It all started with running across a youtube short of this build. Today I subscribed and watch every video on this build. Now I can’t wait for the next video.
not a fan of the fake batteries. I think something that’s functional would be a better option. A display maybe? But even then not sure if it would look good. Also I think some bbs wheels would also look better imo. Other than that the car is looking good!!!
Those look like a child’s home art project.. the paint is all alligatored too…please please take that crap out. This build is way too good for this. It would look awesome with oled monitor screen under one way glass instead and you could make it whatever you want… from custom battery artwork to active graphics
Great work. Couple things I see. I'm gonna ask again, but what is keeping water from collecting there? And two, I would of made those lights a battery status meter.
Better without it I think. Better make is some functional thing... Love the car. Hot rodding is alive and well. Keep it up. Just found your build and love it
Those are definitely dope. Nice aesthetic touch to the area without having to make it look too busy. Reminiscent of many a mid engine cad with the engine showing through the panel.
Corniest thing I've ever seen. Went from a badass car to something I'd be embarrassed of...... This is something a 17 year old would do to a 92' Accord
Might want to figure out a way to get water to drain, Think the back of that car, just might become a swimming pool, if you don't and ever bring it into the raid and try to treat it like a daily driver. Love how it looks! Can't wait to see it all complete, Subbed so I get to see the finished project!
Some other comments seem to agree on this as well. It just looks a little tacky. If it was me, well first off I wouldn’t have done it, but the batteries themselves and the way they look are tacky. Making them look like fake Duracell batteries would have been hilarious 😆
Slot or notch the tubes sonyou have a repeater location when fitting and black pixel out edge the perspex underneath like they do on real glass so you do t get any heat warping in the sun. Looks proper then toi
One thing I could recommend when you're spraying paint is never lay the first layer thick. Same thing with primer. It'll prevent streaks, bubbles, and runs. Get a thin coat that you can see through, then wait until the paint is tacky, then do a good, thick second layer. It helps the finish a lot. I love the textured finish you have for this part of the build but say when it comes to painting the car itself, the extra step will pay off.
I had same crack reaction because of using 2 coats of diffrent spray paint. Would look cool to sand the red and leave it black with red in the craks than clearcoat😅
I think it’s a decent idea because like what else is there to put there right? But I think it was poor execution. All this elaborate work and you want plastic tubes? I would’ve gone for aluminum for a way better “feel”. I say feel as I’m sure not many people would notice the difference it would just be one of the small things that you know about and (maybe) feel better about. And then you can also get it powder coated and have everything look way more premium. Not to mention who knows how that paint on the plastic will hold up in the long run with how much sun exposure that location of the car will receive. I also think that if you did WHITE led lighting for the Tesla logo cutouts and give them more of a purpose by making them react with your different headlight modes, flashing/pulsing when you lock/unlock the car, flashing red with the panic button/alarm, etc. All of that with the addition of 2 speaker or subwoofers being mounted inside and have cutouts in your housing for them to face into the cab of the car would look very nice from the interior and also elevate the function of it all. Over all it’s your car and your project and if it makes you happy then great, but in my opinion (and apparently many others) this is not it…BUT if you used this as a “rough draft” so to speak then I believe you could really build and expand on this idea
it looks cool buttt, my suggestion is that the paintwork should probably be cleaner because tesla cars if you notice are very minimalistic and the paintworks are very clean and shiny i suggest that instead of it having textured paint it should instead have clean and smooth and glossy paintwork, kinda like the sticker (if you want to keep it since there are a lot of negative reviews on that ) btw i think its better if you use white light instead of red instead the red one is pretty unnoticeable, and i think it would've looked better if the letters are vertical, and what if it actually has batteries but for the cosmetic lights and stuff that you are probably gonna add in the future? btw if you want to paint on plastic you should sand it first so that the paint stays longer.
This is super awesome and all, but what's really at the forefront of my mind is the question of why you look like Pedro Pascal and Michael Schumacher managed to conceive a baby together.
I like the battery tube look but it would have been better to light them up with white lights not red. When you used the flashlight it made the logo pop but with the red lights you could barely see the TESLA logo.
Personally I like it, I see a lot of people hating on it but I still think it’s cool. You will only be able to see the beauty it adds after he paints the car.
