HUMBLE NOTE: For clarification, the 2x2 wood legs on the galley are temporary. They will be replaced by 80/20 aluminum. I just did not have the time to fully complete the build. The last thing I want to do is delay the video!
Humble Road I love you man build the only problem is it's going to take all day to build it we put in frames in like that then you got to put the skin all around it that's more work I do my doctor would of course I'm doing my high top right now and then you go to my channel you'll see my high top be made DIY style out of wood
I get what you are saying, and I am sensitive to not duplicating my efforts. This will not be box framing over a skeleton frame. The entire top of this galley module is countertop material, which you would use on any base. The entire front of the base is louvered doors and the cantilevered side panel is only 8"x20" Not too bad.
I have to say it again. This guy is giving you amazing information without asking for a thin dime. Humble, this nurse in a long term care facility says, " You are doing the work of love brother."
Thank you Theresa. It's easy when you love what you do. Now you on the other hand are the real hero. My Mom spent the last nine years of her life in a nursing home. Couldn't speak, couldn't hear, couldn't swallow and was going blind. But those nursing home caregivers treated her like she was their own. That's the true work of love.
Theresa Lind : I did the same job as you. I worked in nursing homes ( usually on rehab or Alzheimer’s units) for over 30 years. I loved it! I fully agree, that this Humble man, is providing great information, for all of those that need it. As far as us nurses, we especially love his attention to detail, and planning. Not to mention, his beautiful personality and his videography 😊
Humble. I love you. To give this information away is as generous as a designer can be. Please do not think that many starters won't know that you are Top Shelf. ❤❤❤❤❤❤🍺
George is a dangerous man and proves it in each video. His decision to prototype and use mockups to refine his design is brilliant. The decision to go modular is the future and Westfalia in Germany has been making RV components in a similar fashion. I'm enjoying every post in this series but it raises a deeper question: Why are the top RV manufacturers not employing these modern light weight techniques? The efficiency and flexibility benefits make perfect sense. George: Thank you for this 'seminar' on project management, planning and optimization methods in the guise of an RV project. Glad we got you here on RUclips.
How much fun can a person have in their "retirement"? I am sure there are lots of viewers that are envious of what you are able to do. But at the same time we cheer for your success, while we are also entertained. Great channel. It is hard to imagine how many hours are added to your conversion by doing this video channel. So, thank you for bringing us into your workshop!
Thank you, those are heartfelt words. I am truly humbled. Yes, the filming slows the building. Or does the building slow the filming? Ahh, doesn't matter, I love both! And I'm in no hurry! :-)
Clearly going for FAA certification. Great tv personality, really. Great videography. I really enjoy watching and await each notification, especially when the launch occurs. -Best, -hg
I was just thinking Teak louvered sliding barn type doors under the cooktop would save space, your a great meticulous designer, I wait patiently for every one of your videos.
Tamara Simmons +1 for sliding barn doors vs. swing outs. George, I'll build you any wood doors, drawers, whatever you want...for only the cost of materials. I have 30+ years of high-end woodworking experience, so what your looking for is a breeze to build. You'd be proud to include these creations in your build.
Wow! A 600 amp hr lithium battery - I am jealous! As I go around viewing class b rv’s I am astonished that the infrastructure on the systems is so primitive in engineering and design. Thanks so much for showing us that the class b reality can be so much different and so much better and in step with currently available technology. 🥇
Great as always. Just a suggestion . . . Put felt tape on the metal to metal applications. No matter how much torque you put on the hardware, it’s inevitable to eventually get squeaks going down the road. Home Depot sells different widths. I did it on my humble van( female here) and am I glad I did. Thanks for taking us along your build!
An excellent suggestion. I was going to use the vinyl moreso as a thermal break. Some sort of tape would be much easier and less intrusive on my measurements.
Awesome! I am really impressed with the design and the strength of your build! I love the anticipation of waiting on a new upload from you. Keep up the great work!!
Leonardo da Vinci could not have done it better. Or made it so much fun. Your videos and music selection are as artfully created as the structure. So thankful I found you on the web! You are a treasure, George.
I'm going to need to know the weight off all those nuts and bolts. I can guesstimate the teak. Keeping a tally. :) I don't know why I enjoy busting your chops so much. You are the master builder. I'm so impressed with your well thought out plans.
You never disappoint with your videos. Love ❤️ the open space idea at the end of the counter. I’m so anxious and excited when I read your reply’s to comments and you mention things like “surprises and to be revealed later “.
Sorry I missed that in the video. After a little more thought I’m not sure hinging the hard surface and having a space where it closes (unavailable) in the counter is the most efficient way. A drawer to store it would be easier, less expensive and be a cleaner finished look. Just my thought. I have been RVing since the 60’s and have had every type of RV. I have drawn plans for van conversions but never built one for myself.
I am in no way interested in building a van, but you make it so much fun, I just love to watch it come together... Good job. Can't wait to see what it looks like all done... Maybe I'll have to have one of my very own!! Love your designs and ideas.
A thought: if it were mine I would put a drawer or open space with a fold down lip in the center space to store the cooktop. You may find you don’t want the cooktop in the middle all the time. The ability to move it anywhere on the counter when being used gives you a lot more options.
Correct. As I explained in the video, you can use it right where is lives, by opening the countertop lid, or remove it from the recess it lives in and bring it outside, or off center on the counter top. It's portable. Options. ;-)
I was thinking the same thing. Awesome. I wud want the option to bring the cooktop outside for outdoor cooking. I also feel cooktops sud be closest to the sliding side door so that I cud cook and have the smells fly out of the door, instead of putting the sink beside the side door which I've seen a lot of and no likey.
BTW, I think you should name the van Leo! After Leonardo da Vinci! Especially since that was a reference you made during the construction of your mighty van!
At First Sight...A Work Of Art !!!! I Have A Relative Who (subscribed) When He Saw Your Idea & Screen Door Design...LOL NOW!!! You Have Him & I "HOOKED" Watching Your Videos..."Your" Our Kind Of People...Cheers!!!!
