Super good use of the flathead and closed end of the wrench for the spring. I knew I didn’t need a hydraulic press and a bearing puller for this job lol
I have that metal line attached to my hpfp and I need to remove my valve cover so I can change the gasket sealant. I was hoping that nut would pull away from the metal line because the other half is connected under the intake manifold and I really didn't want to remove that too. Thanks so much for this video.
I’ve got a 2020 Macan using the same EA888 that seems like has a sealed HPFP. Doesn’t have that large hex cap. Is there an actual HPFP upgrade instead of just the internal?
@@charliemeyer7912 not true..it need tune..because every stroke pump pumps more fuel as with ori piston...u need tune it otherwise u can have rail pressure issues
Si vous n'avez pas de pompe HP, alors le stage 2 a été obligatoirement limité par le mappeur. Après le montage, l'interet sera justement de revoir la carto pour aller chercher 25-30cv en stage 2+
Super good use of the flathead and closed end of the wrench for the spring. I knew I didn’t need a hydraulic press and a bearing puller for this job lol
I have that metal line attached to my hpfp and I need to remove my valve cover so I can change the gasket sealant. I was hoping that nut would pull away from the metal line because the other half is connected under the intake manifold and I really didn't want to remove that too. Thanks so much for this video.
What's that other hose on the side my gti don't have that hose on my hpfp
I’ve got a 2020 Macan using the same EA888 that seems like has a sealed HPFP. Doesn’t have that large hex cap. Is there an actual HPFP upgrade instead of just the internal?
This video is well put together
what will this upgrade do?
This we let you run full e85 fuel, with the proper tune of course
does this upgrade require a tune?
No custom tune required unless your looking to run E
You need to reflash your tune to specific fuel like e50, e85, etc
@@charliemeyer7912 not true..it need tune..because every stroke pump pumps more fuel as with ori piston...u need tune it otherwise u can have rail pressure issues
@@TheLudbe you can run it without a tune though you may run into issues you may not
@@charliemeyer7912 if u log rail pressue and fuel trims u will see why it must have tune after changing pump!
Je suis en stage 2 sans hpfp.faut il retoucher la map apres cette installation ?
Si vous n'avez pas de pompe HP, alors le stage 2 a été obligatoirement limité par le mappeur. Après le montage, l'interet sera justement de revoir la carto pour aller chercher 25-30cv en stage 2+
@@allstarsmotorsport je peux avoir 25-30cv supplementaire avec le kit autotech ?
Thank you very much
Préndelo