Thank you for the video. The RME video on their webpage didn’t explain much. You have more detail. Thank you I’ll definitely be shouting you out on my post.
Hi the explanation was so good 👍 Please make a video, how to get mix and master final out by using Total Mix FX from daw ( logic Pro x ). It records by Total Mix FX no issues but i am unable to get same output when i export final out. if i play in another system or anywhere else the Total Mix FX is no more. So please explain or make an video, many RME users are unable to use Total Mix FX completely 🙏 even i am one among them 😁..!!
Hello, I hope you and your family are well. I wanted to ask you something that I am surprised about and I cannot figure out if it can be changed, noting that I am very happy with this sound card. On the MIC channel there is a gain button, gain and when I try to raise it it goes from 0db straight to 10db and it does not give me the option to go from 0 to 10 passing through 2,3,4,5,6,7,8 or 9 and I am hallucinating, is it possible to correct this or is it like this? It happens both in mic1 and mic2 but not in the following instrument channels where it can be done. Thank you very much in advance.
Quick question, I'm using a Neve 1073spx l to mix as plugin in my DAW. On the back on the Neve I have a compressor inserted. Do I need to enable +4 on on the in and out channel where it's connected in total mix fx?
I can only get sound from the headphones on my baby face pro fs device. Although it gives the speaker signal in totalmix, there is no sound from the speaker or my microphone. I have been going crazy for 2 weeks. I have tried everything. There is no problem with the cables. When I plug the same cables into my focusrite device, I can get sound from the speaker and microphone. I am fed up with this
Hello! I somehow misplaced Mainoutput (right down) in the total mix FX and now I am not able to control all those outputs...would please tell how can correct it or set it to the default settings
Very good from Groove3. I have a little problem with my connection. The signal does not appear in my software FL Studio. Here is what i do: first my mic goes to TC Helicon, from TC Helicon goes stereo to my mixer PV 10 ( first and second channel ), from mixer out to RME Fireface UC balanced line inputs 5 and 6. And of course RME is connected usb to my laptop with FL Studio 12. I have a signal in my headpfones but no signal in FL Studio. What is wrong ? Will be very grateful for your help.
i Hve the firece uc. so whre you set you monitors correctly? i and hardware stays ch. 7/8 but i dont hear nothing on channel 7/8 i just hear on channel 1/2
Hi hope you're doing fine 👍👍 I have a question that's, For many years i didn't use my rme interface ( baby face ) But just i connected to do a mix by use of Rme total mix fx but i couldn't get the exact output means ( i don't know how to get output of RME total mix FX in mixing and mastering, if it's possible plz help me. ( Hope you may help me and also many RME users are unable to use RME Total mix FX in logic Pro ) It's easy to get output but it doesn't sound same after getting final out and playing in any-other players like in a car or another studio etc etc. ( And also don't know to use the loopback option in RME Total Mix FX ) please help me 🙏😁
Hello, I have a RME UCX. I wonder if you can help me. TotalMix FX is not working correctly for me. There are no faders on Input channels. I cannot route mic ins to 7?8 phones out. I have updated to latest drivers and latest version of TotalMix FX, nothing has changed though, the problem remains. Is there a way to uninstall TotalMix FX and related files. - Kevin O'Brien
Hi i have rme im not much abut it ,I need to know how can i fix metronome sond .at the moment not working and allready troy to fix from cubase but i couldnt fix,please let me know if you can hellp.thanks
Guys i need help. I cant seem to get my guitar to play back or record from my baby face fs in cubase 10.5. Ive tried everything and im not getting results. I figured out how to at least get my project working out of the speakers. But no matter what i do, i cant record or get a signal in cubase , but the actuall interfacce has a signal. Also in standalone with example guitar rig , andy james etc, i cant seem to connect the guitar to play through. I just switched from a focusright 2i4 that was SIMPLE AS HELL. Any help would be highly appreciated. Thank you!
Finally someone who actually explains everything. The RME videos tend to just go over broad features. Thanks. I need a book “Total mix for Dummies”!
3 years later and i'm sitting here thinking the same exact thing
Way better than any of the tutorials from RME
Thank You 🤘
Thank you for the video. The RME video on their webpage didn’t explain much. You have more detail. Thank you
I’ll definitely be shouting you out on my post.
This is one of the best explanations I'v found. Thank you, *Groove3*
Finally an explanation on the mc processing
Hi the explanation was so good 👍
Please make a video, how to get mix and master final out by using Total Mix FX from daw ( logic Pro x ).
It records by Total Mix FX no issues but i am unable to get same output when i export final out. if i play in another system or anywhere else the Total Mix FX is no more. So please explain or make an video, many RME users are unable to use Total Mix FX completely 🙏 even i am one among them 😁..!!
