Another hard day in the field Warren always interesting watching you work and a verity of machinery coveralls I use to wash mine in a cement mixer outside the workshop did a great job thanks for sharing
Your a sheer animal with that tyre, absolute beast. Getting ‘er done, no matter what. I don’t see this often, men wanting to get it done, earn the money they are paid and finish the job. You’d get 6 months full pay on sick after that job where I work, then reduced duties upon return and all your leave.
I am in pain just watching you man handle the tire. Had a tractor tire in me once it was not plesent scraped down The Who.e front of my legs in order to free myself. LESSON LEARNED! Used a tree branch and a chain hoist from then on . I did not have a truck hoist! I assume you did?
Christ Warren I thought you lost that tire a few times. Wrastling those big tires will give you a hemorrhoid or a hurt back real quick. Might aughta bring that big Son of yours back to help put that SOB back together. I'd like to see that spindle thread chaser your taking about. And your right about fighting bolts and rounding them off from prior knob headed goobers with a one inch impact set on hammer. Great video Sir and as always I sure enjoy them all.
I have worked on many of those old skidders and don't miss it. I love those final drives cause i got the bronze pins out of the sun and planetary gears and man I found a lot of uses for them. Really enjoy your videos Warren!
by the way.. back at the shop.. how about a drywall panel hoist.. if you can come up with a HF or a used one to hoist lighting on not just for videos but to make it easier to work.. putting lamps on at different ends so you reduce shadows.. just a thought..
I took my dog out to the shop so she could hang with me and the air compressor turned on and scared her, now she wont even go near the door anymore! Guess she's not used to loud noises! Luckily, I have a fence up around the shop so she can't get far!! Your dogs seem so calm and contented, are they all like that?
Good job, must be bright out there. Think that's the first time I've seen you wearing Sunglasses. Take care out there, injuring your back can put you out of action for months if not permanently.
Warren you should be using the crane on those heavy things, being out there by yourself is bad enough but to injure your back or drop something on yourself you could be in real trouble getting help so please use the crane
What in the hell happened to your britches son ? Lol! That old girl been run hard and put away wet! There about a $2000 dollar parts list ! Thanks for sharing bud 👍
Could just pull axle shaft, unbolt spindle assembly from axle housing & crane off planetary assembly in one piece. Would find good used outer assembly.
Warren how you keep from wrenching your back all out of whack is beyond me!............That's a lot of weight for one man to be trying to throw around.
That ain't going to be cheap from CAT! Good job did not wreck the spindle. Much chance of picking up a used spare? The locking place on the nut must of allowed it to come loose? Trouble with job like this is by the time the operator notices there's a problem it already too late and the damage is done. Good job he did not press on and try to keep running it! We had one do just that on a JCB loader and the damage was severe. " been like that a few days". That cost him big!
Do you have any Sickle-Back Wrenches? They're great for rounded off nuts & bolts if you have room to use them. I'm not sure if they still make them, mine are from my Grandfather. You might have to hunt the flea mkt's or the internet. Everyone laughs when I pull out the old Sickle-back, or the 36" Chain Pipe Wrench. But they don't laugh when they see how well they work.
Maybe you aren't as old as me, but I don't muscle those tires/wheels anymore. A pair of 8' loop straps and crane them off, and back. Lots easier on the back.
Make yourself a clamp or something to grip those big wheels so you can crane them. Time well spent and you will not run the risk of wrecking your lower back. Once it's broke it's broke and you'll have all the time in the world.
I just want to say i hate people that complain about video quality editing or what ever it is.. Just be thankfull people are willing to make these. And if you dont like it turn it off and shut up
So, If I had to wear coveralls all day in hot weather, I'd probably just wear my undies and a tee underneath to try to keep cool. I'm glad you didn't do that today.
