How to make a treadmill - DIY Curved Treadmill
HTML-код
- Опубликовано: 9 мар 2021
- In this video you can learn how to make a treadmill for running. this homemade treadmill is curved in shape. The main feature of curved treadmill is to self regulate the motion with every foot drag. this curved treadmill is best suited for fast running.
Хобби
This person's head and hands work very well. 👍
У этого человека, голова и руки работают очень хорошо. 👍
That's incredible creativity & craftsmanship. Standing Ovation!!! 👏👏👏👏👏 👍😎
It’s nice.. I’m admired with the engineering that you used on it. Pretty cool 👍
NOTE: This product works exactly as described. ruclips.net/user/postUgkxguEIMc_Qwab-3QMTpF6jaRL80hiOOsIN It originally earned a four-star review due to a minor defect (see below). However, the manufacturer's customer service rep (Lita) went above and beyond the call of duty and deserves five stars now. I wish I could give even more!I purchased this item which arrived quickly. Assembly instructions were easy to follow. There was only one problem: One bolt did not screw into the hole properly. I called the company. Their customer service rep (Lita) was terrific! She took all my information and submitted a request to replace the defective part. I'm hoping to finish assembly and start using this treadmill soon. (Fingers crossed...)FOLLOW UP: Lita called back to inform me that the company will send a replacement part AND a technician(!!) to install it properly. AMAZING CUSTOMER SERVICE!! Thank you!!
That was impressive. I didn't see that offered on Amazon when I bought my wife's treadmill.
🤣
Anyone that needs a threadmill to run on when all you need to do is go outside is just lazy to begin with
@@theworkethic I guess some people are too stupid to know that sometimes it's too cold to go outside and run or walk.
@@skipmars7979 It’s never too cold to run and walk. Stop making excuses for laziness.
@@theworkethic clown
Well done. I too have built a treadmill, albeit I chose to forgo the curve as making a retention system to stop the belt from popping up would have increased overall complexity and size. Since your treadmill is smaller, it's not much of an issue at lower speeds, but you can see it happening in the running example at the rear.
On your guide roller, you chose to lock the nuts together with two nuts via jam nut method. You should do the same for all the bearings, as the nuts will work themselves loose after repeated sessions if only using one nut. They fell off on my first attempt before switching to the jam nut method as well.
I commend you on the use of plywood. Mine was made with dimensional lumber, and that was a problem that requires much more preparation before construction to avoid alignment issues.
I will borrow some ideas from your build in my next iteration, whenever that may be.
Nice job.
Felicidades...gran trabajo y creatividad..🇨🇱 saludos
Nice job, though I think straight planks would be stronger to make the belt pieces than plywood. Then you have all the grain in the strong direction.
That’s awesome work!
Good job dude good job. You don't have to give your ideas away for free but you did, and I thank you for sharing. God be with you.
god Bless you bro the way you have explained 👍👍👍👍👍
lotsss of blessing and praises from india🙏
Creativity at its finest💯
Basic idea is great spurs me on to design my own for the dog to run on when I can't be bothered with walking..well done sir first class!
Собака на такой конструкции пораниться может!
👏👏👏👏👏 muito inteligente! Parabéns
I've been thinking to buy this tool for a long time, But now I will make it myself, thankyou for showing your skill🎉
Gracias felicitaciones y siempre adelante
Как в нашей народной Думе. Всё молча обрубил. ошкурил, просверлил
и проголосовал. Нажал на подшипники, затем просчитал количество
и утвердил без регламента.Получилась прекрасная деревянная беговая
дорожка
типа "беличье колесо"! Опробовал, без разгона и всего то!!!
Спасибо за показанное.
Это лучшее , что я видела !!!!!!!!!!
That’s genius! Create a plan and sell it! 👌 it looks like it would need some adjustments in the tightness of the roll as it was loosening in the back and it looked wobbly but still genius! Looking forward to a version 2.0🔥
Amazing work. Can you please tell what the small wood strips size to make the running belt? Also, what is the arc measurement of the frame?
