New Tractor Day is a GREAT Day! No machine is perfect, and I plan to share the good and the bad with this TYM 5520ch. To Follow Along Click Here! ===>>>>> www.youtube.com/@JoeTheFarmer?sub_confirmation=1
I just found your channel 😊 I am looking at buying a TYM 2515 R from Zemmermans in Newcastle Virginia. I have been looking at a couple of different tractor brands, and I think I've settled on the Tym. Anyway, thank you for talking about Jesus on your 15:07 videos. Keep that up...! Thank you for being real. I'm looking forward to more content. Be blessed.
Let's get on with the much work needed done ! Congratulations Joe ! It's time to see it goes ,works ! we're excited .as you goes Joe s !.Enjoys Good days
Awesome to hear! I love it so far. The cab is a bit tight for me, but the machine has been fantastic in the heat. More to come tomorrow on this machine. Appreciate you watching!
Thank you sir! It is a solid machine and a nice cab to get some work done. Tomorrow it will be holding the grapple and the brush mulcher. Don't plan on any moss growing on it! Take care and have a great evening.
Congratulations on your new TYM tractor , I also purchased a TYM 4820ch. it's a great tractor. Please check all bolts and wires going to the starter . Good luck!
Thank you my friend! There is nothing like a new tractor. You know it's gonna take a beating, but it sure is beautiful for a few hours!!! Lol. That Deer 4044 with the cab is one fine machine. Hope you are staying comfortable in the seat! Appreciate you.
Your tractor Also has mechanical injectors Which makes it nice & easier to work on and no computer to run your injectors. And also they have A lot less sensors To go Bad. It's a heck of a tractor I have a 3515 TYM and a 58 horsepower TYM Only little problem I've had was I had to adjust my clutch pedal at a 110 hours on the 3515.
Thanks for the feedback Ronald. I have heard nothing but great things about the TYM engines. I love that there are less sensors, makes me feel better about long term ownership. Which 58 do you have?
A rear camera would be great. I have not seen one on any tractor, added one to mine to watch the bush hog. Watching you guys operate the Baumalight mulcher makes my neck hurt!
Ha! Yes, the Baumalight mulcher going backwards isn't ergonimic...but it can go forward in thick weeds and brush and that makes it a bit easier to handle. So much better than a chainsaw and mulcher. Hank has a rear camera on his machine, I am so used to using the mirrors it almost acts like a camera. Big tractors are coming out with that tech, very cool stuff.
Almost middle TN here also, Cookeville to be close. I have a Branson 2400, had it since 2016 or so and love it. I have a tiny version since I only have 5 acres but it's great.
Thank you my friend! It's a really nice rig. It's no longer as clean as it was, but the ac blows cold and it sure likes to mow and put in food plots!!! Excited to share more with it.
Congratulations. That’s a very nice tractor. I live in Michigan and now am building a home in the snow belt along Lake Michigan. My R4s look cool and work fine in the dirt and are very puncture resistant but absolutely suck in deep snow. I’ll probably need to add chains for the new property.
Thanks for watching man! And yes, new tractor day is exciting! The R4'w have always worked for me, but we don't get snow. Just a LOT of thorns so the R4's keep the tires inflated. Lol. I sure would like some snow right now, still too HOT!
Thanks buddy! Don't worry, I am not a Kioti turncoat Both excellent machines. Fun getting back behind the seat of a 50+ hp machine. Super nimble and fun to drive! And the RX isn't going anywhere! ;)
I regret not going with RK -TYM ,went with a Kubota MX5400....for the money I could have gone with a cab tractor of the TYM.....smart purchase on your part.
Never too late brother. I started with an open station and after the second summer it was time to get the cab. Can’t go without it. Totally different machine. But the mx5400 is a fantastic machine.
Lol the transformers logo! I said that when i started looking at TYMs! My T25s head lights and grill look like a transformers face. Would love for someone to come up with some kind of concept art of a TYM transformer
Great video ... but I don't like the 3rd function valve.. Motor sounds great .. I really like how simplified these motors are!! Look forward to your in-depth review after you put it to work!
You can still widen your rear wheels without spacers. You’d remove the wheels, then unbolt the pan and reverse them out, and you’d probably gain more width than you would with spacers alone.