THIS is what I've been looking for.
Hello, I hope you and your family are well. I wanted to ask you something that I am surprised about and I cannot figure out if it can be changed, noting that I am very happy with this sound card. On the MIC channel there is a gain button, gain and when I try to raise it it goes from 0db straight to 10db and it does not give me the option to go from 0 to 10 passing through 2,3,4,5,6,7,8 or 9 and I am hallucinating, is it possible to correct this or is it like this? It happens both in mic1 and mic2 but not in the following instrument channels where it can be done. Thank you very much in advance.
good video totalmix is pretty cool but a bit to get my head around
Thanks you so so so much, I was looking for phantom device information ... brilliant !!
Thank you very much. So helpful
Quick question, I'm using a Neve 1073spx l to mix as plugin in my DAW. On the back on the Neve I have a compressor inserted. Do I need to enable +4 on on the in and out channel where it's connected in total mix fx?
I can't see the part of the video during a critical part because of the ad is blocking my view. Thanks a lot.
just close the ad then
I can only get sound from the headphones on my baby face pro fs device. Although it gives the speaker signal in totalmix, there is no sound from the speaker or my microphone. I have been going crazy for 2 weeks. I have tried everything. There is no problem with the cables. When I plug the same cables into my focusrite device, I can get sound from the speaker and microphone. I am fed up with this
how are the outputs of the used DAWs, VSTi, Audacity, Serrato, iTunes, etc. be assigned to the various channels?
Hello! I somehow misplaced Mainoutput (right down) in the total mix FX and now I am not able to control all those outputs...would please tell how can correct it or set it to the default settings
Very good from Groove3. I have a little problem with my connection. The signal does not appear in my software FL Studio. Here is what i do: first my mic goes to TC Helicon, from TC Helicon goes stereo to my mixer PV 10 ( first and second channel ), from mixer out to RME Fireface UC balanced line inputs 5 and 6. And of course RME is connected usb to my laptop with FL Studio 12. I have a signal in my headpfones but no signal in FL Studio. What is wrong ? Will be very grateful for your help.
Excellent. I’ve not taken full advantage of totalmix.
How get mix output after mixing a song by totalMix FX in logic Pro, plz make an video and explain. Thank you
Thanks, man
For the Line output, how to know which device needs -10dBV and not +4dBU?
Thank you very comprehensive
i Hve the firece uc. so whre you set you monitors correctly? i and hardware stays ch. 7/8 but i dont hear nothing on channel 7/8 i just hear on channel 1/2
in daw mode i can only hear input when on cue any help with this please ?
Hi hope you're doing fine 👍👍
I have a question that's,
For many years i didn't use my rme interface ( baby face )
But just i connected to do a mix by use of Rme total mix fx but i couldn't get the exact output means ( i don't know how to get output of RME total mix FX in mixing and mastering, if it's possible plz help me. ( Hope you may help me and also many RME users are unable to use RME Total mix FX in logic Pro )
It's easy to get output but it doesn't sound same after getting final out and playing in any-other players like in a car or another studio etc etc.
( And also don't know to use the loopback option in RME Total Mix FX ) please help me 🙏😁
Hello,
I have a RME UCX. I wonder if you can help me.
TotalMix FX is not working correctly for me. There are no faders on Input channels.
I cannot route mic ins to 7?8 phones out.
I have updated to latest drivers and latest version of TotalMix FX, nothing has changed though,
the problem remains. Is there a way to uninstall TotalMix FX and related files.
- Kevin O'Brien
Hi i have rme im not much abut it ,I need to know how can i fix metronome sond .at the moment not working and allready troy to fix from cubase but i couldnt fix,please let me know if you can hellp.thanks
hello, good morning, I would like to know how do I enable phantom power on mer card hdsp and madi fx? thanks ryldo
Guys i need help. I cant seem to get my guitar to play back or record from my baby face fs in cubase 10.5. Ive tried everything and im not getting results. I figured out how to at least get my project working out of the speakers. But no matter what i do, i cant record or get a signal in cubase , but the actuall interfacce has a signal. Also in standalone with example guitar rig , andy james etc, i cant seem to connect the guitar to play through. I just switched from a focusright 2i4 that was SIMPLE AS HELL. Any help would be highly appreciated. Thank you!
Have you chosen the correct channel in your DAW? For DI it should be channel 3-4.
I want to route a synth into inst 3/4 but im getting no sound :(
Hi, Travis. Did you find a way to record? I'm completely stuck!
I have the same problem as Travis: can't route synth into 3 and record. I get nothing....
hi good morning, I would like to know how do I enable the phantom power on my hdsp card and madi fx? thanks ryldo