hi, sorry for late response if the purpose is just to let the egg safely landed then suggestion for you is instead of attaching the parachute to the cover, you can stick the parachute directly to the egg
Thank you so much, Im currently working on a model rocket experiment for my physics paper and this parachute mechanism really helped me out, amazing video
Hi @Theoxd32 For a water rocket, the propulsion system typically consists of a combination of water and compressed air. The lift-off of the water rocket is entirely dependent on the pressure built up inside the bottle and the mass of the water being expelled. The more pressure and the more water, the greater the potential thrust and the higher the rocket can go, up to the point where the structural integrity of the bottle might be compromised by too much pressure. Safety is paramount when launching water rockets. It's important to use bottles that are rated for high pressure, to not exceed the recommended pressure limits, and to always point the rocket in a safe direction away from people, animals, and property. you can refer to the following link for the water rocket launcher ruclips.net/video/yZLANdCIOdg/видео.html
Hello, i have a question. To make the nose come off so that the parachute can deploy, you said to make the nose smaller. So if i use a smaller nose, will it come off when its flying? Meaning before the rocket reaches its maximum height, the nose already dropped. Will it happen? And if yes how to prevent it? Thank you ❤
Hi @mahax9660 Yes, if the nose cone is too small, it may drop off before the rocket reaches its maximum height. BUT, if the nose cone attached on the body of the rocket is placed properly and you launched it vertically, it should be able to reach maximum height.
@@yokesimchan8328 for the current design it is not suitable to put an egg to the water rocket. If you are only considering the egg can land safely, then you can attach the egg directly to the parachute. Or I can suggest you extend the length of the rocket, for example add one more compartment between the cap and the body, your egg can be put inside this new compartment. Besides, you can consider adding any necessary protections to the new compartment if allowed.
Hi Alya, Terminal velocity is the speed at which the weight of the falling object is equal to the upward drag force caused by air resistance, causing the falling object to fall at a constant speed.
To get maximum height, it depends on the pressure and amount of water that we applied. However, for safety reasons, I never applied very high pressure to launch the water rocket. Whatever, to get 30 to 50 metres is not an issue.
You should know what your purpose is and what weight you are referring to? Overall weight of the water rocket? Or the weight of the water fill in to the bottle?
@@simplegoeasy8236 sorry, you know how some of these projects include an egg so you will need to have a place to hold the egg and also keep the egg safe when you launch the rocket
@@minanovak9308 I can suggest you extend the length of the rocket, for example add one more compartment between the cap and the body, your egg can be put inside this new compartment.
Hi @BaladeviDevi-m2q If you want to build up the water rocket, you need the following materials: 1 x Corrugated Plastic Board 1 x modeling Clay 2 x 1.5L Soda Bottle 2 x Cloth Tape 1 x Manila Rope the details of the steps can be obtained from the following link: ruclips.net/video/ynLBrje92o8/видео.html if you want to build your own water rocket launcher, you can refer to the following link: ruclips.net/video/yZLANdCIOdg/видео.html if you want to include the parachute on your rocket, you need following materials: 1 x Garbage bag (suggested bigger is better) 1 x Nylon Twine 2 x Rubberband 1 x Postman rubber band 1 x Retractable ruler 1 x Paper punch 1 x Scotch tape (suggested cloth tape is better) 1 x Flexible straw 1 x Scissor 2 x Nails which you can find in the current video
Hi @AlexSanchez I can suggest you extend the length of the rocket, for example add one more compartment between the cap and the body, your egg can be put inside this new compartment.
all the materials are replaceable, you can use what ever similar materials that you have to instead. Furthermore, all the materials that I have used also can get them in the shops, for example DIY or stationary shop. The prices also very cheap. ^^
Hi @nurqaseh6212 If you're wondering if a rocket will land within 50-100 meters of where it was launched, the answer is yes,, unless it's flying high and facing strong winds. Thank you. 😊
Yesss! I tried this idea it worked so well! Thank you so much such a fun thing to do!
That is great it helps you.
Don't mention it. 😁
Thx this helped me so much for my physics project tysm
Glad it helped! ^^
lol I'm doing it rn
what would you do if you wanted to attach an egg to it? Because my project says to land the egg safely using a water bottle rocket with a parachute.
hi, sorry for late response
if the purpose is just to let the egg safely landed then suggestion for you is instead of attaching the parachute to the cover, you can stick the parachute directly to the egg
Thank you so much, Im currently working on a model rocket experiment for my physics paper and this parachute mechanism really helped me out, amazing video
Glad I could help! ^^
Thank you sir it's very helpfull to my school project 🎉🎉
I am glad to hear that this video is very helpful for your school project. 😊.
THANKS FOR THE INFORMATION!!!!