⭐️⭐️⭐️⭐️⭐️ Wow, you are changing the RV Industry To EXCELLENCE...💃🏽💃🏽💃🏽💃🏽💃🏽💃🏽💃🏽💃🏽💃🏽💃🏽💃🏽🕺🏽🕺🏽🕺🏽🕺🏽🕺🏽🕺🏽🕺🏽🕺🏽🕺🏽🕺🏽🕺🏽🕺🏽🕺🏽Dancing Music....🚐 Humble Road RV changed the industry...Building It...🚐 right ... Thank you “Humble Road” This is historic 🌹🌹🌹🌹🌹🌹🌹
Love your videos, I’m a Chef in Philly and find your cooking videos to be entertaining! It’s all about fun and passion and you’ve got that. Someday I’ll come visit and show you how to properly cut an onion 😀. I love that your giving a large dedicated space to the Galley, we think alike. I hate microwaves I don’t have them in my restaurant or house so would never use one in a van. I saw something interesting the other day that you might find intriguing since I saw your not using propane. Webasto makes a diesel fueled cooktop that draws directly from the van tank. What’s really cool about it is you can cook directly on it (like a flat top) and it doesn’t require special pans. That would really make this van even more unique. If you Google Webasto Diesel Cooker you should find plenty of information on it.
Oh so funny! I do love to cook, but, good Lord! I'm a happy idiot in the kitchen! :-D Let's get together and do a real cooking video collaboration! You can prepare something in my van and we'll promote however you like. A pop up Class B van meal. Serve it right on the street!
Humble Road love that idea! Could even invite all your Subs that live nearby, a real eat, meet and greet! I’m hoping to get my first camper van soon, and when I do I’m going to try and start a RUclips channel solely dedicated to RV cooking. That would be a great way to promote both our channels. Maybe even invite or meet up with some other popular RV RUclips personalities. I love when RUclipsrs collaborate on videos. I think it’s so cool.
George, God has certainly blessed you with engineering and buiding capabilities that I could only dream of having! I am NEVER disappointed when I see what you have done next...no matter WHAT it is! When you finish this RV build it'll be the envy of any and everybody! I applaud you in the highest! It's just very sad that all RV manufacturers do not put the pride in their products as you do. Work safe, stay happy, love God, and, 'keep on building'!! (7/10/2018 Tuesday 4:12pmCST Houston, Texas)
Thank you for your encouragement Jim. Many have echoed your sentiment about the rv industry taking notice. Quite frankly, I hope they keep their heads in the sand! ;-)
I like the idea of open space benief. I have small westypoo dog and I don't see any designe who will be implement like a dog place on floor when I can take stuff from normal house and just pace it there without big Hassel.....maybe next challenge for designers
I understand exactly what you mean. As it turns out, I will simply keep the double cooktop in a drawer and not accessed through the hinged countertop. Waaaay too many people commented they did not like that recessed idea, too limiting. For instance what if you like the cooktop slightly to the left or right of prep area. Options!
Very nice work! 8020 is a great material choice to work with! I worked with 8020 material on building framework for automated assembly equipment and have a suggestion for assembly. The cut ends can be tapped for use of a button head cap screw and then drill a clearance hole 3/4" from the end of the 2nd piece to be attached for an allen wrench. This method could eliminate the use of the fabricated angle corner pieces that you made, but still could be used to help the 8020 from twisting. And or the End Fastener that 8020 sells will also eliminate twisting and provide a smooth connection between the two pieces being connected. Great work, looking forward to the next video!
Thanks for those suggestions, Jim. Keep them coming! I just started tapping the ends this week. In testing it's breakpoint, I was surprised at how strong a joint it made!
Awesome Video as always! Love the idea of storing the cooktop and accessible from the top! I hate that I have to carry an extra cookstove especially since both are propane! It takes up much room and every sq inch in a van matters!
I would put the induction cooktop in a drawer under the counter vs having the counter top open up. If you have stuff on the counter, then you’ll have to move it to take the stove out. You kind of defeat the purpose of have a not-permanently-fixed stovetop by having a designated spot for it’s use. Otherwise great build. I can’t wait to see the finished product.
This build is nothing less than top notch. I'm sure the most expensive factory class B's built on the same chassis aren't even close to this quality; especially when it comes to the hidden parts the customers can't evaluate. Considering the curvature of the walls and the varying inclines of anyplace you might park, I'm wondering when you installed the galley section, if you adjusted a level to square with the van floor or did you entirely use measurements and squares to keep everything level with the van floor?
Thank you for your words of support. Very encouraging! Unless you are absolutely sure your van floor is level in every direction, which I have done for certain parts of this build, it's best to square and measure off the chassis. Take notice of the predrilled holes in the van walls. Many of them line up for aftermarket options.
George....great kitchen space design!!!! However, what about placing that 160 pound lithium battery and 75 pound inverter just aft of the passenger wheel well on a slide out platform near the right rear access door mounted on the floor? Can't wait for your conversion kit plans!!! Keep up the great work. Mike
The main reason for the battery placement is handling of the vehicle. All the big players should be between the axles. Favoring just ahead of the rear axle. I am trying to nudge my fresh tank aft as much as I can. Once I build the fridge/wardrobe modules, I'll know exactly what I can and can't do.
You MUST be having the time of your life right now. I hope that if you’re feeling stressed that it’s the good kind; the excitement and satisfaction of seeing your vision come together. Also, maybe you’ve addressed this in previous videos and I just don’t remember.....do you plan on selling the modules or the finished vans?
I am having a good time. I remember the feeling I used to get as a kid, watching Swiss Family Robinson. I would've loved to be stranded on a tropical island and make all that cool stuff from nothing! Heck, I loved Gilligan's Island as well! I am definitely selling this van and intend to do a few builds every year. Nothing cookie cutter, though. Specialty stuff. I suppose I could bundle and sell the modules. Good idea!
Still loving these videos, thanks again! In this video at about 2:27 you mention using brass coated stainless steel rivnuts. Assuming the stainless is for strength and brass is to keep the ss and van steel separated for rust prevention. Would like to do the same but can't find anyone who knows where to get them. Both Grainger and my local hardware store are clueless. Can you point me in the right the direction? Thanks! Jason
Kenetube is a doing a wonderful job with his van build. He was so gracious as to allow me the use of some of his van photos in one of my early videos about 80/20. He's a good man.