I see you are not the type of man who gives up on a garment just because of a few missing stitches.. Nothing a few stitches and a little time won't fix....... Pick up with your knees and not your back. Those 518's are some tough machines. They have a lot of power for a four cylinder machine. I know it is time consuming to use the crane but I would hate to see a video where you were hurt lifting something............
damn thought you got rid of the 2 trolls last video didn't see any thumbs down lol they must have been on vacation. wrestling tires is a bitch my old man got a free life line helicopter ride and 3 months in icu in 2010 after 46" dual on 8320 deere fel off forklift on him broke all his ribs punchured his lungs and then he got staff infection while on ventilator in hospital being a mechanic every time I remove any big tire now I remember waiting for that chopper to land waiting for him to die it doesn't ever leave ur memory first rhing I bought was ez dual changer it would work great with ur crane look it up sometime
western truck and tractor repair What's worse is having to stick around because I gotta sign for the package! Damn just leave it at the fucken door! I got shit to do
western truck and tractor repair And you cant just pop on UPS and click, "leave it at the door". And it never fails that a family member cant stick around the house for me. So I leave work early because I dont know when gomer pile is gonna show up at the door for me to sign, which means I've lost money for the week, and frustrated to top it off. What can brown do for you? Leave it at the door.
ya electric vehicles have a long way to go to get to this kind of work and abuse give it to me and il test an electric truck and treat like this service truck real world usage in the bush hydraulic oil all over skidder parts all over heavy and baging around massive tire chains in the box for forestry tires ya well see...i dare dodge chevy and ford to test them like this until then i dont believe they can ever do what a truck is designed to do all heavy duty stuff around period. one more thing what about minus 40 below with electric trucks.....ya i dont think so.diesel will be around for ever.
Shawn Cooper You know , that skidder wasn't the only job I did toda, I put in 17 hours , and then came home and edited and uploaded a video ate dinner and took a shower and finally laid down just to see you leave a comment running me down . I put the camera on my hat so I am not constantly moving the camera to the perfect position because I don't have time due to being extremely busy . So sorry for making videos trying to help people out by showing them how to repair some of their own equipment after busting my ass all day .
I do apologize as I know your a busy man. Please disregard my comment. I guess I’m used to content from guys who have more time on there hands with editing as I know it’s a time consuming second job. Sincere apologies
His videos are fine. If you don't like then don't watch. I've been a diesel mechanic for 10 years now and it would be hard as hell to film perfectly. So just shut the hell,up.
Real world video's. One of my favorite channel's on RUclips.
Stihl 090 your spot on this guy clearly does this for fun he should have more subscribers great long videos
Never imagined one little guy would be wrestling a tire that size , props, kudos you are one badassed fella.
Another hard day in the field Warren always interesting watching you work and a verity of machinery
coveralls I use to wash mine in a cement mixer outside the workshop did a great job thanks for sharing
Your a sheer animal with that tyre, absolute beast. Getting ‘er done, no matter what. I don’t see this often, men wanting to get it done, earn the money they are paid and finish the job. You’d get 6 months full pay on sick after that job where I work, then reduced duties upon return and all your leave.
Those coveralls look like they suffered a burrito night gas explosion. :)
I sure enjoy your videos. Your work ethic is inspiring.
Thanks for watching
My favorite channel. Keep em' coming!
Can you imagine the torque that it took to bust that hub. That axle was a beast !!
Warren I just love your videos you are a great mechanic 😉!!!!
Thanks for watching Tim .
I see it’s leg and back day at the gym. Unfortunately the service truck is the last to get serviced let alone washed. Thank you for the videos
24:33 you missed your pocket with the rag, you find it at your boot..hahahah
I am in pain just watching you man handle the tire. Had a tractor tire in me once it was not plesent scraped down The Who.e front of my legs in order to free myself. LESSON LEARNED! Used a tree branch and a chain hoist from then on . I did not have a truck hoist! I assume you did?
Love the backside power booster vent in those coveralls
Christ Warren I thought you lost that tire a few times. Wrastling those big tires will give you a hemorrhoid or a hurt back real quick. Might aughta bring that big Son of yours back to help put that SOB back together. I'd like to see that spindle thread chaser your taking about. And your right about fighting bolts and rounding them off from prior knob headed goobers with a one inch impact set on hammer. Great video Sir and as always I sure enjoy them all.
I have worked on many of those old skidders and don't miss it. I love those final drives cause i got the bronze pins out of the sun and planetary gears and man I found a lot of uses for them. Really enjoy your videos Warren!