Hey, just watched majority of the roadster content on these past days. Let me tell you, excellent work! One of one ! You've made a esthetic that is super enjoyable. Got to this episode, where you got the idea of these tubes. Wonderfull to see how you surpass things in your way and how you so creative as well. The way you texturize it and how it turned out was cool. But for me they dont fit the car, they take away all the past esthetic you've created for the roadster. Another think that bothers me in them is the way you read the "Tesla" , facing frontwards to the car it is confusing for the simpliest rules of reading from left to right. Sorry for the big comment, but I think this is a project so amazing that all inputs will be good for it !
You know what would be sweet? If those two cylinders were able to have a lighting effect that portrays some type of ‘energy’ wave travelling through them. Imagine something like the Aurora Borealis (able to change colour of course) or like a plasma wave.
A sort of carbon carbon cover with two symmetrical bumps would look amazing in that place. You can make the form and then have it custom made in carbon fibre. Maybe you want it to be 100% own work but I think that would be the best solution. The car in general should have some carbon parts/details though imo
Would be cool if you incorporated the actual battery life into what you did but inside the tubes and them be clear tube, so you can turn car on and literally show your batteries are charged n ready to race lol
Maybe swap out those single color leds to a rgb led with a pcb board that goes from red-green and then incorporate battery percentage (red=charge green=full battery)
remove those fake batteries it takes away from the real work u did, or at least turn it into a sub box
Agreed, looks corny too
Subwoofer bazooka tubes for sure..
Seriously 👎.... sometimes you just gotta know when to stop
Should’ve made those look like Duracell instead of bs TESLA lol
You would be much better off making a small boot and a custom bag to fit in there
Really not a fan of those fake batteries but everything else looks sick
needs something to break up the design a bit - if it was all just flat and white it'd look a bit dull
@@Cokbotdoesn’t have to be flat and white either
@@FranzJrob thats litterly the desing tho
Not a big fan of those non functioning tubes, I gotta ask you...why? I could see if they were like speakers that look like batteries.
The car is a child of a Cybertruck and a Lamborghini.
If you ever saw a Lambo, then you'll know why 😉
Because he wanted to
Cause it’s looks fckin cool
Great work on them but it probably looks better without
To me it looks like Nos cans
From cool to pimp my ride in one video.
Dude those are taking away from the actual real work you’ve done. They’ve got to go dude!!
Exactly, looks like a cheap pair of LED lights tbh
Bro it's not your car let him do what he wants
Just dont put them on when you make yours
It all started with running across a youtube short of this build. Today I subscribed and watch every video on this build. Now I can’t wait for the next video.
same here saw a short and been thru all the Videos of this insane and awesome build!!!
not a fan of the fake batteries. I think something that’s functional would be a better option. A display maybe? But even then not sure if it would look good. Also I think some bbs wheels would also look better imo. Other than that the car is looking good!!!
Put a subwoofer in the back and make those tubes into ports! That would be sick, especially when they actually have a use
Or put a couple big ass capacitors at the very least, the fake tube look terrible
I’ll be honest it looks kinda cheesy/cheap compared to the beautiful design you’ve done on the rest of the car
Not my favorite but it’s your car, your work and it’s you measuring your accomplishments not me. Well done sir I respect it
why?
Thank you for taking us along with you on this adventure. This whole process was amazing. Many people would have taken years to complete.
Those look like a child’s home art project.. the paint is all alligatored too…please please take that crap out. This build is way too good for this. It would look awesome with oled monitor screen under one way glass instead and you could make it whatever you want… from custom battery artwork to active graphics
You wanna know what’s crazy? People can do what they want with their own property.
@@werlder I guess that’s the same as your choice to be gay
@@werlder damn bro. You should run for President.. with a wealth of knowledge like that, you could help all humanity
Looks like 2 Double-A batteries!!!
🔋
Great work. Couple things I see. I'm gonna ask again, but what is keeping water from collecting there? And two, I would of made those lights a battery status meter.
Looks sick mate, I really like the content you're making!
I really respect the amount of work you’re doing on this car. It looks badass. And it’s going to be fun as hell to drive when it’s done.
Better without it I think. Better make is some functional thing...
Love the car. Hot rodding is alive and well. Keep it up. Just found your build and love it
Cheesy red tubes
Use “White led” those red on red don’t look good
I also thought the same when made the initial test vs the final color, white looks so sick
Making them work as a battery meter would make them super cool…
This looks incredible keep it goin!
Texture should have been smooth and glossy
And white or black.