I have had very good results with mine. It is very hard to operate when your arms are outstretched and overhead, as at the ceiling struts. Because the rivet MUST be properly seated throughout the install. Because of the volume of RIv-nuts I anticipate installing over time, I think I will buy a compressor driven gun, possibly Avdel.
If you add up all the volume of the 80/20 it's not an insubstantial reduction in total storage space in the van. It works well in a van of that size but definitely overkill
In addition to supporting the 160lb battery and corian countertop, I concern myself with getting T-boned in an accident. It's fine for the 8020 to get destroyed, but I want it to hold everything like a safety net.
I am strangely fascinated by your videos. You are an excellent craftsman and I can’t wait to see the next installment. But, shouldn’t you be out there traveling in your RV while the weather is nice over the summer and work on this project over the winter months?
I would love to be out in the western USA and Canada. Heck, I would love to live full time in my van! We can't always get what we want… if you try sometimes, you'll get what you need..
I have watched almost all of your videos. I enjoy your style. I am also building a van right now. In my opinion you are doing this the hardest way possible. Way, way Overkill. But to each his own. Having spent A LOT of time researching lithium battery systems, My Question is; What is voltage of your system? Are You going to use Victron components? Can the alternator charge your system? If I had to rebuild my 24 volt liuthum system, I would go 48 volt and buy a victron charge controller instead of my 24 volt renogy charge controller.
Thanks for watching Glenn. I appreciate that. When you see the finished product, you will understand the need for "overkill" as you put it. I see it as quality construction designed for the long term, not economy. I am not ready to provide details on my battery system beyond what I have already mentioned.
I'm fitting out a new motorhome I'm building and saw the 80/20 product you and in a couple of other camper van buildouts. I was considering making the frame for my bed frame dinette, cupboards, counters, bathroom walls and all from 1.25" square profile steel rollcage material welded in place. Now that I'm impressed with your system I am wondering how it would perform in a rollover or side collision on the road. I'm sure much better than the toothpick structure of most RVs, but something less than a rollcage. Do you have any data or feedback about this question?
Great video. One question though, and sorry if you have already discussed this in another video, (I haven't seen that you have addressed this topic) but what was your deciding factor to go with the 3500 vs the 2500? I see many RUclipsr's doing van builds with the 2500 and they do not seem to have any problems with weight. The 2500 I assume would get better gas mileage as well?
My aim is to build a stout full time livable van. One that will outlast it's owners. With all the best quality materials and systems. Simple systems, nothing superfluous. All that will add up, weight-wise. Mercedes offers a 3500 with a GVWR of 9900# and also 11,030#. I went with the 11,030.
Tim Brounscheidel most induction p Hot plates are binary ie on/off eg. 50% power cycles on/off half the time. Here in New Zealand our 230v induction stoves are min 1800W or usually 2400W EACH and thus you can’t run two at once. Low power levels won’t help because they may both be on full power at the same time.
This particular cooktop has a total of 1800w. It can be shared between the two burners in several different ratios; 900/900, 1000/800, 400/1200, 1800/0. But never will the unit ever exceed 1800w. Unless there is a malfunction… You get the idea.
Really enjoy watching your build. I bought an induction cooktop from IKEA($50) specifically for my Sprinter. I bring it inside the house and use it all the time. I rarely use it above 1000w. Only higher for short periods of time as food seems to cook too fast and burn at higher settings.
A small 200W inverter For a simple Batt charging station (Cam,Laptop,Cell phone) This will save some amps and cycle life of you'r house batts when no need for 3000W inv to be running
You, my friend, have a great mind. I plan on connecting just such an inverter to the tiny little house battery (90Ahr AGM) that comes with the Sprinter. It won't even be connected to the main house system.
I went back twice and couldn't find if the louvered doors were for heat or off-gassing, but if for off-gassing I would vent outside and maybe some 5volt computer fan to help with the ventilation. I'm not familiar with the battery you are using. Love the toe kick and canterlevered counter.
Hey George, I don't know if you're aware but SnapOn now makes RATCHETING open end and box wrenches for all those hard to reach nuts. I'm just saying. 🔧🔩👍😉
Vicki Bedford one of the advantages of this type of build is that you are not locked into the conventional order of installation. I had always intended on fitting in all of the modules first. I will bring the wire to the module rather than build a module over the wire. This way I have great flexibility. I can make changes and adjustments on the fly.
I was just wondering if 2 computer fans installed 1 installed at the bottom, on the left-hand side just below the battery sucking air in and then the 2nd computer fan installed just above by the inverter and back towards right corner blowing out towards the sink, would help on air circulation. Computer fans are quiet & easy to install, was just wondering if it would help keep that expensive equipment cool. Might not be needed as I don't know if the equipment you are using will even create much heat if any heat in their operation. If it's no concern, then please consider this a comment from the peanuts gallery! Enjoying the build, it's working! :)
That is a viable suggestion. I will be using those small high volume fans in another part of the van ventilation system, so why not in the battery closet? Good one!
Dino Hicks The batteries, inverter charger, solar charge controller, etc. will all be just fine with natural convection cooling. The inverter already had a fan (or fans). Additional fans would be unnecessary energy sappers.
Nope, she is a homebody. The constant moving about would drive her crazy, and for her, a van is too small. So the arrangement is; she won't say "don't go" and I won't say "you must come." It's strangely acceptable to each of us.
Yes, I have thought of a Murphy bed. For my particular needs, MB would not be optimal. Bright with plenty of natural light, open and airy. These are a few of my "must haves" and the MB blocks an entire window all day. Also, I have my fresh water tank under the futon alongside a large bedding drawer. The MB cancels the under couch storage.