You are most welcome 🤗
Wow, this video is insane, thank you. You deverse so much, words cannot explain.
That is so glad to hear it.
Thank you very much. ^^
Great Video!, What did you use for propulsion? How did you make the rocket lift off the ground?
Hi @Theoxd32
For a water rocket, the propulsion system typically consists of a combination of water and compressed air.
The lift-off of the water rocket is entirely dependent on the pressure built up inside the bottle and the mass of the water being expelled. The more pressure and the more water, the greater the potential thrust and the higher the rocket can go, up to the point where the structural integrity of the bottle might be compromised by too much pressure.
Safety is paramount when launching water rockets. It's important to use bottles that are rated for high pressure, to not exceed the recommended pressure limits, and to always point the rocket in a safe direction away from people, animals, and property.
you can refer to the following link for the water rocket launcher
ruclips.net/video/yZLANdCIOdg/видео.html
Hello, i have a question. To make the nose come off so that the parachute can deploy, you said to make the nose smaller. So if i use a smaller nose, will it come off when its flying? Meaning before the rocket reaches its maximum height, the nose already dropped. Will it happen? And if yes how to prevent it? Thank you ❤
Hi @mahax9660
Yes, if the nose cone is too small, it may drop off before the rocket reaches its maximum height. BUT, if the nose cone attached on the body of the rocket is placed properly and you launched it vertically, it should be able to reach maximum height.
Hi sir. May I know, how many inches of nylon twine that you use to make the parachute?
good questions, the length needed you can base on the diameter of the parachute that you have cut. ^^
@@simplegoeasy8236 All right, thank you so much for the fast response 😀
@@lailakhalilah8510 you are most welcome 😊
thx to you that i'm sure that i will win this rocket competition at my schooll❤
Glad to hear that 😊
I wish you all the best and have fun on it.
Thanks so much for explanation.can I know if need put the egg where should I put
@@yokesimchan8328 for the current design it is not suitable to put an egg to the water rocket. If you are only considering the egg can land safely, then you can attach the egg directly to the parachute.
Or I can suggest you extend the length of the rocket, for example add one more compartment between the cap and the body, your egg can be put inside this new compartment. Besides, you can consider adding any necessary protections to the new compartment if allowed.
@@simplegoeasy8236 the competition the requirement need us to put the egg inside..
@@yokesimchan8328 then you can consider to use the second method suggested above. The new compartment can put more than one egg if you want to. 😊
this bring me to the uocoming project to play around with my son. thanks
You are most welcome 🤗
Enjoy it with your son. 😁
hello. may i ask for a clearer explaination of terminal velocity? couldn’t quite catch up with the explaination. thank you
Hi Alya,
Terminal velocity is the speed at which the weight of the falling object is equal to the upward drag force caused by air resistance, causing the falling object to fall at a constant speed.
@@simplegoeasy8236 thank you very much
@@alya2067 you are most welcome 🤗
Hi sir, may I know what's the function of the flexible straw, is it necessary? 6:25
Hi @jessicapua3527
The flexible straw is used to protect the rubber band, because the punched hole may be sharp.
@@simplegoeasy8236 Thank you
My pleasure @@jessicapua3527
Tysm I had a physics assignment about this and this helped me so much Ty again!❤😁
That is glad it helped you 😁
Thanks sir...really helpful...clear explanation..
You are welcome and that is glad to hear that it helped you ^^
It is amazing 😮
@suji341
That is glad to hear it from you.
Thank you ^^.
Cool video because I'm struggling how to make a Parachute and how to detach nose cone on the rocket
I am glad, this video helps you to solve your technical issues 😊
It workedd!!!!! Thankkyouuu ❤❤
@very35 I am delighted to hear that was helpful.
Will use this for my water rocket competitions😊
@@AHMADAFIFBINMOHDIZWANMoe glad to hear that this video can help you in your competition. 😊
Even actually for me
@@simplegoeasy8236 YESSS I WIN THE COMPETITION
Congratulations 🎉@@AHMADAFIFBINMOHDIZWANMoe
I would like to ask what is its maximum flight altitude?
To get maximum height, it depends on the pressure and amount of water that we applied. However, for safety reasons, I never applied very high pressure to launch the water rocket.
Whatever, to get 30 to 50 metres is not an issue.
if the water rocket do not have parachute,does it affect the speed?
Yes.
Great tutorial Dr Tan 🥳🥳
Glad to hear that from you, thanks.
Wish you get some ideas to build your own parachute 😉
This tutorial I like 👍🏻👍🏻😂
Glad to hear that from you 😊
Im trying this at school later at 26 july!! Yippiee❤
Hi, @Zalfareyyshaz
Sound great. That is tomorrow. Enjoy it. ☺️
how was your water rocket project? having fun? ^^
So wonderful🎉
Thank you @nurenspears 😊
Wow sir👍🏼👍🏼👍🏼
Thanks for your support o 😘
How long is the string?