Damm bro ur a str8 BEEAASSST! ND a Genius! Ur like the BEAST from X-men! Thank u for sharing ur at work!
КЛАСС!!! 🤩👍Только спереди и сзади обязательно нужно фанеру внизу прикрутить к боковинам, на которых ролики (примерно на половину высоты), это придаст жёсткости. А то "гуляет" влево-вправо, того и гляди развалится.
This is awesome!
Talk about talented!! You did an awesome job!!!
I wish you could make me one of these!!!!
شكرا جزيلا على الفكرة برافووووووو من الجزائر
Impressive build
sir you are amazing!
Muito bom !!!
Genius!
A excellent start, with more sturdier materials and maybe joining the bearings in the middle with piping. But well done 👏
You genius lad 💪💪💪
Buena día gracias por enseña
I would have used screws instead of just staples to fasten the nylon belt. What if they come off while you're doing top speed? Otherwise, thanks for posting this great video.
Felicitacionesss !!
I don't know dude. This is awesome. Really.
But I don't wanna waking up the entire house when I'm running on that treadmill.
Then pop to Peloton and cough up $3000
@@MrJamesdavies085 so either wooden treadmill or expensive and suffocating subscription workout service?
Excellent work, my friend! Fantastic idea!!! 😃
Stay safe there with your family! 🖖😊
Thanks
Holy f...I mean that's totally awesome!!!!👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏
Отлично получилось! только основание должно быть ещё более жёстким, необходимо его усилить.
good job !!!!!
wow!
Your ingenuity is impressive 👏👍
Amazing work 👌🏻 💯 👏
Really well done and a great idea. I wonder if you've thought about adding some incline and resistance? I did notice the base a little wobbly during use maybe a few more supports here and there are needed. Great job I wonder what the cost was.
Wonderful job my friend! I tried to make a treadmill for dog years ago and the craftsmanship was no where near yours.
Классная работа
جميله اوي اوي اوي
You are a genius
Good craftsmanship right there bro
Fantastique!!
Спереди и сзади установить перемычки,что бы устранить шаткость.Продумать небольшой элемент натяжения ролла и сам ролл покрыть 3,4 мм резиной.
Excellent💯👍👏
Super good work
F'n awesome.👍🔥🔥🔥
Excellent
Good job
Genius.
Super cool 😎
Other than it needs more stabilization, awesome job.
can you do verticl stair for training legs and arm?
love this build, but the open toed shoes Stressed Me Out
Project is great. Just wondering, 160 lbs x 45 mins? x 3 times a week...
Very nice idea 👍👍👍
ouaaaauou nice job
amazing
Good ! economic
Kea aap order pe ban sakte hen
Foi bom video, mas esse barulho nao diminui ?
Impressive! Ours in more comfortable though! You are an engineer my friend.
it's very good to make a wooden treadmill for myselt.
muy efectivo para los que vibimos aislados de las ciudades.á
Great job presenting it. How noisy is it?
perfection is the enemy of good enough
Nice
En cuanto a la biomecánica deja mucho que desear y la seguridad también, pero es algo interesante para haberse hecho con esos materiales, felicidades por tu trabajo.
А какие размеры подшипников вы брали?
yes, but how long before you wear out?
Excellent
5 star
Thanks.
Quero fazer
Where we can find that nylon belt !
est-ce que vous pouvez nous donner les dimensions de tout le matériel utilisé? Merci
Great work, just wondering how much did you spend on material? And how long did it take?
Keren bang saya coba bikin
Dada yahi machine ka readymade khota pabo
woww
Man this is incredible
I want to purchase it
Kaha se ho aap
Will you please make for buyers
All right, I´m completely sold. How much?
Can you list all the measurements?
Just run outside, stop looking for pet projects. No one serious about running is going to use this garbage that made a cool RUclips idea.
Wow
wow
Where available
Agr ye ap se bnwana chahy to ap kitny ki bna kr dyngyy
Bearing ka rate bata do kya costly hai?
Mejor la compro, es un desmadre hacerla.
Can I buy 1 unassembled?
Cost of making this treadmill??
Looks safe...
Total price