Hi Yoram, thank you for the video. Could you please specify which Ninja BB did you choose? I found this one wich sounds correct: Ninja PF30 BB 30mm? I hope to use it with my old 30mm spindle and crank. Thanks
Assuming you want to keep the existing crankset. You need a MTN 83-Ai FRAME (46 x W83) with CANNONDALE HOLLOWGRAM MTB CRANKSET (with 137mm SPINDLE), it is compatible with Token TF4630 + M83. Looking back, it was an opportunity to change to a standard crankset that opens a larger variety of products. But then you also need to invest in a new crankset, that I wanted to avoid at the time.
@@YoramPomer thank you for your reply, much appreciated! I hope you will make another video if you decide to change your crankset for another brand, because this whole crank arm AI offset on the f-si gives me headaches. I am running a hollowgram crankset (si/one, ck141...) on a 137mm spindle with a spider for a 2x11 drivetrain. I was planning to switch to 1x12 or 1x11 but could not figure out which crankset or sprocket would work. Is yours basically the same as mine but instead of the spider you run an oval chainring? And if, which one :) Thanks again!
@@lukasn.9399 AI is great, but is also a headache because it’s non standard. I moved to 1x11, which is so smooth. A 1-12 would have been a big investment that I couldn’t afford. The oval chainring that I am using is made especially for AI. And you should keep it this way or else the chain will keep falling. I can highly recommend the one I am using. It’s expensive, but also fun . absoluteblack.cc/cannondale-oval-direct-mount-chainring.html
Hi@@YoramPomer , thanks again for the information. the ring looks awesome. I will consider 1x12 for the next rebuild some time in the future :) This time I found the original replacement chainrings in an italian online store after searching the web for a week and talking to fsa in the USA.I have also ordered the token ninja form a polish online shop (token distributor). Very helpful seller. Happy riding!
Hi Yoram, thank you for the video. Could you please specify which Ninja BB did you choose? I found this one wich sounds correct: Ninja PF30 BB 30mm? I hope to use it with my old 30mm spindle and crank. Thanks
Assuming you want to keep the existing crankset.
You need a MTN 83-Ai FRAME (46 x W83) with CANNONDALE HOLLOWGRAM MTB CRANKSET (with 137mm SPINDLE), it is compatible with Token TF4630 + M83.
Looking back, it was an opportunity to change to a standard crankset that opens a larger variety of products. But then you also need to invest in a new crankset, that I wanted to avoid at the time.
@@YoramPomer thank you for your reply, much appreciated! I hope you will make another video if you decide to change your crankset for another brand, because this whole crank arm AI offset on the f-si gives me headaches. I am running a hollowgram crankset (si/one, ck141...) on a 137mm spindle with a spider for a 2x11 drivetrain. I was planning to switch to 1x12 or 1x11 but could not figure out which crankset or sprocket would work. Is yours basically the same as mine but instead of the spider you run an oval chainring? And if, which one :) Thanks again!
@@lukasn.9399 AI is great, but is also a headache because it’s non standard. I moved to 1x11, which is so smooth. A 1-12 would have been a big investment that I couldn’t afford. The oval chainring that I am using is made especially for AI. And you should keep it this way or else the chain will keep falling. I can highly recommend the one I am using. It’s expensive, but also fun . absoluteblack.cc/cannondale-oval-direct-mount-chainring.html
Hi@@YoramPomer , thanks again for the information. the ring looks awesome. I will consider 1x12 for the next rebuild some time in the future :) This time I found the original replacement chainrings in an italian online store after searching the web for a week and talking to fsa in the USA.I have also ordered the token ninja form a polish online shop (token distributor). Very helpful seller. Happy riding!