Humble Road as u said every van is different for everyone .... Making a bed up every night would annoy me... Love the 80/20 kitchen ... And the shower idea is brilliant I'm 6 foot and 95kgs (210lbs) So I have to have a decent size shower. Hate the showers with toilets in it... That's stupid... And thanks for the measurements video 👍👍👍👍👍👍
I have been using the RV SuperBag. It is a kingsize sleeping bag with top sheet and bottom sheet inside. I LOVE IT! The top sheet bottom sheet is one long sheet connected at your feet and held in place everywhere by velcro strips along the sides. Very comfortable, very easy to use and easy to clean. The bag has a summer side and a winter side. So making up the bed is as simple as taking the bag out of the drawer and spread it out on the bed. www.rvsuperbag.com
I wonder if you could make those 90° connectors another 1/4" to 1/3" longer so you can use a socket or ratcheting wrench instead of being stuck tightening them with a standard wrench? Unless, of course, you're goal is Popeye sized forearms ;-)
I wouldn't mind Popeye sized forearms! I am what I am…. From a structural standpoint, the fixing bolts should be as close to the center of the joint as physically possible. So I positioned them where I can just get each nut onto the threads.
The 80/20 stuff looks amazing for this purpose. Using aluminium for the furniture is great from both weight and strength points of view, but welding aluminium takes an expert. This, you just cut to length, drill a little and bolt it down. I'm a bit concerned though that you're leaving huge thermal bridges with this approach. You have the exterior metal shell in direct contact with the internal struts/ribs, and now you're bolting the aluminium 80/20 straight to those ribs. So there is an uninterrupted metal thermal bridge all the way from the outside wall to the totality of your kitchen workbench ribs. Insulating in the cavities alone in the van walls won't do the job, if you really want to insulate, you have to cover the entire wall with insulation material. That makes bolting things to the ribs from the inside much harder as you have to go through insulation and plywood but it's the only way I can see to minimize or eliminate thermal bridges.
You definitely know your stuff, Croft. I have mentioned in a few of my videos, right now, I am building and test fitting all the modules. Even the flooring is just sitting loosely at this point. Once everything is built and fits to my liking, it all comes out and I go in and add my heavy mass vinyl between the modules and the van frame. I am very sensitive to addressing the thermal transfer of heat and cold. Although, I am using Rivnuts instead of Plus (rubber).
At the time I shot this video, I had not completed the galley build, so the 2x2 wood legs were only a stand in. In the final, the whole Magilla is 8020.
1000x thanks for all your fantastic youtube information !👄👄👄👄😚 My van. A Mercedes sprinter 313 called🚐💨 Cherished is ready to go. See you in europe🤔😁👄👄👄
HUMBLE NOTE: For clarification, the 2x2 wood legs on the galley are temporary. They will be replaced by 80/20 aluminum. I just did not have the time to fully complete the build. The last thing I want to do is delay the video!
Humble Road - Right on!! Whatever you do, Do Not Delay the Video! There's nothing uglier than thousands marching up your driveway demanding a video!
Humble Road I love you man build the only problem is it's going to take all day to build it we put in frames in like that then you got to put the skin all around it that's more work I do my doctor would of course I'm doing my high top right now and then you go to my channel you'll see my high top be made DIY style out of wood
I get what you are saying, and I am sensitive to not duplicating my efforts. This will not be box framing over a skeleton frame. The entire top of this galley module is countertop material, which you would use on any base. The entire front of the base is louvered doors and the cantilevered side panel is only 8"x20" Not too bad.
@@skapunkoialternativeliving6522 How is your high top doing? Any problems so far?
I have to say it again. This guy is giving you amazing information without asking for a thin dime. Humble, this nurse in a long term care facility says, " You are doing the work of love brother."
Thank you Theresa. It's easy when you love what you do. Now you on the other hand are the real hero. My Mom spent the last nine years of her life in a nursing home. Couldn't speak, couldn't hear, couldn't swallow and was going blind. But those nursing home caregivers treated her like she was their own. That's the true work of love.
Theresa Lind -“ditto” what you expressed!!!
Theresa Lind : I did the same job as you. I worked in nursing homes ( usually on rehab or Alzheimer’s units) for over 30 years. I loved it!
I fully agree, that this Humble man, is providing great information, for all of those that need it. As far as us nurses, we especially love his attention to detail, and planning. Not to mention, his beautiful personality and his videography 😊
I know you're a humble guy but I'm still going to say it. You are the God of campervans!
Humble. I love you. To give this information away is as generous as a designer can be. Please do not think that many starters won't know that you are Top Shelf. ❤❤❤❤❤❤🍺
No pun intended.😁
George is a dangerous man and proves it in each video. His decision to prototype and use mockups to refine his design is brilliant. The decision to go modular is the future and Westfalia in Germany has been making RV components in a similar fashion.
I'm enjoying every post in this series but it raises a deeper question: Why are the top RV manufacturers not employing these modern light weight techniques? The efficiency and flexibility benefits make perfect sense.
George: Thank you for this 'seminar' on project management, planning and optimization methods in the guise of an RV project. Glad we got you here on RUclips.
Thank you for your support, Anthony. But for goodness sakes, SHHHHH! about the manufacturers picking up this ball and running with it….. ;-)
If only RVs (and even new cars) were built with this level of attention to detail and quality.
How much fun can a person have in their "retirement"? I am sure there are lots of viewers that are envious of what you are able to do. But at the same time we cheer for your success, while we are also entertained. Great channel. It is hard to imagine how many hours are added to your conversion by doing this video channel. So, thank you for bringing us into your workshop!
Thank you, those are heartfelt words. I am truly humbled. Yes, the filming slows the building. Or does the building slow the filming? Ahh, doesn't matter, I love both! And I'm in no hurry! :-)
Clearly going for FAA certification. Great tv personality, really. Great videography. I really enjoy watching and await each notification, especially when the launch occurs. -Best, -hg
I love watching someone with a dream, mad skills, and a passion for a project. Well done sir.
I like the way you said that.
I watch in awe!! Once again, carry on my friend!
I was just thinking Teak louvered sliding barn type doors under the cooktop would save space, your a great meticulous designer, I wait patiently for every one of your videos.
Tamara Simmons +1 for sliding barn doors vs. swing outs.
George, I'll build you any wood doors, drawers, whatever you want...for only the cost of materials. I have 30+ years of high-end woodworking experience, so what your looking for is a breeze to build. You'd be proud to include these creations in your build.
You got a deal, John! Thank you. We can work out the details, Maybe you can put your hand on subsequent builds?
Love sliding barn door idea ❤️
Love that idea
You are the perfect combination of artist and master craftsman. Thank you for your terrific talent.
Always a delight.
