* Whispering* Here we see a service mechanic in his natural habitat. This particular kind of mechanic is rarely calm. Most of his relatives aren't this calm. Most of them start throwing tools around when they have set backs like we see here. Often they also make a lot of noise doing that. But not this one. The guyos wyomingus is, like said before, very calm and therefore very rare. We don't see them that often. Good to see you Blake 👍👍
Thanks for the video. A guy would almost think you love that trailer from your comments L.O.L. This video is the whole reason I don't farm with my dad anymore, Go to do something and end up fixing the stuff he wrecked and never told anybody before doing the actual job I was supposed to do. I have several shop customers I'm trying to convince to go someplace else to, their machines aren't worth the time in the shop, they have way to many issues. I did a head gasket on a tractor recently, the guy says service it to as he can't remember the last time it was done ! ok engine oil filters so tight I had to remove the filter housing to get the filter off in the vice, because every way I tried shredded the filter. Then the fuel filters were changed and it wouldn't prime up and bleed. All the fuel lines were shot under the cab from the tank and pulling air. By the time I'd got the loader stay off that was seized to the axle to get the tank out to get access and fixed it, that was a 4.5 hour $225 extra on it's own. The guy thinks he should only pay me $25 for changing the filters without all the other messing around on top of the original repairs. He's not the only one so I want them to head to another guy that charges more money and see how that works for them when his bill for the B.S appears . Take care
My Bobcat (743) stopped running on me once. Getting it loaded on a trailer was a REAL PITA, as they don't roll when not running. A lot of yanking with my Toyota, plus another skidsteer, finally got it on. Shop used a big forklift to get it off. Later I learned that you can crack a hydraulic line (to drive motors) and it will roll, pumping all the fluid out as you go! Fun times, now I know why heavy equipment is fixed "in place" more often then not ;)
None steer, much skid, such sh*t 🤣 By the way, amazing pick on the microphone! I know you got a bit of flak for audio before so please know it is much noticed and most appreciated! :)
Thanks Blake for your video... Much like your video, I’ve had a very challenging day... actually a few in a row... your perseverance and focused on the end result, working through the one after another challenge to arrive at a successful outcome reaffirms keeping focused on the positive and having faith work....and yes that is a good trailer ‼️
AAaaaaaaah the joys of working on older equipment . The owner must have never heard the analogy pay me a little now or pay me a lot later . Glad it was a simple fix and not have to pull the pumps . I hated when a hose blew on my skid steer , there's usually no room to work on these things
Hello from the Netherlands . if you hang the battery box and remote control box under your tilt deck, you can keep the power cables nice and short and they can't get in between. thanks for the video. Sincerely Hollandduck from the Netherlands
Ur vids always make me feel better about my career choice although it is still interesting work. Tow master is the name of that little-big trailer? I like it. Had to rent an 18’ 10k tilt trailer last year, I liked it too but she was a heavy dog. Your’s looks perfect for so many uses.
The old missing bolt! Like the missing fuse. Where'd it go? No one knows...
Absolutely nothing going your way, but you didn't lose your cool. You are a good man.
That trailer looks like it was made for skid loaders just that size 👍 nice find
* Whispering*
Here we see a service mechanic in his natural habitat. This particular kind of mechanic is rarely calm. Most of his relatives aren't this calm. Most of them start throwing tools around when they have set backs like we see here. Often they also make a lot of noise doing that. But not this one. The guyos wyomingus is, like said before, very calm and therefore very rare. We don't see them that often.
Good to see you Blake 👍👍
Sounds like one of those quick little jobs that take a day to get started !
Good job, and glad you didn't get hurt. A few simple problem things can cause big problems. Cool trailer. 😎
I'm glad I see that I'm not the only one who days start off like this. Sometimes it makes you want to truly quit then u remember you live this stuff.
The Lavalier mic is absolutely amazing. Listening to you just talk to yourself puts a cherry on top, it reminds us that we’ve all been there.
We all have one of those days where nothing works as it should. 🤙
Thanks for the video. A guy would almost think you love that trailer from your comments L.O.L. This video is the whole reason I don't farm with my dad anymore, Go to do something and end up fixing the stuff he wrecked and never told anybody before doing the actual job I was supposed to do.