It depends on the diameter,d of your parachute. Usually is 1.5d of the parachute.
Great video !
Glad you enjoyed it
Woah sir 🤩👍🏻
wish this video can bring you some ideas ^^
Its my school project
@@PriyangikaPriya I wish this video can help you with your project 😊
me too
@@gabrosario enjoy it 😊
anjaii thanks bro😎🙏
You saved me dude, thank you so much 🙏
😂, you are most welcome 😁
How much weight can it carry ??
You should know what your purpose is and what weight you are referring to? Overall weight of the water rocket? Or the weight of the water fill in to the bottle?
@@simplegoeasy8236what is the weight of your bottle shown in the video?
Can you do another video for the egg to be there
Please be more specified 😉
@@simplegoeasy8236 sorry, you know how some of these projects include an egg so you will need to have a place to hold the egg and also keep the egg safe when you launch the rocket
@@minanovak9308 I can suggest you extend the length of the rocket, for example add one more compartment between the cap and the body, your egg can be put inside this new compartment.
It didn't work but Grant Thompson's parachute worked
Cool
@@jeanpasquinelli4739 Thank you ^^
すげ〜！！！！！
どうもありがとうございます
How to do it more fast?
Hi @JLGoh
Please be specified 'more fast" in terms of?
I love you❤❤❤❤
Thank you 😊
well done bro ! thx
Thank you bro and you are welcome 🤗
Woah! This is so skibidi and sigma, our skibidi teacher sent me to this fanum tax epic video🗿🗿🗿 (don't mind this, it's just a joke HAHAAHHAHAHA)
😂
thx, I'm currently making a water rocket for a water rocket competition
Wow, great.
I wish you all the best for your competition. ^^
Please tell me the things for rocket
Hi @BaladeviDevi-m2q
If you want to build up the water rocket, you need the following materials:
1 x Corrugated Plastic Board
1 x modeling Clay
2 x 1.5L Soda Bottle
2 x Cloth Tape
1 x Manila Rope
the details of the steps can be obtained from the following link: ruclips.net/video/ynLBrje92o8/видео.html
if you want to build your own water rocket launcher, you can refer to the following link:
ruclips.net/video/yZLANdCIOdg/видео.html
if you want to include the parachute on your rocket, you need following materials:
1 x Garbage bag (suggested bigger is better)
1 x Nylon Twine
2 x Rubberband
1 x Postman rubber band
1 x Retractable ruler
1 x Paper punch
1 x Scotch tape (suggested cloth tape is better)
1 x Flexible straw
1 x Scissor
2 x Nails
which you can find in the current video
How long the trade?
Hi, it depends on the diameter of your parachute. Usually we will take 1.5 times the diameter of the parachute. ^^
👍
Can I buy the rocket off you??
Why not try to build it yourself first 😁
Hi, how I can make my own motor for rocket
Hi Yu Lu,
Can you be more specific on what you want to do?
How to make that launcher
Hi, you can watch the following video ruclips.net/video/yZLANdCIOdg/видео.html 😊
@@simplegoeasy8236 Thank you 😊
Thanks
@@isra_toka don't mention it 😊
Como doblo el paracaídas
You can refer to this video's time frame, between 9.10 and 10.30 minutes.
Where can I put my egg in
Hi @AlexSanchez
I can suggest you extend the length of the rocket, for example add one more compartment between the cap and the body, your egg can be put inside this new compartment.
@@simplegoeasy8236can I just put the egg at the cap?
You used a lot of materials that I didn't have, perhaps you could have used simpler materials?
all the materials are replaceable, you can use what ever similar materials that you have to instead.
Furthermore, all the materials that I have used also can get them in the shops, for example DIY or stationary shop. The prices also very cheap. ^^
@@simplegoeasy8236 ok, thank you
BERAPAKAH BERAT BOTOL ITU SAHABAT?
botol itu ringan sahaja, bitol itu hanya biasa punya sado botol.
BERPAKAH JUMLAH SAYAP BOTOL ITU!!!???!!!???
4 atau 6 pun boleh, jangan risau.
BERAT KA DI TGH DIA TU ATAU RINGAN
adakah kamu merujuk kepada tanah liat pemodelan?
if yes, itu jangan terlalu berat ya
+700 social credit
Thank you 😊
ok
Hi
Hi 😊
how much water did you put in it?
Hi @-someone_ You can adjust the amount of water you wish to put in, and you can test it yourself to see how high it can reach.
can this landing within 50-100 meter?
Hi @nurqaseh6212
If you're wondering if a rocket will land within 50-100 meters of where it was launched, the answer is yes,, unless it's flying high and facing strong winds.
Thank you. 😊