Incredible workmanship...thank you for sharing.
Wow! A 600 amp hr lithium battery - I am jealous! As I go around viewing class b rv’s I am astonished that the infrastructure on the systems is so primitive in engineering and design. Thanks so much for showing us that the class b reality can be so much different and so much better and in step with currently available technology. 🥇
Great as always. Just a suggestion . . . Put felt tape on the metal to metal applications. No matter how much torque you put on the hardware, it’s inevitable to eventually get squeaks going down the road. Home Depot sells different widths. I did it on my humble van( female here) and am I glad I did. Thanks for taking us along your build!
An excellent suggestion. I was going to use the vinyl moreso as a thermal break. Some sort of tape would be much easier and less intrusive on my measurements.
Great tip! Added a lot to the fine points.
Your “bones system” for the van is AWESOME!!!👍😎
Another great video - as always - thank you for sharing!
Someone has been busy . Nice job
That's the right kind of music for a beautiful long counter! It's the best part about baking in my own kitchen. Back to the video!
George-thank you for taking the time to teach, film, and edit. You are one wonderful guy! Lisa
Awesome! I am really impressed with the design and the strength of your build! I love the anticipation of waiting on a new upload from you. Keep up the great work!!
Thank you Timothy! I think this 80/20 stuff has great potential for beauty. And the strength is truly unimaginable!
I hate waiting! but I do love every video. I'm always excited when I happen to be online and one gets posted.
Great job btw!!!🌹
Leonardo da Vinci could not have done it better. Or made it so much fun. Your videos and music selection are as artfully created as the structure. So thankful I found you on the web! You are a treasure, George.
Thanks again!
I love it!
I’m drooling!
Man love the teak idea. Yacht like. You are going to to give pleasure way a run for their money
Great video . Thanks .
Since I have No Mechanical Skill... I find your Videos very interesting!!!
I'm going to need to know the weight off all those nuts and bolts. I can guesstimate the teak. Keeping a tally. :) I don't know why I enjoy busting your chops so much. You are the master builder. I'm so impressed with your well thought out plans.
Oh don't you worry, LOLA, payback's a bitch! ;-) I'ma coming to Texas one of these days..
I was thinking the same thing about the weight but I'm not kidding . Aluminum vs wood .
Stan, the aluminum is lighter and stronger. Not to mention aluminum does not rot, attract and hold moisture, etc..
#737. Thx 4 sharing!
Amazing craftsmanship! I am so glad you are sharing the videos of your progress on the RV!
You never disappoint with your videos. Love ❤️ the open space idea at the end of the counter. I’m so anxious and excited when I read your reply’s to comments and you mention things like “surprises and to be revealed later “.
I'm not 100% certain where this project is going but I'm enjoying the journey, keep going!
Check out the van build cardboard series of my videos, that should 'splain everything!
I've watched all your video's, I'm fully up to speed, just looking forward the completed article. Great work my friend.
I am so amazed by you quality of work and planning and tho I may not be able to do this, it is fascinating to see you plan and execute.
beyond words
You have some great ideas. I like the over hang at the end
Sorry I missed that in the video. After a little more thought I’m not sure hinging the hard surface and having a space where it closes (unavailable) in the counter is the most efficient way. A drawer to store it would be easier, less expensive and be a cleaner finished look. Just my thought. I have been RVing since the 60’s and have had every type of RV. I have drawn plans for van conversions but never built one for myself.
That is awesome...you’re giving me a lot of ideas!
Dang stunning 80/20! Looks like expensive jewelry for the van 😀 So enjoyed your music accompanying the 80/20 montage. Very clever 😄
I am in no way interested in building a van, but you make it so much fun, I just love to watch it come together... Good job. Can't wait to see what it looks like all done... Maybe I'll have to have one of my very own!! Love your designs and ideas.
A thought: if it were mine I would put a drawer or open space with a fold down lip in the center space to store the cooktop. You may find you don’t want the cooktop in the middle all the time. The ability to move it anywhere on the counter when being used gives you a lot more options.
Karen, I am the ambassador of options! You can use that cooktop anywhere you like, it's a tabletop model.
So it just stored in the space you are designing, not fixed? If so, that is perfect.
Correct. As I explained in the video, you can use it right where is lives, by opening the countertop lid, or remove it from the recess it lives in and bring it outside, or off center on the counter top. It's portable. Options. ;-)
I was thinking the same thing. Awesome. I wud want the option to bring the cooktop outside for outdoor cooking. I also feel cooktops sud be closest to the sliding side door so that I cud cook and have the smells fly out of the door, instead of putting the sink beside the side door which I've seen a lot of and no likey.
Love it!
BTW, I think you should name the van Leo! After Leonardo da Vinci! Especially since that was a reference you made during the construction of your mighty van!
OH DEAR! I lOVE THAT! And also because I am a Leo!
AWESOME! Leo Jr.!
At First Sight...A Work Of Art !!!! I Have A Relative Who (subscribed) When He Saw Your Idea & Screen Door Design...LOL NOW!!! You Have Him & I "HOOKED" Watching Your Videos..."Your" Our Kind Of People...Cheers!!!!
THANK YOU!!!
You are amazing! Look forward to each weekly update. Every week you knock my socks off!!
Great job, my friend!
If you ever find yourself in the New York City area, you have a place to stay.
Thanks, George....planning on it...I'm headed to Florida again next week for a few months, let me know if you are headed south again in the winter.
⭐️⭐️⭐️⭐️⭐️ Wow, you are changing the RV Industry To EXCELLENCE...💃🏽💃🏽💃🏽💃🏽💃🏽💃🏽💃🏽💃🏽💃🏽💃🏽💃🏽🕺🏽🕺🏽🕺🏽🕺🏽🕺🏽🕺🏽🕺🏽🕺🏽🕺🏽🕺🏽🕺🏽🕺🏽🕺🏽Dancing Music....🚐 Humble Road RV changed the industry...Building It...🚐 right ...
Thank you “Humble Road” This is historic 🌹🌹🌹🌹🌹🌹🌹
Exactly!
Hooray! lovelovelove it!
