Hard work and finish is okay but I would advice bus manufacture to look at some German buses and improve the taste for quality rather than going for traditional flamboyant appearance
My concern in watching was I saw only one man wearing some eye protection while they were welding but not sure if his glasses were even approved for welding they will go blind if they continue to weld without the proper safety equipment. And you only have two eyes think about your family's.
Nice job and this one has the roll cage effect with those metal cross members at the top but i have issues with the dash,that metal dash wont save a driver in case of a front end crash which happens a lot with these plain faced buses. and kills drivers a lot.A metal tube frame across the front with plastic or even card dash covered in leather would suffice.
U did a great job,but try to keep things simpler,be it colour combination or interior glass works and try minimal use of stickering,otherwise ur work quality was top notch
bro here in india people rarely use bus transport... bangladeshs lifeline is Bus travel..their buses are like flights... our country doesnt need it and not economically feasible..bangladesh trains are shit thats why there is demand for bus travel.... dont compare their greenline or Ena with this bus... their fares are 1500-2000 while this bus will fetch maximum 400 for n0n AC
You are right. No even Bangladesh even in Pakistan they manufacture far better buses. Whole world manufactures bus bodies with Aluminum but In India they still use 50 year old techniques and build buses with steel rods !
थैंक यू ब्रो ऐसे वीडियो के लिए बहुत अच्छा लगा इस वीडियो को बनाने में आपका बहुत टाइम लगा होगा वेरी गुड ब्रो
Thank you very much 👍
@@busmanufacturer l
Irygksot
Золотые руки у мастеров!Дай Бог им здоровья!
❤❤
Beatiful job. You can split the windshield into two or even three parts for ease of maintenance, easier transportation and, I believe, cheaper.
Thanks 🙏
Bohot Badhiya Bus Body Tuhada Kaam B Tasli Bala 💯 Tusi Sareyan Da Comment Dekhde Ho Thanks Bir Ji Te Reply B Dindde Ho GD JOB Bir Ji 🌹💐🌸🥀🌷💐🍁🌹
Thank you 😊
Hard work and finish is okay but I would advice bus manufacture to look at some German buses and improve the taste for quality rather than going for traditional flamboyant appearance
Ok sir
I’ll suggest my costumers to demand german like buses. 👍
@@busmanufacturer à mi me gusta mucho este bus y sobre todo nunca copien nada à los alemanes. Sean siempre authenticos y valoran lo suyo.
Thank you 🤩
Karan bus body builder always done some mind-blowing work
Thank you
Wow nice beautiful bus😍😍😍😍😍😍😍👌👌
🙏
જબરજસ્ત કામગીરી દિલથી પૂરી ટીમને ધન્યવાદ દિલથી સેલ્યુટ વાપી ગુજરાત
Hindi or English only
Very neat and clean work 👍👍👍
From 🇲🇨🇲🇨 good job. 👍👍👍
Thank you
बहोत बडीया 👌👌👌
Wow awsome Nice👍👍👍👍👍👍👍
🙏
Hi kazi naipenda sana tena sana allihamdulillah na Allah akajaria kuwa ndiyo kazi yangu
safi
Diindonesia juga ada bus sleeper
Cinta dari indonesia ❤🇮🇩
❤️
बेस्ट किया मेनत कि है जबरदस्त ❤🎉
You cant see the Indonesia Bus...
Thats Good....
Grabi npakanda..good job mga bro.
👍
bohut khubsurat 🙏👍👍👍👍
🙏🫡
Oh my good,, goodjob amazing
Thank you
Proud of you all 👏👏 🎉Our Indian engineer ✌️✌️🫡🫡
✌️👍
It's Not engineering it's juggadu Kam 😂
My concern in watching was I saw only one man wearing some eye protection while they were welding but not sure if his glasses were even approved for welding they will go blind if they continue to weld without the proper safety equipment. And you only have two eyes think about your family's.
just like in the philippines we don't usually use safety equipment unless it needed in some areas of work.😁
think about family? if we become developed like america we probabaly woont have a family..i bbet 90% your parents are divorced
Oh Amazing♥♥♥♥♥
❤ buti full bro thanks stills boss
Thank you too
Nice job and this one has the roll cage effect with those metal cross members at the top but i have issues with the dash,that metal dash wont save a driver in case of a front end crash which happens a lot with these plain faced buses. and kills drivers a lot.A metal tube frame across the front with plastic or even card dash covered in leather would suffice.
If the bus was insulated it would have been so quiet amd cool
Full complete video nice work done
Thank you
U did a great job,but try to keep things simpler,be it colour combination or interior glass works and try minimal use of stickering,otherwise ur work quality was top notch
Thank you for the advice.
By the way this is our costumes choice.
Whatever they say, we do. 🙏
Bahut badiya❤❤❤
👍
私も色々作りますが、このバスの製作には感動しました。❤
🫶👍
India có nền công nghiệp phần mềm đúng nhất nhì thế giới. Chỉ sau thung lũng silicon Usa. Mà sau nền công nghiệp chế tạu cơ khí còn lạc hậu dữ vậy.
❤ super work
Thanks 🤗
Adi putro
Laksana
By made in Indonesia
Is the best
👍👍👍
👍
Super channel no 1
Thank you
Good work 😏
Thank you
👌👌👍♥️
👍
yellow collor ...nice 😀
🙏
Amazing job
Thanks!