I have several shop customers I'm trying to convince to go someplace else to, their machines aren't worth the time in the shop, they have way to many issues. I did a head gasket on a tractor recently, the guy says service it to as he can't remember the last time it was done !
ok engine oil filters so tight I had to remove the filter housing to get the filter off in the vice, because every way I tried shredded the filter. Then the fuel filters were changed and it wouldn't prime up and bleed. All the fuel lines were shot under the cab from the tank and pulling air. By the time I'd got the loader stay off that was seized to the axle to get the tank out to get access and fixed it, that was a 4.5 hour $225 extra on it's own. The guy thinks he should only pay me $25 for changing the filters without all the other messing around on top of the original repairs. He's not the only one so I want them to head to another guy that charges more money and see how that works for them when his bill for the B.S appears . Take care
Good one... I like your mechanical fix-it videos,
Oh dear never seen you so frustrated - glad you got it running (to the owner's satisfaction). 🇬🇧😊
My Bobcat (743) stopped running on me once. Getting it loaded on a trailer was a REAL PITA, as they don't roll when not running. A lot of yanking with my Toyota, plus another skidsteer, finally got it on. Shop used a big forklift to get it off. Later I learned that you can crack a hydraulic line (to drive motors) and it will roll, pumping all the fluid out as you go! Fun times, now I know why heavy equipment is fixed "in place" more often then not ;)
I always enjoy your adventures buddy...keep them coming !!!
Good to see you Blake sounds like your day is going like most of mine LoL
Hahahaha
If you've ever had a skidsteer problem, you can relate to this. Much funnier watching someone else. TY. 🤣
None steer, much skid, such sh*t 🤣 By the way, amazing pick on the microphone! I know you got a bit of flak for audio before so please know it is much noticed and most appreciated! :)
Somedays just say nope and go back to bed.
Great video! When you get a chance, show us your fixings, how you do to fix what needs to be fixed, that way we can learn, if possible.
Thanks Blake for your video... Much like your video, I’ve had a very challenging day... actually a few in a row... your perseverance and focused on the end result, working through the one after another challenge to arrive at a successful outcome reaffirms keeping focused on the positive and having faith work....and yes that is a good trailer ‼️
Laughed thru the whole video........ Well done
Never a dull moment with you Blake.
One of those, "if it's not one thing, it's another" days!
Blake has posted a video!!!! Thank you Blake. 😃👍
Nice to see you back.
Thanks Blake....glad you put us a video up! Seems long time You Tubers I enjoy watching are just about all burned out.
Remember, you accepted the mission.....lol
Great video Blake your a fine mechanic ! I enjoy watching your videos keep up the wonderful work .
I miss your videos
Well, what started out as a rough day at least turned into some minor repairs :)
Drove by last weekend. Waved from I-80. Great stuff.
More Later.
I sure enjoy giving your videos they are great
good job man glad you have a good work ethic I hope some young people see how hard you good video
AAaaaaaaah the joys of working on older equipment . The owner must have never heard the analogy pay me a little now or pay me a lot later . Glad it was a simple fix and not have to pull the pumps . I hated when a hose blew on my skid steer , there's usually no room to work on these things
Great work Blake! Really enjoyed your analysis on this one! Thanks for the video!
Good job Blake , one of the few days the wind was not blowing out there in WY , wow that thing was a poor engineering job on that case.
LOL....All that complaining about nothing working right sounds VERY familiar.....like it it's me trying to get something done!
The struggle is real, glad it's not only me that has these same issues.
Man it seems like every time I try to do something it goes about like this! Lol I know your struggle ..
Can you post more videos about your new truck bed! I wanna find one like it for myself one day!
I keep trying to do a whole video on it, but stuff keeps getting in the way. Hopefully soon.
I keep trying to do a whole video on it, but stuff keeps getting in the way. Hopefully soon.
Those things have always started poorly. Frustrating to say the least
Hello from the Netherlands .
if you hang the battery box and remote control box under your tilt deck,
you can keep the power cables nice and short and they can't get in between.
thanks for the video.
Sincerely Hollandduck from the Netherlands
You know if you push the button on the seatbelt latch the finger goes off😉
I did not know that. I’ll try it, thanks!
So its now a skid not a skidsteer?😆
Fun parts are when other people either take out on each other or work together alone just got yell at your self smell your own farts blame the dog.
That renault r688 continental is garbage I put kubota v1305 in my 1830 night n day diff
Great video. How do you like that trailer?
It’s pretty ok.
Hell yea excellent video my friend keep making with those videos
16:07 Well it works now after you fixed the winch. You have a long ways to go on getting that trailer in shape.
When I worked construction they had a trailer similar to that trailer hauled much larger skid loaders
Over kill on the load up my guy try cutting ✂️ more out and get more attention in thanks for the video.
Ur vids always make me feel better about my career choice although it is still interesting work. Tow master is the name of that little-big trailer? I like it. Had to rent an 18’ 10k tilt trailer last year, I liked it too but she was a heavy dog. Your’s looks perfect for so many uses.
Forget watching the video,just listen to this hillarius audio commentary.
7:33 cause life's a bitch! Been there done that!
handy little trailer! what brand and model is it!?
Towmaster DT-5. Or TD5. Something like that.
Blake's stopped posting 😁
Wow I'm not the only one that gets carpet bombed with problems like this.
Lol sounds like a Monday??
👍👍👍👍
Hiya Blake
Hi
What's up