Love your videos, I’m a Chef in Philly and find your cooking videos to be entertaining! It’s all about fun and passion and you’ve got that. Someday I’ll come visit and show you how to properly cut an onion 😀. I love that your giving a large dedicated space to the Galley, we think alike. I hate microwaves I don’t have them in my restaurant or house so would never use one in a van. I saw something interesting the other day that you might find intriguing since I saw your not using propane. Webasto makes a diesel fueled cooktop that draws directly from the van tank. What’s really cool about it is you can cook directly on it (like a flat top) and it doesn’t require special pans. That would really make this van even more unique. If you Google Webasto Diesel Cooker you should find plenty of information on it.
Oh so funny! I do love to cook, but, good Lord! I'm a happy idiot in the kitchen! :-D
Let's get together and do a real cooking video collaboration! You can prepare something in my van and we'll promote however you like. A pop up Class B van meal. Serve it right on the street!
I am familiar with the Webasto diesel cooktops. I didn't think they were available in the USA. I could be mistaken.
Humble Road love that idea! Could even invite all your Subs that live nearby, a real eat, meet and greet! I’m hoping to get my first camper van soon, and when I do I’m going to try and start a RUclips channel solely dedicated to RV cooking. That would be a great way to promote both our channels. Maybe even invite or meet up with some other popular RV RUclips personalities. I love when RUclipsrs collaborate on videos. I think it’s so cool.
I'm in. Let's work out the details.
George, God has certainly blessed you with engineering and buiding capabilities that I could only dream of having! I am NEVER disappointed when I see what you have done next...no matter WHAT it is! When you finish this RV build it'll be the envy of any and everybody! I applaud you in the highest! It's just very sad that all RV manufacturers do not put the pride in their products as you do.
Work safe, stay happy, love God, and, 'keep on building'!!
(7/10/2018 Tuesday 4:12pmCST Houston, Texas)
Thank you for your encouragement Jim. Many have echoed your sentiment about the rv industry taking notice. Quite frankly, I hope they keep their heads in the sand! ;-)
I like the idea of open space benief. I have small westypoo dog and I don't see any designe who will be implement like a dog place on floor when I can take stuff from normal house and just pace it there without big Hassel.....maybe next challenge for designers
If only I had the means to buy it when its finished. You are going to have a top 1% van when you are done. Love the direction you are going.
Top 1%. I like that.
When doing the cook top don’t forget to allow room for the pots handle if your recessed the cook top into the bench I hope that makes sense
I understand exactly what you mean. As it turns out, I will simply keep the double cooktop in a drawer and not accessed through the hinged countertop. Waaaay too many people commented they did not like that recessed idea, too limiting. For instance what if you like the cooktop slightly to the left or right of prep area. Options!
Or you could try some pots with smaller handles
I selfishly hope some big media company doesn't pick you up for a show, as they should, until you've finished this build ;)
Don't worry. I would never belong to a club who would want me as a member...
Very nice work! 8020 is a great material choice to work with! I worked with 8020 material on building framework for automated assembly equipment and have a suggestion for assembly. The cut ends can be tapped for use of a button head cap screw and then drill a clearance hole 3/4" from the end of the 2nd piece to be attached for an allen wrench. This method could eliminate the use of the fabricated angle corner pieces that you made, but still could be used to help the 8020 from twisting. And or the End Fastener that 8020 sells will also eliminate twisting and provide a smooth connection between the two pieces being connected. Great work, looking forward to the next video!
Thanks for those suggestions, Jim. Keep them coming! I just started tapping the ends this week. In testing it's breakpoint, I was surprised at how strong a joint it made!
Look into the Magna stainless Nesting cook ware it'll fit nicely in the van . It doesn't take up much room. Thanks
Are you planning on having a thermal break between the 8020 and the van structure? Are you worried about the 8020 becoming a giant radiator?
In 99% of the cases where the 8020 touches the van chassis, there is a rubber break.
Awesome Video as always! Love the idea of storing the cooktop and accessible from the top! I hate that I have to carry an extra cookstove especially since both are propane! It takes up much room and every sq inch in a van matters!
Options, Katy, Options.
And there will be no propane in this van. Sleep soundly.
I would put the induction cooktop in a drawer under the counter vs having the counter top open up. If you have stuff on the counter, then you’ll have to move it to take the stove out. You kind of defeat the purpose of have a not-permanently-fixed stovetop by having a designated spot for it’s use. Otherwise great build. I can’t wait to see the finished product.
Think options..
This build is nothing less than top notch. I'm sure the most expensive factory class B's built on the same chassis aren't even close to this quality; especially when it comes to the hidden parts the customers can't evaluate. Considering the curvature of the walls and the varying inclines of anyplace you might park, I'm wondering when you installed the galley section, if you adjusted a level to square with the van floor or did you entirely use measurements and squares to keep everything level with the van floor?
Thank you for your words of support. Very encouraging! Unless you are absolutely sure your van floor is level in every direction, which I have done for certain parts of this build, it's best to square and measure off the chassis. Take notice of the predrilled holes in the van walls. Many of them line up for aftermarket options.
George....great kitchen space design!!!! However, what about placing that 160 pound lithium battery and 75 pound inverter just aft of the passenger wheel well on a slide out platform near the right rear access door mounted on the floor? Can't wait for your conversion kit plans!!! Keep up the great work. Mike
The main reason for the battery placement is handling of the vehicle. All the big players should be between the axles. Favoring just ahead of the rear axle. I am trying to nudge my fresh tank aft as much as I can. Once I build the fridge/wardrobe modules, I'll know exactly what I can and can't do.
You MUST be having the time of your life right now. I hope that if you’re feeling stressed that it’s the good kind; the excitement and satisfaction of seeing your vision come together. Also, maybe you’ve addressed this in previous videos and I just don’t remember.....do you plan on selling the modules or the finished vans?
I am having a good time. I remember the feeling I used to get as a kid, watching Swiss Family Robinson. I would've loved to be stranded on a tropical island and make all that cool stuff from nothing! Heck, I loved Gilligan's Island as well!
I am definitely selling this van and intend to do a few builds every year. Nothing cookie cutter, though. Specialty stuff. I suppose I could bundle and sell the modules. Good idea!
are you using 1515 for the galley? Would the 1010 work or is it to small?
