How to reverse your fridge door | by Indesit

If you find that you are having trouble reversing your fridge door, you
should always refer to your fridge manual.
To download manuals for all models of Indesit fridge freezer, or to book you local Indesit engineer, visit indesitservice.co.uk

[@annettemaxted1898]

Is the middle hinge reversible? It has a lip, but I can't find a Left/Right hand one.

[@PhyllisGlassup2TheBrim]

My bottom hinge is nothing like that and that's what I'm having trouble with .

[@TheScramble8]

Fantastic thanks

[@kaidlookmanji8286]

hi very well explain
i have bought an Indesit standing freezer
model U18FLCWUK1
Its used frezer ex UK stock
its working fine
but there is a continues Alarm Ringing
can you please advise me how to stop that irritating sound of alarm
thank you very much

[@WhCrsOrochi]

I desparetely need taan 6 fnf s series’ service manual. How can I get that?

[@mohammeddilshadkottayil2259]

My fridge is on and light is there but not cooling both side . What is that??

[@trampster7306]

Freezer door had to be reversed. No too bad a job, except the door seals didn't seal and a lot of jiggery was needed to get it to line up right. (I haven't the time to watch the video). Little trick that is not well known - if you have to reverse a fridge or freezer door, use a thin slip of paper between the door and the case - if the seal doesn't grip the paper, it's not sealing. To fix that, GENTLY work around & heat the seal with a heat gun or hair dryer, which makes it more flexible so as the magnetic effect can pull it towards the case. Check your appliance door seals are actually sealing correctly on a regular basis.

[@TravelStyleNews]

INDESIT IBD5517S 50/50 Fridge Freezer - Silver, Looks great, but regret the perches,
1: Makes a crying sound, We were told its normal
2: Its not normal, ( Iv Developed and managed 600+ apartments over the years)
3: Customer service is just a brick wall to stop any further action.
4: They tell you that if the engineer cannot fix or is not fault they will charge you 58 pounds!
5: This is wrong and probably scares off vulnerable or older couples on a tight budget.
6: 10 year warranty on parts, but was told that 174 pound an hour for labor, Cost 229 New)
7: finish quality is low, joints do not line up. (Like Its Been Dropped)
I will do a video review so you can see and heard.

[@annaw7437]

If only it was that easy.... 😒😫