Excellent As always You are my favorite channel
Just kicking ass Warren!
A hook on the end of that crane sure would help with removing those tires. Those things look heavy
Overall air conditioning . Sounds fancier. Good on you for the 10K sub's
Noddy 4000 Hey thanks!
THATS A SMART DOG ,IN THE SHADE UNDER THE TRACTOR.
10,000 subscribers! Way to go!
Great video, greatz on 10k.
Just about time for a new suit there mate haha
great stuff Warren
Robert S Thank you
Hey Warren can you show us that spindle turning tool you mentioned. I had about the same scenario with damaged threads on a skidder spindle.
MaxxTech85 I'll get it out on the next upload .
How much is them parts going to cost ????
by the way.. back at the shop.. how about a drywall panel hoist.. if you can come up with a HF or a used one to hoist lighting on not just for videos but to make it easier to work.. putting lamps on at different ends so you reduce shadows.. just a thought..
I took my dog out to the shop so she could hang with me and the air compressor turned on and scared her, now she wont even go near the door anymore! Guess she's not used to loud noises! Luckily, I have a fence up around the shop so she can't get far!! Your dogs seem so calm and contented, are they all like that?
Love the channel Warren,what part of California you located,looks like great country,thanks
Macdoel Ca. Thanks for watching
Good job, must be bright out there. Think that's the first time I've seen you wearing Sunglasses. Take care out there, injuring your back can put you out of action for months if not permanently.
Good job👍
Are you going Commando in those coveralls?
How far did you travel for this job
"there's always one bolt that gives you trouble " . Is that a Murphy's Law ? Sounds a like one .
Warren you should be using the crane on those heavy things, being out there by yourself is bad enough but to injure your back or drop something on yourself you could be in real trouble getting help so please use the crane
Annette Butcher I was thinking that myself. Needs to bring his Son back with him when he puts it back together
Just love your vids man. Is the vent in the overalls thermostatically controlled or manual operation?
What in the hell happened to your britches son ? Lol! That old girl been run hard and put away wet! There about a $2000 dollar parts list ! Thanks for sharing bud 👍
Warren, I think you got your money out of them coveralls!
Tim Stanford we can make a shirt and pair of pants out of them lol !
The left dozer cylinder rod appears to be bent.
Man get crane on truck to work for you you can get been herth bad .work safe . congrats .on the 10k .your a very hard worker .
leo l Thanks
Good job
Could just pull axle shaft, unbolt spindle assembly from axle housing & crane off planetary assembly in one piece. Would find good used outer assembly.
Paul Harper That wouldn't be a good video lol ! They wanted to know what was wrong so I disassembled it .
Warren how you keep from wrenching your back all out of whack is beyond me!............That's a lot of weight for one man to be trying to throw around.
That ain't going to be cheap from CAT! Good job did not wreck the spindle. Much chance of picking up a used spare? The locking place on the nut must of allowed it to come loose? Trouble with job like this is by the time the operator notices there's a problem it already too late and the damage is done. Good job he did not press on and try to keep running it! We had one do just that on a JCB loader and the damage was severe. " been like that a few days". That cost him big!
Do you have any Sickle-Back Wrenches? They're great for rounded off nuts & bolts if you have room to use them. I'm not sure if they still make them, mine are from my Grandfather. You might have to hunt the flea mkt's or the internet. Everyone laughs when I pull out the old Sickle-back, or the 36" Chain Pipe Wrench. But they don't laugh when they see how well they work.
Santa needs to bring you some new coveralls
they look "gansta"
We run 3 here in Louisiana they ain’t new but there payed for and goes we’re others can’t , I’m the 3rd generation on em at 22
Maybe you aren't as old as me, but I don't muscle those tires/wheels anymore. A pair of 8' loop straps and crane them off, and back. Lots easier on the back.
Warren does your son work in the mechanical field ?
Ron Hart No , he is not really , he is just helping out till he goes to school for firefighters and paramedics.
Make yourself a clamp or something to grip those big wheels so you can crane them. Time well spent and you will not run the risk of wrecking your lower back. Once it's broke it's broke and you'll have all the time in the world.
