I own a 300 SD turbo diesel 1983. My most favorite car! I have performed all kinds of maintenance. I bet I have over 300,000 miles the car. I had to replace the plastic gears in the odometer. So don't no actual millage. But still gets 23 mpg! Bought the car with factory rebuilt transmission! This car is a bullet proof tank on wheels. Many parts I have acquired from LKQ junkyards here in Texas. And online mail order parts houses! Car is easy to work on. If you turn the key and engine starts, your going anywhere you want to! By far the best engine Mercedes has ever made and engineered! I will never sale this car!
the perfect mechanic review I've ever come though. Direct and clear questions just like he was reading my mind. it is just perfect!! thankx WD. looking forward for such lovely content! stay safe everyone
The revs of my engine when u in the last gear don't match l can hardly reach 90 km an hour and if l do so the revs will be very high u will think the engine will blow up and it loses power.what might be the problem please help the engine is a 300d, this engine is in my truck and it is supposed to reach it's top speed 140km an hour without the revs going very high.
engine swap from w210 300td to w140 300td?? w140 300td om606.961 ran without oil due to leak and stalled in motion so can i get the same 300td om606.962 w210 engine that says identical . What would be different!? Will there be problems with installation, bushings, pipes for burnt gas, etc.
address/contact point for United Diesel? (do they have Monark Injectors? or do they offer rebuilts for sale?) Aslo, how much horesepower is needed to turn Injector pump @200RPM?
núm điều tốc không nên gộp để điều khiển hết động cơ bởi dễ sự cố quá tải hoặc sự cố sẽ hư hết. núm nào thì động cơ đó, có công tắc ngắt mở độc lập được kết nối với nhau bằng trục bánh răng, giúp các động cơ khác vẫn hoặt động nếu có động cơ bị hư...
It's nice to see that the fuel delivery from each individual cylinder is correct and within the specified tolerance. But i think its equally important also to check to make sure that the governor is functioning correctly in accordance with the correct test specifications. All the best. cheers!!!
The mechanic holds his gob open like Harvey Price when concentrating, typical thick American. Mike Brewer is your typical dodgy car salesman that will con you out of money the second you turn your back. Dodgy vibes from him completely.
Ah yes, my '87 300D had the injector pump internal cam shaft bearing (see 0:23) completely fell apart spewing ball bearings, blasting out the side of the injector pump. Thanks Mercedes! Worst car I ever owned. I put in a used injector pump from a junker to get the car running and out of my life.
Ant Andstead teaches the details with great knowledge and at the same time with simplicity, excellent professional!
Wheres Edd
Why do Americans say deesil
why do British people say "wuh-uh" (water) ?
I own a 300 SD turbo diesel 1983. My most favorite car! I have performed all kinds of maintenance. I bet I have over 300,000 miles the car. I had to replace the plastic gears in the odometer. So don't no actual millage. But still gets 23 mpg! Bought the car with factory rebuilt transmission! This car is a bullet proof tank on wheels. Many parts I have acquired from LKQ junkyards here in Texas. And online mail order parts houses! Car is easy to work on. If you turn the key and engine starts, your going anywhere you want to! By far the best engine Mercedes has ever made and engineered! I will never sale this car!
Pump shops are disappearing here in Australia,as people retire and much of the common rail gear is throw away, nice to see a old school shop
Thanks for the great video, very informative.
W123 is good but have no. Power better take the w124 300d turbo 150 hp
In africa we do it manually with no computer
Because we lack tools
How do u do it manually?...thanks
This saved my 300sd. I had to clean all my delivery valves as they were all rusted and now my car idles perfect.
If anyone complains that diesel engines cost a fortune to maintain and/or fix, refer them to this video.
it's only expensive if you don't do the work yourself.😁
Common rail is expensive either way.
good day! how can i watch this video full episode? this is very helpful!
Poor quality American fuel again
I not let Mike touch anything...Ant is the star here.
the perfect mechanic review I've ever come though. Direct and clear questions just like he was reading my mind. it is just perfect!! thankx WD. looking forward for such lovely content! stay safe everyone
Good day! How can i watch the full episode of this presentation?
I miss Ed.
This guy is obnoxious.
A real engineer
Very Nice job guys. What about a video on 250 d w124 with blue smoke problem and oil consumption . thanks a lot
It’s burning the oil, needs new cylinder rings I think
The revs of my engine when u in the last gear don't match l can hardly reach 90 km an hour and if l do so the revs will be very high u will think the engine will blow up and it loses power.what might be the problem please help the engine is a 300d, this engine is in my truck and it is supposed to reach it's top speed 140km an hour without the revs going very high.
engine swap from w210 300td to w140 300td??
w140 300td om606.961 ran without oil due to leak and stalled in motion so can i get the same 300td om606.962 w210 engine that says identical . What would be different!? Will there be problems with installation, bushings, pipes for burnt gas, etc.
Those pumps are the base reason for AMG to even appear, it was made those road tankers feel sporty. Just let them spit fuel and the cars will go.
Wtf
go ant well done
Can I send you my pump
address/contact point for United Diesel? (do they have Monark Injectors? or do they offer rebuilts for sale?) Aslo, how much horesepower is needed to turn Injector pump @200RPM?
núm điều tốc không nên gộp để điều khiển hết động cơ bởi dễ sự cố quá tải hoặc sự cố sẽ hư hết. núm nào thì động cơ đó, có công tắc ngắt mở độc lập được kết nối với nhau bằng trục bánh răng, giúp các động cơ khác vẫn hoặt động nếu có động cơ bị hư...
Hello Hello, of course you are the best best best, Thanks Sir gocha... Love
THIS AGAIN?!?!??!?!??!?!? How about some new content? same videos cropped 100 different ways ... over and over and over.
It's nice to see that the fuel delivery from each individual cylinder is correct and within the specified tolerance. But i think its equally important also to check to make sure that the governor is functioning correctly in accordance with the correct test specifications. All the best. cheers!!!
класс
Hello sir.
I am from Bangladesh. I want you to work here.
Air getting locked in the pump what to do
Good
Starting to get to like Ant, pleased i gave him a chance.
Where is the timing on the bolt
Smart yet wear gloves mate!
hút nén đẩy
Who flung dung
Injector pump
Love the content
What year mercedes 300td? 83? 84?
85
Lmao
The mechanic holds his gob open like Harvey Price when concentrating, typical thick American.
Mike Brewer is your typical dodgy car salesman that will con you out of money the second you turn your back. Dodgy vibes from him completely.
Ah yes, my '87 300D had the injector pump internal cam shaft bearing (see 0:23) completely fell apart spewing ball bearings, blasting out the side of the injector pump. Thanks Mercedes! Worst car I ever owned. I put in a used injector pump from a junker to get the car running and out of my life.