HOW TO DRAIN COOLANT ANTIFREEZE ON MERCEDES W208 W202

Поделиться
HTML-код
  • Опубликовано: 1 ноя 2024

Комментарии • 20

  • @AutoRepairGuys
    @AutoRepairGuys  6 лет назад +1

    ⛐ Check out our Garage to see what tools we use and recommend:
    www.amazon.com/shop/worldmechanics
    ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ruclips.net/user/AutoRepairGuys
    ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

  • @olaf19k65
    @olaf19k65 6 лет назад +2

    Thanks man greet from Poland

  • @TroyaJamilyn
    @TroyaJamilyn 4 года назад

    You guys have such helpful videos. Thank you so much!

  • @orelhazan8705
    @orelhazan8705 6 лет назад +2

    what coolant should i use for CLK w208 2001 3.2L? it need to be green?
    what sheet i need to look for on the coolant label?

    • @Mr.Riffian
      @Mr.Riffian 6 лет назад

      Orel Hazan RTFM

    • @orelhazan8705
      @orelhazan8705 6 лет назад +2

      REALLY ?? TNX GOD UR HERE!
      I don't have the manual
      and in all manuals online writing to use "recommended coolant" so what is recommended?
      thank you for NOT helping !

    • @garyzhang5099
      @garyzhang5099 Год назад

      G48 for current mb coolant standard

  • @asimshah2055
    @asimshah2055 4 года назад

    nice video have you made any video regarding "kick down is not working " in cdi 99 model E 220

    • @jenrriramirez3266
      @jenrriramirez3266 4 года назад

      Are you talking about kick down switch?

    • @asimshah2055
      @asimshah2055 4 года назад

      i replaced kick down switch , throttle sensor but kick down is not working. It works once after every new start ot you switch off the car and start then it work onve will not work again till next switch off

    • @jenrriramirez3266
      @jenrriramirez3266 4 года назад

      You will need to get the codes reset. If you haven't done that, that will fix it. If not next step will be conductor plate.

    • @jenrriramirez3266
      @jenrriramirez3266 4 года назад

      But doing a code reset should fix the problem my friend. Good luck

    • @asimshah2055
      @asimshah2055 4 года назад

      ok. you mean transmission conductor plate, having solenoid?

  • @thenikonrocker4511
    @thenikonrocker4511 5 лет назад +7

    You guys are skipping a very important step. Whenever you flush and replace the antifreeze & water in your car, you don't just drain the radiator, and your coolant overflow tank. You also have to open the coolant drain plug on the engine block, and drain the old coolant out of the block. This way when you refill your cooling system with new antifreeze and water, you will know that your entire cooling system, has the proper mixture of antifreeze & water. You have to have the right mixture ratio of water & cooolant, whether it takes 50% antifreeze & 50 % water .... or ....70 % antifreeze & 30% water. If you dont have the right mixture, your car will overheat , or worse.

    • @offgridprosperity
      @offgridprosperity 5 лет назад +2

      thats why after u drain it, run some water thru it, then drain the water, then fill with the right mix.. it will only be about a cup or two of water in the actual block so accounting for that isnt a problem as it mixes immediately anyways...

  • @r.fumador1146
    @r.fumador1146 2 года назад

    YES, thanks
    YES

  • @BorisBidjanSaberi11
    @BorisBidjanSaberi11 Год назад

    Why not drain the engine block coolant too?

  • @iamher6422
    @iamher6422 10 месяцев назад

    I learned absolutely nothing with this vid. How do I flush? How many times? With what? How do I refill? What type of aftermarket coolant is safe to use? Should I also replace the thermostat? 🤷🏼‍♀️