Galley gets 10 series. The fridge and shower box get 15 series.
@@HumbleRoad Thanks. My wife and I are watching all of your videos now. We have just begun to start are van build.
Love at first site in under a minute. Was it because of the jazz music, or just the ingenious design?
Probably a little of both! ;-)
Still loving these videos, thanks again! In this video at about 2:27 you mention using brass coated stainless steel rivnuts. Assuming the stainless is for strength and brass is to keep the ss and van steel separated for rust prevention. Would like to do the same but can't find anyone who knows where to get them. Both Grainger and my local hardware store are clueless. Can you point me in the right the direction? Thanks! Jason
a.co/59DgWCy
a.co/9Ie4OEv
Ahhhh, bronze....thank you so much!
Wondering if you ever checked out Kenetube , he also used this system in his sprinter. very nice stuff. take care HR
Kenetube is a doing a wonderful job with his van build. He was so gracious as to allow me the use of some of his van photos in one of my early videos about 80/20. He's a good man.
I bought th eAstro rivnut gun and it works fine
I have had very good results with mine. It is very hard to operate when your arms are outstretched and overhead, as at the ceiling struts. Because the rivet MUST be properly seated throughout the install. Because of the volume of RIv-nuts I anticipate installing over time, I think I will buy a compressor driven gun, possibly Avdel.
Haha......Vanner nerd! Love the tattoo!
Click bait Ha!
Humble Road looking amazing, complicated but amazing!
If you add up all the volume of the 80/20 it's not an insubstantial reduction in total storage space in the van. It works well in a van of that size but definitely overkill
In addition to supporting the 160lb battery and corian countertop, I concern myself with getting T-boned in an accident. It's fine for the 8020 to get destroyed, but I want it to hold everything like a safety net.
I am strangely fascinated by your videos. You are an excellent craftsman and I can’t wait to see the next installment. But, shouldn’t you be out there traveling in your RV while the weather is nice over the summer and work on this project over the winter months?
I would love to be out in the western USA and Canada. Heck, I would love to live full time in my van! We can't always get what we want… if you try sometimes, you'll get what you need..
I have watched almost all of your videos. I enjoy your style. I am also building a van right now. In my opinion you are doing this the hardest way possible. Way, way Overkill. But to each his own. Having spent A LOT of time researching lithium battery systems, My Question is; What is voltage of your system? Are You going to use Victron components? Can the alternator charge your system? If I had to rebuild my 24 volt liuthum system, I would go 48 volt and buy a victron charge controller instead of my 24 volt renogy charge controller.
Thanks for watching Glenn. I appreciate that. When you see the finished product, you will understand the need for "overkill" as you put it. I see it as quality construction designed for the long term, not economy. I am not ready to provide details on my battery system beyond what I have already mentioned.
Another great vid. May I inquire as to how much you anticipate spending on 80/20, all in?
Looks like I am almost to the penny on my estimated budget of $2500.
What about a white wood on the curved smooth profiles? I was also thinking powder coating.
I've had an apostrophe! Check your Facebook messages.
I never noticed your tattoo before! Is it a dream catcher? ❤️
Yes. The flash is from a photo I took of a dreamcatcher that has traveled with me since the late nineties.
I'm fitting out a new motorhome I'm building and saw the 80/20 product you and in a couple of other camper van buildouts.
I was considering making the frame for my bed frame dinette, cupboards, counters, bathroom walls and all from 1.25" square profile steel rollcage material welded in place.
Now that I'm impressed with your system I am wondering how it would perform in a rollover or side collision on the road. I'm sure much better than the toothpick structure of most RVs, but something less than a rollcage.
Do you have any data or feedback about this question?
I cannot answer your question about roll over or side collision. This aluminum is going to be much lighter than the 1.25 square steel tubing.
Great video. One question though, and sorry if you have already discussed this in another video, (I haven't seen that you have addressed this topic) but what was your deciding factor to go with the 3500 vs the 2500? I see many RUclipsr's doing van builds with the 2500 and they do not seem to have any problems with weight. The 2500 I assume would get better gas mileage as well?
My aim is to build a stout full time livable van. One that will outlast it's owners. With all the best quality materials and systems. Simple systems, nothing superfluous. All that will add up, weight-wise. Mercedes offers a 3500 with a GVWR of 9900# and also 11,030#. I went with the 11,030.
Do you run into any problems with the 80/20 aluminum and other types of metals, such as the problems of dissimilar
metal corrosion?
Ask me in 10 years
Nice work! This is definitely the fun stuff. Did you figure out a dual induction cooktop that'll use less than 3000W with both elements on?
Yes, the dual cooktop shares 1800w between them.
And only if they are both on full blast which is almost never the case.
Tim Brounscheidel most induction p
Hot plates are binary ie on/off eg. 50% power cycles on/off half the time. Here in New Zealand our 230v induction stoves are min 1800W or usually 2400W EACH and thus you can’t run two at once. Low power levels won’t help because they may both be on full power at the same time.
This particular cooktop has a total of 1800w. It can be shared between the two burners in several different ratios; 900/900, 1000/800, 400/1200, 1800/0. But never will the unit ever exceed 1800w. Unless there is a malfunction… You get the idea.
Really enjoy watching your build. I bought an induction cooktop from IKEA($50) specifically for my Sprinter. I bring it inside the house and use it all the time. I rarely use it above 1000w. Only higher for short periods of time as food seems to cook too fast and burn at higher settings.
Are you using the 80/20 strictly for the structural strength of cabinet frames or is it lighter than a typical 2"x 2" wood frame?
I know nothing about building vans, but those galley bones look like they'll be earthquake-proof.
That's a good thing, because a camper van IS an earthquake on the inside! ;-)
Humble Road Yes I remember you saying that before, so I thought, oh he's taking care of that earthquake issue!
:-)
A small 200W inverter For a simple Batt charging station (Cam,Laptop,Cell phone) This will save some amps and cycle life of you'r house batts when no need for 3000W inv to be running
You, my friend, have a great mind. I plan on connecting just such an inverter to the tiny little house battery (90Ahr AGM) that comes with the Sprinter. It won't even be connected to the main house system.
