I really wanted to thank you for making this, especially for the fact you are not using a Dunston rolling mill. So many of us have entry level mills, it's just nice to see an actual application that will work for the rest of us. Thanks again!
You can also transfer the image (Lazer or even pics from magazines and artwork make with different mediums such as colored pencils and marker etc.) Using xylene. You just clean the metal as you did here, then add your image and then take a xylene marker or swab or cotton ball dipped in xylene and rub it lightly over the image "burnishing" it to the metal and usually onces its all been wettened and image showing thru the wet paper you can peel it off leaving the transferred image. Like a stick on tattoo. Kind of.lol I have been doing g this to transfer my artwork to metal surfaces for the last four years and it's been working great so far. I usually keep the images as is on the metal and seal em with a clear coat. But I am excited to see that I can use your method to etch my own art on the metal to give a 3d effect or to emboss onto my silver jewelry that I make.
I suppose if you had a lathe you could turn a mild steel roller the same size as your existing rollers. Etch the roller, and then heat treat it to harden it. You'd still be limited to roller width, but you could roll any length you wanted. You could add edge forming details or any other contour you wanted. Heck, the rollers could be made in any shape, not just flat. You'd have to make a negative bottom roller, but hey, you could texture both sides at the same time if that's what you wanted. Do you have a lathe? It sounds doable anyway. It would make a cool experiment anyway. Just a thought... Thanks again.
This is awesome!! I’ve been etching brass sheet with ferric chloride you create my own texture plates for years but I’ve been wanting to switch to steel plates because I believe they’d last much longer. I haven’t ever wanted to buy texture plates from Rio or anyone because those texture designs are available to everyone and I want originality. Thank you so much!! Now I got hurry over to Amazon, see ya!! Hahahhaha
Hey Jason.....i love all your videos....always so informative and easy to listen to! I have a ? i have been wanting to do this since i recently started etching but have been looking for info about what to use for my plate and other metals are too soft. today i went to a local metal supplier and got these wonderful steel scraps, was so excited came right home and got to work. i used vinyl resist, but followed everything else to the T. I just barely got an etch at all after an hr with 1.5V in a fresh batch of salt water. I was wondering if it was the type of steel i used. this has a black coating, i think the guy said it was black iron steel....i didnt realize there were so many diff types of steel.
I really do appreciate your posting this video.I only recently got interested in making etchings and know very little about the process.But I do have an idea that might interest you re graphics transfer part of etching.I bought a cheap chinese
Really very interesting video, good job. I was wondering about what type of steel to use? There are so many different kinds, I'm sure the hardness must factor in somewhere? Thanks!
Great video!! I'll re-watch the beaker part......a little unclear on the equipment, the wires, yikes! Does anyone know if I can purchase something already made for this step in the process? The actual salt, heat with wire part? Thank you for posting this, very educational! Nice work!!
Could you transfer the pattern to the silicone mat, and then apply the image to a curved surface? I know that this isn't really what you showed, but I am searching for a way to etch domed surfaces.
just subscribed to your channel! Can you give a link to your enamel resist video you referred to in this youtube? I find that photo resist works well... simple and really quite cheap.
Хобби
I really wanted to thank you for making this, especially for the fact you are not using a Dunston rolling mill. So many of us have entry level mills, it's just nice to see an actual application that will work for the rest of us. Thanks again!
You can also transfer the image (Lazer or even pics from magazines and artwork make with different mediums such as colored pencils and marker etc.) Using xylene. You just clean the metal as you did here, then add your image and then take a xylene marker or swab or cotton ball dipped in xylene and rub it lightly over the image "burnishing" it to the metal and usually onces its all been wettened and image showing thru the wet paper you can peel it off leaving the transferred image. Like a stick on tattoo. Kind of.lol I have been doing g this to transfer my artwork to metal surfaces for the last four years and it's been working great so far. I usually keep the images as is on the metal and seal em with a clear coat. But I am excited to see that I can use your method to etch my own art on the metal to give a 3d effect or to emboss onto my silver jewelry that I make.
I suppose if you had a lathe you could turn a mild steel roller the same size as your existing rollers. Etch the roller, and then heat treat it to harden it. You'd still be limited to roller width, but you could roll any length you wanted. You could add edge forming details or any other contour you wanted. Heck, the rollers could be made in any shape, not just flat. You'd have to make a negative bottom roller, but hey, you could texture both sides at the same time if that's what you wanted. Do you have a lathe? It sounds doable anyway. It would make a cool experiment anyway. Just a thought... Thanks again.
This is awesome!! I’ve been etching brass sheet with ferric chloride you create my own texture plates for years but I’ve been wanting to switch to steel plates because I believe they’d last much longer. I haven’t ever wanted to buy texture plates from Rio or anyone because those texture designs are available to everyone and I want originality. Thank you so much!! Now I got hurry over to Amazon, see ya!! Hahahhaha
Thank you for making this! All of your videos make experimentation less daunting.
big magic boost for the usa boys on the internet
Thank you for sharing! I have been looking for information to etch steel. This is great!!!!
That's really cool man. Probably be great for embossing paper also. Thanks for sharing...
Thank you so much for sharing this!
New sure for sure!
Hey Jason.....i love all your videos....always so informative and easy to listen to! I have a ? i have been wanting to do this since i recently started etching but have been looking for info about what to use for my plate and other metals are too soft. today i went to a local metal supplier and got these wonderful steel scraps, was so excited came right home and got to work. i used vinyl resist, but followed everything else to the T. I just barely got an etch at all after an hr with 1.5V in a fresh batch of salt water. I was wondering if it was the type of steel i used. this has a black coating, i think the guy said it was black iron steel....i didnt realize there were so many diff types of steel.
👍
I really do appreciate your posting this video.I only recently got interested in making etchings and know very little about the process.But I do have an idea that might interest you re graphics transfer part of etching.I bought a cheap chinese
Super nice tutorial with some great advice!
Really very interesting video, good job. I was wondering about what type of steel to use? There are so many different kinds, I'm sure the hardness must factor in somewhere? Thanks!
cold rolled mild steel is best
Great video!! I'll re-watch the beaker part......a little unclear on the equipment, the wires, yikes! Does anyone know if I can purchase something already made for this step in the process? The actual salt, heat with wire part? Thank you for posting this, very educational! Nice work!!
What kind of wire did you use to put in the beaker? Looks like copper?
What kind of wire did you have in the beaker ?
So... Oogoo is the adult version of Silly Putty? ...lol
Loved that stuff...
Will you do custom plated for a Jewelry Store
Could you transfer the pattern to the silicone mat, and then apply the image to a curved surface? I know that this isn't really what you showed, but I am searching for a way to etch domed surfaces.
It needs to be very flat for this method - Some etch and then chase Repousse or put it in a doming mold to get curved surfaces.
I was wondering if you would be interested in selling some plates? Could I hire you to make me some plates? If so what would it cost?
just subscribed to your channel! Can you give a link to your enamel resist video you referred to in this youtube? I find that photo resist works well... simple and really quite cheap.
hey! wondering if you used photo resist with this technique for etching. How did it go?
Bracelet