I was wondering if they were at their widest. Looks like it could go wider. I'm gonna look into it before getting them filled...AND when it cools down! Appreciate you watching.
You don't see that glass oil level indicator cause when you use mulcher debris going to smash that glass there and oil will drainout and if you didn't notice before using it again, it could be catastrophic
My tractors are all South Korean so I am sure that they are sourcing a lot of the same cab/dashboard/pedals/etc. It's the feel of the machine where you can tell the difference. Not better or worse, just a bit different. Appreciate you watching!
I’d say 3-5k depending on the model. That sounds like a big price jump for a cab ck. Always had a great experience with the LSE guys but never hurts to get many quites
It's not rebranded, Just different stickers and badging. This model is identical to the Branson 5520ch with a few upgrades (4 speed transfer, etc). The big tractor will still pull the batwing...it's too big for this guy. This machine has about 45 at the PTO and the batwing needs at min 60. I'd like to have the TYM 130 to pull it! That would be awesome. Thanks for watching
Hey Micheal, my tractor is part of a partnership with TYM. The 574 was not one of the options. The 5520 is a very similar machine, but the 574 cab is bigger. Same engine, etc. The 574 is legendary, great machine.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
New Tractor Day is a GREAT Day! No machine is perfect, and I plan to share the good and the bad with this TYM 5520ch.
To Follow Along Click Here! ===>>>>> www.youtube.com/@JoeTheFarmer?sub_confirmation=1
I just found your channel 😊 I am looking at buying a TYM 2515 R from Zemmermans in Newcastle Virginia. I have been looking at a couple of different tractor brands, and I think I've settled on the Tym. Anyway, thank you for talking about Jesus on your 15:07 videos. Keep that up...! Thank you for being real. I'm looking forward to more content. Be blessed.
Congrats JTF!! Beautiful looking rig! You will love it, the hydro will steal your heart, and it wil be productive!! Rock on brother!!
Thanks buddy! Come to TN and take this sucker for a joy ride!!
Let's get on with the much work needed done ! Congratulations Joe ! It's time to see it goes ,works ! we're excited .as you goes Joe s !.Enjoys Good days
Yessir! Tractor will be dirty in tomorrow's video.
Awesome machine, Joe! The Branson machines have a good history. Congratulations on working with TYM!
Thank you Lucas! Blessed my friend.
Congratulations! Great choice! Have fun with it, and again, welcome to the team!!
Thank you my friend! Excited to work it man. Love the note of that engine! More to come because its been busy. 💪🏼
Congratulations Joe. Looks great! Very nice TYM tractor.
Thanks Marty! Excited to share what it can do!!!
Nice Joe. You’ll get stuff done now. I know our friend Tony and Tonja have a lot of good experience with theirs. Congratulations buddy.
Thanks Dean! Tony and Tonja are the pro’s when it comes to TYM. Excited to share what I can do!
Awesome!!! I love my 574.
Just had a few loose hose clamps, on the cooling system. Other than that, no issues with 140, hard digging hours.
I’ve got the same tractor. Extremely happy with it. I’m super happy I went with a cab and AC here in TX. We got a lot of work done in 100+F heat.
Awesome to hear! I love it so far. The cab is a bit tight for me, but the machine has been fantastic in the heat. More to come tomorrow on this machine. Appreciate you watching!
Congratulations on your new tractor. Thank you for the info on interstate batteries. I never knew that. Thank you for posting 😀
Thanks for watching! I think sharing information like that is important. I would spend a bit more knowing where the money is going.
Very nice touch for the farm. That tractor will do all the work that you throw it's way. Have fun and keep those videos coming.
Thanks Tom; we're gonna have some fun for sure! Thanks for watching.
Nice tractor, Joe. That should handle pretty big jobs. Happy for ya. Great video. Thanks for sharing and have a great weekend!!
Thank you sir! It is a solid machine and a nice cab to get some work done. Tomorrow it will be holding the grapple and the brush mulcher. Don't plan on any moss growing on it! Take care and have a great evening.
I miss middle Tennessee.. Graduated from Dickson Co in 75. Beautiful part of the country,
We love it here. Well, except for the humidity. Lol. It is beautiful here... Where are you now?