Sir it's big Dan watch your back I use to pickup over 340lbs 25years latter 25lbs is to much watch your back its the tool that can retire you
Love. Videos
I just want to say i hate people that complain about video quality editing or what ever it is.. Just be thankfull people are willing to make these. And if you dont like it turn it off and shut up
Have to sew those coveralls up some
Pull your britches up. Lol.
"Air conditioned coveralls"
So, If I had to wear coveralls all day in hot weather, I'd probably just wear my undies and a tee underneath to try to keep cool. I'm glad you didn't do that today.
you would think with 10,000 subs someone would send you some new overalls . lol
You know your shit man 👌
I see you are not the type of man who gives up on a garment just because of a few missing stitches.. Nothing a few stitches and a little time won't fix....... Pick up with your knees and not your back. Those 518's are some tough machines. They have a lot of power for a four cylinder machine. I know it is time consuming to use the crane but I would hate to see a video where you were hurt lifting something............
Johnny Holland I'm always in a hurry.
Johnny Holland they are gutsy SOBs. The last models (518c) were 145 horsepower
damn thought you got rid of the 2 trolls last video didn't see any thumbs down lol they must have been on vacation. wrestling tires is a bitch my old man got a free life line helicopter ride and 3 months in icu in 2010 after 46" dual on 8320 deere fel off forklift on him broke all his ribs punchured his lungs and then he got staff infection while on ventilator in hospital being a mechanic every time I remove any big tire now I remember waiting for that chopper to land waiting for him to die it doesn't ever leave ur memory first rhing I bought was ez dual changer it would work great with ur crane look it up sometime
Oh Yeah , every once in awhile the 2 trolls leave me be lol ! I will look that up . Good to hear from you .
I believe on a job like that it should be brought to the shop.
Yep that sucks hard...Ben there done that.. So after all these years. That's why I always Antisneez all fasteners. for the next guy...
I swear I'm the last person on the UPS drivers route.
Me too .
western truck and tractor repair
What's worse is having to stick around because I gotta sign for the package! Damn just leave it at the fucken door!
I got shit to do
FredFlintstone21 isn't that a good way to fuck your whole day up ?
western truck and tractor repair
And you cant just pop on UPS and click, "leave it at the door". And it never fails that a family member cant stick around the house for me. So I leave work early because I dont know when gomer pile is gonna show up at the door for me to sign, which means I've lost money for the week, and frustrated to top it off. What can brown do for you? Leave it at the door.
Hahahahahha thinknits time to junk those overalls! Hahahahahhahahhahah
Your coveralls need some duct tape, no time for sewing. Lol
You need some new coverall and you have sunglasses on - never seen that before
ya electric vehicles have a long way to go to get to this kind of work and abuse give it to me and il test an electric truck and treat like this service truck real world usage in the bush hydraulic oil all over skidder parts all over heavy and baging around massive tire chains in the box for forestry tires ya well see...i dare dodge chevy and ford to test them like this until then i dont believe they can ever do what a truck is designed to do all heavy duty stuff around period. one more thing what about minus 40 below with electric trucks.....ya i dont think so.diesel will be around for ever.
Though your content seems good, your video quality lacks. I’ve watched a few of your vids, this one was definitely less dizzy
Shawn Cooper You know , that skidder wasn't the only job I did toda, I put in 17 hours , and then came home and edited and uploaded a video ate dinner and took a shower and finally laid down just to see you leave a comment running me down . I put the camera on my hat so I am not constantly moving the camera to the perfect position because I don't have time due to being extremely busy . So sorry for making videos trying to help people out by showing them how to repair some of their own equipment after busting my ass all day .
I do apologize as I know your a busy man. Please disregard my comment. I guess I’m used to content from guys who have more time on there hands with editing as I know it’s a time consuming second job. Sincere apologies
His videos are fine. If you don't like then don't watch. I've been a diesel mechanic for 10 years now and it would be hard as hell to film perfectly. So just shut the hell,up.
No worries , sorry its been a rough day . Take care .
I apologize for my comment, and will continue to watch his content as it’s informative and interesting in his trained field