Or just not do that at all. 😂
Spray paint an inch or 2 around the glass edges black.. To hide the glue when you glue it in place
Still to date the most under rated build on yputibe, this out does soooo many builds.. wish some companies would get on bored for some sponsorship
Those are definitely dope. Nice aesthetic touch to the area without having to make it look too busy. Reminiscent of many a mid engine cad with the engine showing through the panel.
Nice use of the space
Rethink the decision
Not my cup of tea, but I love that you're doing this the way you want!
Looks nice. People need to shut up abouy it. They forget that this is a completely custom car. Looks creative!
Imagine if the lights blinked in sync like pulsing or something 🔥
Ginormous flux capacitor.👍. Hook it up to an audino and animate the lights.
Looks cool!
oooooh nooooooooo😢 100 to 0 real quick, real fucking quick
Corniest thing I've ever seen. Went from a badass car to something I'd be embarrassed of...... This is something a 17 year old would do to a 92' Accord
Good afternoon! Tell me, from which model did you use the rear marker light? I want to do something similar in Russia.
От 2022 лексуса LX600
А верхний стопарь от Toyota venza
what about a small back trunk with a cyber holigan hood signed that can be bought ?
Might want to figure out a way to get water to drain, Think the back of that car, just might become a swimming pool, if you don't and ever bring it into the raid and try to treat it like a daily driver. Love how it looks! Can't wait to see it all complete, Subbed so I get to see the finished project!
Thanks for keeping us updated, this project is sick. As for the hate, do what you wanna do man, its your car
Looks great! You should make two that say Duracell, that you could swap out.
Some other comments seem to agree on this as well. It just looks a little tacky. If it was me, well first off I wouldn’t have done it, but the batteries themselves and the way they look are tacky. Making them look like fake Duracell batteries would have been hilarious 😆
So that's the Kar that was in the bak of the tow truck on rim.. kause if it is wow .. shocked .. nice job
I personally think the batteries are comedic gold, it’s a very nice subtle touch to the build.
So, when you drive the car on the streets and its raining, where does the water go then? It will accumulate a lot of water in the back of the car.
I don't know Hawk Eye make a car now, but that's a freaking cool car
Well I think it's very very dope 🔥🔥🔥🔥🔥🔥
Cyber gang
Slot or notch the tubes sonyou have a repeater location when fitting and black pixel out edge the perspex underneath like they do on real glass so you do t get any heat warping in the sun. Looks proper then toi
One thing I could recommend when you're spraying paint is never lay the first layer thick. Same thing with primer. It'll prevent streaks, bubbles, and runs. Get a thin coat that you can see through, then wait until the paint is tacky, then do a good, thick second layer. It helps the finish a lot. I love the textured finish you have for this part of the build but say when it comes to painting the car itself, the extra step will pay off.
I had same crack reaction because of using 2 coats of diffrent spray paint. Would look cool to sand the red and leave it black with red in the craks than clearcoat😅
I think it’s a decent idea because like what else is there to put there right? But I think it was poor execution. All this elaborate work and you want plastic tubes? I would’ve gone for aluminum for a way better “feel”. I say feel as I’m sure not many people would notice the difference it would just be one of the small things that you know about and (maybe) feel better about. And then you can also get it powder coated and have everything look way more premium. Not to mention who knows how that paint on the plastic will hold up in the long run with how much sun exposure that location of the car will receive. I also think that if you did WHITE led lighting for the Tesla logo cutouts and give them more of a purpose by making them react with your different headlight modes, flashing/pulsing when you lock/unlock the car, flashing red with the panic button/alarm, etc. All of that with the addition of 2 speaker or subwoofers being mounted inside and have cutouts in your housing for them to face into the cab of the car would look very nice from the interior and also elevate the function of it all. Over all it’s your car and your project and if it makes you happy then great, but in my opinion (and apparently many others) this is not it…BUT if you used this as a “rough draft” so to speak then I believe you could really build and expand on this idea
Well done.from Russia with love
A vault cover to mimic the rear of the cyber truck would be cool
I dig it man! But needs a positive + and negative - on each end of the batteries lol
I think it would have looked a million times better if you had done an infinity mirror section on that back piece.
Какой крутой проект, уважение за такие труды!