Yep, Campskunk did that for the Wendland's RV, good idea.
ruclips.net/video/PMh8OUzFT5Y/видео.html
I went back twice and couldn't find if the louvered doors were for heat or off-gassing, but if for off-gassing I would vent outside and maybe some 5volt computer fan to help with the ventilation. I'm not familiar with the battery you are using. Love the toe kick and canterlevered counter.
No off gassing. LiPo is safe for inside the van. The battery closet will be open walled in terms of ventilation.
I was pretty certain you had that covered, BUT one day, yes one day Sir, I will catch something..... Na, I know better than that! ;-)
We all continue to learn something new every single day, I always say..
Journeyman lithium = no gases
Hey George, I don't know if you're aware but SnapOn now makes RATCHETING open end and box wrenches for all those hard to reach nuts. I'm just saying. 🔧🔩👍😉
Well I like what you're sayin' ! I'll DEFINITELY look into that! Thanks!
I’m confused! What happened to laying the electrical and plumbing lines and then insulation in the floor?
Vicki Bedford one of the advantages of this type of build is that you are not locked into the conventional order of installation. I had always intended on fitting in all of the modules first. I will bring the wire to the module rather than build a module over the wire. This way I have great flexibility. I can make changes and adjustments on the fly.
What is the right name of the aluminium beams frame you use?
Can you make the connector brackets a little longer so that you could use a socket instead of having to wrench them manually?
The closer the bolt locations are to the corners, the more structural integrity. I placed mine so I can just fit the nut onto each bolt.
👍
I was just wondering if 2 computer fans installed 1 installed at the bottom, on the left-hand side just below the battery sucking air in and then the 2nd computer fan installed just above by the inverter and back towards right corner blowing out towards the sink, would help on air circulation. Computer fans are quiet & easy to install, was just wondering if it would help keep that expensive equipment cool. Might not be needed as I don't know if the equipment you are using will even create much heat if any heat in their operation. If it's no concern, then please consider this a comment from the peanuts gallery! Enjoying the build, it's working! :)
That is a viable suggestion. I will be using those small high volume fans in another part of the van ventilation system, so why not in the battery closet? Good one!
Dino Hicks The batteries, inverter charger, solar charge controller, etc. will all be just fine with natural convection cooling. The inverter already had a fan (or fans). Additional fans would be unnecessary energy sappers.
John, good to know! Tks!
Also do you know about the 80/20 drilling guide tool?
The 80/20 drilling guide? I have not heard of that. Specific to 80/20?
👌👍
Fantastic! Has your Wife "gotten on board" yet with the whole #VanLife future for you yet?
Nope, she is a homebody. The constant moving about would drive her crazy, and for her, a van is too small. So the arrangement is; she won't say "don't go" and I won't say "you must come." It's strangely acceptable to each of us.
Have u thought of a Murphy bed with lounge
Instead of a futon ???
Yes, I have thought of a Murphy bed. For my particular needs, MB would not be optimal. Bright with plenty of natural light, open and airy. These are a few of my "must haves" and the MB blocks an entire window all day. Also, I have my fresh water tank under the futon alongside a large bedding drawer. The MB cancels the under couch storage.
Humble Road as u said every van is different for everyone ....
Making a bed up every night would annoy me...
Love the 80/20 kitchen ...
And the shower idea is brilliant
I'm 6 foot and 95kgs (210lbs)
So I have to have a decent size shower. Hate the showers with toilets in it... That's stupid...
And thanks for the measurements video 👍👍👍👍👍👍
I have been using the RV SuperBag. It is a kingsize sleeping bag with top sheet and bottom sheet inside. I LOVE IT! The top sheet bottom sheet is one long sheet connected at your feet and held in place everywhere by velcro strips along the sides. Very comfortable, very easy to use and easy to clean. The bag has a summer side and a winter side. So making up the bed is as simple as taking the bag out of the drawer and spread it out on the bed. www.rvsuperbag.com
I wonder if you could make those 90° connectors another 1/4" to 1/3" longer so you can use a socket or ratcheting wrench instead of being stuck tightening them with a standard wrench? Unless, of course, you're goal is Popeye sized forearms ;-)
I wouldn't mind Popeye sized forearms! I am what I am….
From a structural standpoint, the fixing bolts should be as close to the center of the joint as physically possible. So I positioned them where I can just get each nut onto the threads.
The 80/20 stuff looks amazing for this purpose. Using aluminium for the furniture is great from both weight and strength points of view, but welding aluminium takes an expert. This, you just cut to length, drill a little and bolt it down. I'm a bit concerned though that you're leaving huge thermal bridges with this approach. You have the exterior metal shell in direct contact with the internal struts/ribs, and now you're bolting the aluminium 80/20 straight to those ribs. So there is an uninterrupted metal thermal bridge all the way from the outside wall to the totality of your kitchen workbench ribs.
Insulating in the cavities alone in the van walls won't do the job, if you really want to insulate, you have to cover the entire wall with insulation material. That makes bolting things to the ribs from the inside much harder as you have to go through insulation and plywood but it's the only way I can see to minimize or eliminate thermal bridges.
You definitely know your stuff, Croft. I have mentioned in a few of my videos, right now, I am building and test fitting all the modules. Even the flooring is just sitting loosely at this point. Once everything is built and fits to my liking, it all comes out and I go in and add my heavy mass vinyl between the modules and the van frame. I am very sensitive to addressing the thermal transfer of heat and cold. Although, I am using Rivnuts instead of Plus (rubber).
Thinking you should be a Home Depot Affiliate. lol
Why some 2 x 2 wood legs and 80/20?
At the time I shot this video, I had not completed the galley build, so the 2x2 wood legs were only a stand in. In the final, the whole Magilla is 8020.
You must have an assistant looking all this stuff up OR you never sleep
1000x thanks for all your fantastic youtube information !👄👄👄👄😚
My van. A Mercedes sprinter 313 called🚐💨 Cherished is ready to go. See you in europe🤔😁👄👄👄
Best of luck on your journey. Stay in touch.
has this van been sold yet
not yet. but the real meat is just now starting to show itself.
All that extruded aluminum tracking must have cost a fortune. Cool, but expensive.
? Where are the wine bottles going?
That's one of the big ahhhh surprises for later on.. ;-)