@@JoeTheFarmer not too far , Huntsville AL
We have lots of family in Huntsville. Growing like crazy!!!
@@JoeTheFarmerHuntsville is growing like crazy
Congratulations on your new TYM tractor , I also purchased a TYM 4820ch. it's a great tractor. Please check all bolts and wires going to the starter . Good luck!
Great tips; thank you!
Sweet!!!! The center of gravity is important here in TN because we are hilly. That's one of the things that makes TN beautiful.
Totally agree. I just want to enjoy the view vertically on the tractor! 🚜 🤣💪🏼
Awesome, Joe! Looks great!
Thanks Ed! Appreciate you my friend
Oh man I love the 4 range tans!! I've always wanted that!! Good deal!
Love the cab JOE GOOD visibility
Me too!
Beautiful tractor Joe! Congrats! I have a John Deere 4044R cab tractor, love it on those hot summer days and cool fall mornings!
Thank you my friend! There is nothing like a new tractor. You know it's gonna take a beating, but it sure is beautiful for a few hours!!! Lol. That Deer 4044 with the cab is one fine machine. Hope you are staying comfortable in the seat! Appreciate you.
@@JoeTheFarmer 👍🇺🇸
Congrats on the new tractor. Cannot wait to see it in action.
Thank you my friend!
I went with a TYM T394 instead of a RK37 simply because of the rear lift lever on the back. Congrats on the new tractor Brother.
Thank you my friend! So excited!
Your tractor Also has mechanical injectors Which makes it nice & easier to work on and no computer to run your injectors. And also they have A lot less sensors To go Bad. It's a heck of a tractor I have a 3515 TYM and a 58 horsepower TYM Only little problem I've had was I had to adjust my clutch pedal at a 110 hours on the 3515.
Thanks for the feedback Ronald. I have heard nothing but great things about the TYM engines. I love that there are less sensors, makes me feel better about long term ownership. Which 58 do you have?
@JoeTheFarmer 5835R it's awesome !!
A rear camera would be great. I have not seen one on any tractor, added one to mine to watch the bush hog. Watching you guys operate the Baumalight mulcher makes my neck hurt!
Ha! Yes, the Baumalight mulcher going backwards isn't ergonimic...but it can go forward in thick weeds and brush and that makes it a bit easier to handle. So much better than a chainsaw and mulcher. Hank has a rear camera on his machine, I am so used to using the mirrors it almost acts like a camera. Big tractors are coming out with that tech, very cool stuff.
Awesome job
Appreciate that my friend!
Almost middle TN here also, Cookeville to be close. I have a Branson 2400, had it since 2016 or so and love it. I have a tiny version since I only have 5 acres but it's great.
Howdy neighbor! Great to hear you have had a good experience. So far I’m having a ball!
Good review details. Thanks!
Thanks for watching!
Nice Rig Joe 👍 Happy For Ya !
Thank you Brother!!!
Glad that you have a nice new tractor
Thank you Doc, I appreciate you watching!
That’s a beautiful machine Joe 😀👍
Thank you my friend! It's a really nice rig. It's no longer as clean as it was, but the ac blows cold and it sure likes to mow and put in food plots!!! Excited to share more with it.
Good looking tractor. I would set those rear wheels out - widen them if I were you. Can't wait to see how it performs.
Thanks Robbie, I think I am going to look into some spacers. Can’t be too safe on the slopes. Appreciate you watching!
Will be following for sure plan on upgrading next spring TYM is on the short list.
Awesome! I’ll be sure to let you know what this machine can do. 💪🏼. Thanks for watching!
Congratulations. That’s a very nice tractor. I live in Michigan and now am building a home in the snow belt along Lake Michigan. My R4s look cool and work fine in the dirt and are very puncture resistant but absolutely suck in deep snow. I’ll probably need to add chains for the new property.
Thanks for watching man! And yes, new tractor day is exciting! The R4'w have always worked for me, but we don't get snow. Just a LOT of thorns so the R4's keep the tires inflated. Lol. I sure would like some snow right now, still too HOT!
Yes Joe it does look interesting. However it still is NOT a Kubota.........