Switch it for plasma tubes they're basically lightning in a tube. Like those plasma balls you had as a kid
it looks cool buttt, my suggestion is that the paintwork should probably be cleaner because tesla cars if you notice are very minimalistic and the paintworks are very clean and shiny i suggest that instead of it having textured paint it should instead have clean and smooth and glossy paintwork, kinda like the sticker (if you want to keep it since there are a lot of negative reviews on that ) btw i think its better if you use white light instead of red instead the red one is pretty unnoticeable, and i think it would've looked better if the letters are vertical, and what if it actually has batteries but for the cosmetic lights and stuff that you are probably gonna add in the future? btw if you want to paint on plastic you should sand it first so that the paint stays longer.
I like the cosmetic batteries 🔋🔋
Yore doing it right, you had an idea and you like it, there's always some one eith criticism, butvyour car, your rules 💪
Pls What's that song at 6:37 ?? I freestyled so hard on it
I kinda somewhat like the look of them, making it look like a toy car, but make them into speakers and give some use for them.
Sick build the red tubes imo should've been frosted clear with leds
This is super awesome and all, but what's really at the forefront of my mind is the question of why you look like Pedro Pascal and Michael Schumacher managed to conceive a baby together.
I like the battery tube look but it would have been better to light them up with white lights not red. When you used the flashlight it made the logo pop but with the red lights you could barely see the TESLA logo.
Personally I like it, I see a lot of people hating on it but I still think it’s cool.
You will only be able to see the beauty it adds after he paints the car.
Tubes look cool but def would have preferred them being smooth and glossy. You know like batteries? 🔋
Im not a big fan of Electric cars but this thing ist Fire🔥
Proud if this work, Sema Worthy.
Hey, just watched majority of the roadster content on these past days.
Let me tell you, excellent work! One of one ! You've made a esthetic that is super enjoyable.
Got to this episode, where you got the idea of these tubes. Wonderfull to see how you surpass things in your way and how you so creative as well.
The way you texturize it and how it turned out was cool.
But for me they dont fit the car, they take away all the past esthetic you've created for the roadster.
Another think that bothers me in them is the way you read the "Tesla" , facing frontwards to the car it is confusing for the simpliest rules of reading from left to right.
Sorry for the big comment, but I think this is a project so amazing that all inputs will be good for it !
Batteries looks lamd my brother. Rest is awesome.
would look dkin cool as dual AA duracel pack
I think you should’ve did the Tesla lettering down instead of across. But it still looks good tho.
You should change the red lights to white.Great work
I wish you could’ve turned the Tesla logo into an ambigram.
You know what would be sweet? If those two cylinders were able to have a lighting effect that portrays some type of ‘energy’ wave travelling through them. Imagine something like the Aurora Borealis (able to change colour of course) or like a plasma wave.
A sort of carbon carbon cover with two symmetrical bumps would look amazing in that place. You can make the form and then have it custom made in carbon fibre.
Maybe you want it to be 100% own work but I think that would be the best solution. The car in general should have some carbon parts/details though imo
Why you didn't use this pipes as a way for creating more downforce by making a channel from front to the rear?
That car is awesome bro... I think to keep with the Tesla theme... You should have made Tesla coils inside of their
Now if you ever get an air bag set up on her you know where to put the tanks
I would exchange that for 2 air tanks and have some air ride...
They look sick, people don’t know the colour of the vehicle and it’s painted and when it’s done I’m sure those will pop really well with it.
The idea is cool just take this recommendations leds must be white and the texture of those batteries could look better if they are smooth and glossy
What's the name of the last song?
That dirt was good fortune
I really wish for them to be super capasitors
arent roadsters convertibles? wouldnt this be a coupe?
Definitely change those tubes for a sub or something
Busted!
Would be cool if you incorporated the actual battery life into what you did but inside the tubes and them be clear tube, so you can turn car on and literally show your batteries are charged n ready to race lol
I think you need a metal wrap like the cyber truck
Will water pool up in that area
You should have them light up or somthing when you turn on the car
How much would it cost for you to build me one ?
Maybe swap out those single color leds to a rgb led with a pcb board that goes from red-green and then incorporate battery percentage (red=charge green=full battery)
A real functioning batteries would be nice 😅 btw built is going awesome 🔥🔥🔥
One thing you can do to save this is really add some more techy looking stuff around the better use the whole chamber looks empty and weird imo
muito top esse Projeto parabéns...
Better off putting a fire extinguisher back there and call it a day. Throw a "break in emergency" sticker on there for fun.
Was expecting "cold gas trusters"
You should paint them like AAs