks like you custom made it.
Thanks
Randy
Thanks for watching, I actually 3D printed my remote holder myself. It takes my little printer about two days to print one tho.. 😂
How does your Xi3 just slide out when you depress the deploy button? I have to give mine a firm bump.
I took the metal shaft out that locks it in place and I sanded it down and polished it . Now she’s slides in and out on her own.. 🤙🏼
@@KayakUSA1 you are a brave man!
Doesn’t the cable you use to lower and pull back up the motor get twisted around from when the motor is spinning on spot lock?
Not really, the motor only turn 180 and then backwards. They have cables too , so the can’t turn 360. 👍🏼
@@KayakUSA1 ok cool. Cause my old town with spot lock will spin 360 sometimes while spot locking and the main twist cable will just wrap around and around.
I’m putting a motor guide on my bonafide and was curious thanks.
Hi TJ, got a question here, the motor support, will come with the trolling motor or has to be purchased sepparatley?
Thank you very much for your answear.
Any reason why the XI3 would not work if mounted on the rear of the kayak? Just for getting from point A to B for example without the spot lock Gps on it.
Hey brother quick question - the motor is stamped as needing 6ga wire but I see you didn’t opt for that and you mentioned it’s because it’s the 12v model. So is mine. How has it performed with the lighter wire? I love that power connector you used but they don’t have a 6ga version.
where did you get the V bracket that helps you lift the motor from?
I'm trying to find the same thing for mine. Any feedback?
Does the Garmin work hand in hand with the Motorguide? I just installed Lowrance hds active target system along with the NMEA coms so I can pick a waypoint on my maps and the trolling motor will take me to that spot. it wouldn't do that with my Humminbird i'm also running. I wish Motorguide had a screen on the remote like MK do. I've almost dumped myself because I didn't know what was turned on or the speed. Only complaint.
Where did you get the steering bracket that you are using to lift and deploy the trolling motor? The one that's a V shape that you have clamped onto the shaft under the head unit. I'm adding a trolling motor to the bank of my kayak and I've searched everywhere for a proper steering bracket but haven't found anything. My next option is to draw one up and 3D print it.
You might want to change the prop to a dual blade. It doesn’t drain the battery as fast.
I have a tri hull kayak (feel free lure) I repair scratches every year we have lava rock where I live in Idaho. I don't have a rigger or drop fin, I wax my kayak and it has helped with tracking a lot . What I'm interested in, have you or any viewers waxed there yak and then drilled holes for ( yak attack through hull plugs ) I'm going to silicone them for extra safe measure, has anyone ever had the silicone release on a waxed yak? that being said does anyone have a preference in marine silicone ...... won't lie I'm a little nervous this is the first holes I am drilling in my yak.
First time watching and very detailed good video, what kind of kayak is that , what weight is it rated for and the length?
🤘🏻😎🤘🏻 I have a PA-14 and the OneObjective mount mounted ready for the XI3. Love the battery box and seeing it fits the Dakota 12v 100ah battery. I waiting on availability of the xi3 🤦🏼♂️😂 where did you get the Ketch board and mount? Thanks and keep those vids coming 🤘🏻
Dayummmm! What a kayak! If you were looking for a "spot lock" type bow mount, would you still get the Motor Guide or Minn Kota or Rhodan? Thanks!
I have been thinking about adding one to my PA14. My concern is we have so many trees and large brush in my area, I feel like I would just hit it and get thrown out of the yak, probably tear the thing up as well. Thoughts?
I don’t think it would be an issue. Run at low speed or pull the motor up and use pedals.
what'up~like. beautfiul channel~see you later. 🤗
I don't intend to say 10AWG is insufficient for your build... it's probably fine. But it sounds like you're thinking higher voltages need thicker wires.
Typically, the reverse is true. A motor drawing similar power at higher voltage will do so at fewer amps. The amps determine whether your wires will overheat, so higher voltage = lower amperage = thinner wires.
Your going to find out like me, it's great to have the motor guide but having to use the remote to turn on an off and steer isn't as handy as on bass boat. It's easier to have spot lock on a spot. But to fish and use trolling motor to say go down a bank while fishing is frustrating..
Whyis it frustrating?
😂
Question, everything I read says that Alabama law states if you put a gas or electric motor on your kayak it’s now a powered vessel and requires registration and the boaters safety class on your license (which I already have). If this is not true, can you provide a reference?
Yes sir, once you add a motor you need to register the kayak as a boat and add numbers to it. 👍🏼
@@KayakUSA1 thanks TJ. I’ve seen it mentioned on numerous websites but I just can’t seem to find it on the ALEA website.
You should just sell rigged out kayaks man.... One stop shop lol
😂 Facts!
My broke ass can’t afford none of this. Really cool setup. Someone teach me the ways of MONEY
There comes a point to where why not just run a boat? This yak has got to be over 12K with all the stuff and the trailer.
I have a boat 👍🏼
$700 for a battery ? Not a chance
I’m just getting into kayak fishing and want to have a motor option. I’m weighing an already rigged option like old town autopilot vs DIY with bonafide like @flukemaster. Would you recommend one over another or pros and cons of both options
Where did you get the bracket the your rope ties onto the XI3?