No sir, not a Kubota! But sure is a nice tractor! Take care brother
Wow! Nice tractor traitor 😂😊 Just kidding! I’m jealous. Sweet ride! Nice intro!!🇺🇸🚜
Thanks buddy! Don't worry, I am not a Kioti turncoat Both excellent machines. Fun getting back behind the seat of a 50+ hp machine. Super nimble and fun to drive! And the RX isn't going anywhere! ;)
nice one
Thanks brother. 💪🏼👊🏼
I regret not going with RK -TYM ,went with a Kubota MX5400....for the money I could have gone with a cab tractor of the TYM.....smart purchase on your part.
Never too late brother. I started with an open station and after the second summer it was time to get the cab. Can’t go without it. Totally different machine. But the mx5400 is a fantastic machine.
Nice tractor , I have a Kioti but I do like the TYM 👍🇺🇸🇺🇸
Hey David! I have a Kioti too. Great machine. Excited to work these TYM’s!
Lol the transformers logo! I said that when i started looking at TYMs! My T25s head lights and grill look like a transformers face. Would love for someone to come up with some kind of concept art of a TYM transformer
That would be awesome! They really are nice looking machines. Especially the 2515. Just looks mean with those LED's.
Great video ... but I don't like the 3rd function valve.. Motor sounds great .. I really like how simplified these motors are!! Look forward to your in-depth review after you put it to work!
It’s a diverter, used it today and worked well. I prefer a true 3rd function but worked well. I’ll keep ya posted brother!
I think it needs spacers. Metal hood! That's a win for me. What size cutter are you going to run? 7ft?
I think the tires need to be widened too. 6' cutter; I have that and a 15' batwing. This won't handle the batwing. Lol
You can still widen your rear wheels without spacers. You’d remove the wheels, then unbolt the pan and reverse them out, and you’d probably gain more width than you would with spacers alone.
I was wondering if they were at their widest. Looks like it could go wider. I'm gonna look into it before getting them filled...AND when it cools down! Appreciate you watching.
You don't see that glass oil level indicator cause when you use mulcher debris going to smash that glass there and oil will drainout and if you didn't notice before using it again, it could be catastrophic
You should put a metal sheet while using mulcher
Nah, not worried about that. I could be wrong, but the mulcher throws debris very low, not to the pto shaft or higher.
Never a bad idea to be safe, could be a good idea. But again, should be fine.
All of these tractors seem so much alike, like they sorce from all the same suppliers
My tractors are all South Korean so I am sure that they are sourcing a lot of the same cab/dashboard/pedals/etc. It's the feel of the machine where you can tell the difference. Not better or worse, just a bit different. Appreciate you watching!
Looks nice. How much extra for the cab. I got a quote from LSE today, $10k extra for the cab on a ck3520. Maybe I need to check with your dealer.
I’d say 3-5k depending on the model. That sounds like a big price jump for a cab ck. Always had a great experience with the LSE guys but never hurts to get many quites
👍
Hope all is well brother!
Interesting pros and cons. One can tell it's rebranded. Is this going to be the mowing tractor with a batwing?
It's not rebranded, Just different stickers and badging. This model is identical to the Branson 5520ch with a few upgrades (4 speed transfer, etc). The big tractor will still pull the batwing...it's too big for this guy. This machine has about 45 at the PTO and the batwing needs at min 60. I'd like to have the TYM 130 to pull it! That would be awesome. Thanks for watching
It definately has a computer. It will go into limp mode, and will do regen when it needs to.
I was told it will not. It will regen, but will not go into limp mode. But not certain
You need a lift arm om the back. I thought they came with it.
Agreed. That’s what was missing. 🤷🏻♂️
so what is the price range as I am looking to buy ?
With everything shown around $38k.
The wheels need to be wider
Agreed. Will be switching the wheel plates in a future video. Thanks for watching.
@@JoeTheFarmer that’s a great looking tractor
Thank you Clint, I think so too! It's not as clean as it was in that video anymore. Lol
I don't know why you wouldn't get the 574C.
Hey Micheal, my tractor is part of a partnership with TYM. The 574 was not one of the options. The 5520 is a very similar machine, but the 574 cab is bigger. Same engine, etc. The 574 is legendary, great machine.
@@JoeTheFarmer
Yes same engine, plus you would have the rear three point lift control.
Correct. And the lower window. All good; I am very happy with the machine...it's impressive.