Good work 👍❣️
👍
no air conditioner?
I was wondering also because this must have Ac at all costs.Probably the vents are in the matress and freezes you like a piece of fish.🤣🤣
nice bus
👍👍👍
✌️
Best Best information
🙏
Fantastic my friend 🙏
👍😘
Kya ye bus ARAI certified hai ya bas aise hi generic brand ki hai.
Yes, these are certified with ARAI, ISO AND FORM 17
Крутой процесс производства! Интересно посмотреть 😁😁😁
Pp
L
я бы поехал в этом автобусе только с благословения батюшки и с православным крестом
Kitne din main complete hua body?
Good job,
Thanks!
Bhai new ashok leyland ac slepper bus manufacturing vdo dalo 💯💯👌👌🙂
Ok
Beautiful ❤️
Go for LNG mode and save money and environment. One fill can travel 1000 KM plus.
All the best
Ok thank you
8:44 ye toh kuch mahine baad Aram se nikalna start ho jayega
How much does the structure weigh?
Approximately 4 tons
Hello sir....can the chassis of tata 1918 be made into sleeper bus ?
I think it is a truck chassis.
Great job bro
👍🫡
Good very nice pic 👍
👍
???????!!!!!
Good brother
👍
🚌🚌🚌🚌 super 💞💞
Non AC sleeper bus kitne me ban jayegi 15 sleeper or 21 sits kam se kam price me
16 L
बहुत अच्छे
Muy buen trabajo 👍👍👍👍👍
👍
Tudo bem que o ônibus é de brinquedo kkk mais os caras são muitos inteligentes
🇲🇨is good product bus sleeper seet..
Body aur engine kitne main ho gaya
Means bus kitne main ready to gaya
Is this BUS full A/c
No, open air
Adiputro, Laksana, menangis lihat ini ..😂
Is chasis old or new ones?
New
Great work😊
👍
Kitna din laga baane mai??
3 month
Good body work ... However fixing of the wall boards up side down in the cabins look very very odd and unpleasant ...
👍🫡
Superb 🤘
Thanks 🤗
Bhai kitne din laghe he bus banane
90 days
Смотрю на сварщиков и думаю, во медицина у них скаканула, глаза в любой аптеке продают
Ye bus sell kitne ko hoga??
Ye bus sell nhi hoga abhi kyoki ye abhi abhi manufacture hua h
Nice 👌👌👌👍
Thanks 😊
Very nice 👌
Thank you
Nice luxurious bus...
Bus kitne din mein ready hua
3.5 months
Good job sir
Ek bus banakeliye kitna din time lagega bhaiya
75 days minimum
Company me 1-2 दिन मे पूरा complete
@@busmanufacturer a
30-35 days
6din
I wish you use fiberglass for dashboard instead of sheet metal...it's a lot easier to shape and fabricate.
Ek bus body banane ka cost kitna hota hai same
9 L
Beautiful bus Price kiya Es ka
14 lakh
How much do you get in a US dollar?
the model is too stiff, still a good sleeper bus from Indonesia
🙏
Nice👌🏻👌🏻
Thanks 😊
"I Am Going To 'Purchase' This Sleeper BUS"
👍
Ek Bus banane me ketna pesa yani rupay lagte hai bhaiya please reply Dena
10 lakh se start he and goes higher
Круто, очень круто
👍
Kimat ketli che Bas ni Salipar coxh
14 lakh
@@busmanufacturer Nave ke
How much do you get in a US dollar?
@@devghadbariyaofficially1762 How much do you get in a US dollar?
Puri bus ka price keya hai Seth ji ❤
What is the cost of complete body to make
16 lakh
@@busmanufacturer كم بدولار تقريبا
Bangladeshi bus body manufacturers do much better job. Their design is modern.
Ok
So you go there... ☝️☝️☝️☝️☝️
@@SunilKumar-zk6izI'm here in Bangladesh. Don't remain frog in the well!
bro here in india people rarely use bus transport... bangladeshs lifeline is Bus travel..their buses are like flights... our country doesnt need it and not economically feasible..bangladesh trains are shit thats why there is demand for bus travel.... dont compare their greenline or Ena with this bus... their fares are 1500-2000 while this bus will fetch maximum 400 for n0n AC
You are right. No even Bangladesh even in Pakistan they manufacture far better buses. Whole world manufactures bus bodies with Aluminum but In India they still use 50 year old techniques and build buses with steel rods !
What will be the total cost? in body as well as the chassis
we only know about the body
Any indian bus made with a/c?
Yes videos coming soon
So beautiful
👍🫡
Ek luxury banane me kitna kharcha aainga bro please tell me...?
14 lakh starting
@@busmanufacturer thanks
Ye bus kitne me bankar tyar hui he❓❓
14 lakh
@@busmanufacturer isme Ac panel b include rhta h kya ji
@@busmanufacturer 000aà
Hi
Учитывая, что заводской автобус стоит в два, а то и в три раза больше грозовика- то совсем не дорого.
Nice work
Thanks
Iska total price kya hai pura mila ke
14 lakhs for body
How much do you get in a US dollar?
Wow awesome
Thank you
how many months to make bus
3-4 month
Nice 👍
Thanks ✌