I actually tried reversing the bridge pickup like you said in the comments it really didn't make much of a difference. However if you have any q if you pull out the 2.5 k you will get basically this tone
Make sure your OUTER coils are working. This changes the whole game But there were some few trb1006 models that had this setting as default. Most of the times both coils turned on one side. Both on bridge side or on the neck side.
Hi @@alexeyzavolokin, Your tone is super cool on this video. Could you explain what you mean with both coils working? How can one verify whether that's the case in a TRB1006J? Thank you in advance. Yoshua
@@yoshuanava hi. Please read all comments to this video. I already explained step by steo how to get the best sound out of this instrument just leaving stock electronics.
you have a perfect tone, are you using a pickup in addition to the guitar, 3 of them are visible from here and are you using a mark bass that you turn around and tune? how do you get so many mids and highs I have the same model, but it sounds very dull, there are not enough mids and highs
Hi. Thank you. Here's stock pickups and preamp. But bridge pickup is reversed. This is the key to the better sound. Sound recorded direct into interface. Please read my response to other comments to this video for more info. Best regards.
Wow..I just say wow. I still can not understand that tone on Yamaha. Is that made in korean Yamaha or indonesia made trb? I want to buy TRB1005j which made in indonesia. I wonder if you can teach me how did you make the grate jazz bass slap tone. Use Pick up balance knob can make ..? More use front pick up? Rear pick up?
Hi. The first and the best thing you can do to improve the tone is reverse the pickups so coils should stand on outer sides. The factory setting is usually both coils turned to one side. This makes sharp and thin sound. Just try and you'll hear a huge difference in tone!
@@alexeyzavolokin first, thanks for your reply. So you mean, swap front pick up backwards, rear pick up forward? Or rotating up and down (180 degrees) on each pick up? As you say, it's not a matter of trb1005 or trb1005j itself. Actually I'm hesitating to buy between old trb1005 and 1005j made in Indonesia.
@@basskid_doctor these pickups are single coil with dummy coil which don't sound but reduces the noise. Working coil is on one side of the pickup,dummy coil is on another. So take the screwdriver and touch the pickups while bass pluged in a amp. This will help you to find on what side the working coil is. Then you have to reverse the pickups so neck pickup coil will be closer to the neck and bridge pickup closee to the bridge.
I have reversed my bridge pickup then I found a different sound and for me it sounds great! It wasnt possible reverse the neck pickup because the cable is not long enough :/ Did u reverse both? Thank you for the tip!!!!
@@alexeyzavolokin Лёша это конечно не критично, просто эта суета начинается когда надо и ноту ткнуть и от грамкости ухо режет и регулятор скорее крутнуть. Так сказать проскочить между ёб. ных. Думаю это приятное чувство всем знакомо.
Wow, not the sound I was expecting from that Yamaha. Amazing tone
Without looking, I would've thought it was a Fender! Great tone and playing sir!
Thank you!
Wow amazing just a fender sound out of that yamaha😍
Yeah. Here's stock electronics
Belleza
The first time I've heard the riff played right ...👍
Very impressive! Sounds so good! Well done brother!
Awesome playing dude! If i closed my eyes i would think its a super compressed 60s jazz bass!
Thank you!
Одна из любимых вещей в этом жанре! Жаль, что только фрагмент...
Awesome playing with this very nice sounding bass ! Well done ;-)
Thank you. Glad you like it!
Excelent! Great jazz bass tone 👍
Thank you!
Killer Alex !!
Клёво 👍👍👍👍👍!
Спасибо! 🤘🎸🔥
wow...
I actually tried reversing the bridge pickup like you said in the comments it really didn't make much of a difference. However if you have any q if you pull out the 2.5 k you will get basically this tone
Yes. Mid cut make sense. I usuallly cut from 1,5 to 2,5 aproximately.
Make sure your OUTER coils are working. This changes the whole game
But there were some few trb1006 models that had this setting as default. Most of the times both coils turned on one side. Both on bridge side or on the neck side.
Hi @@alexeyzavolokin,
Your tone is super cool on this video.
Could you explain what you mean with both coils working? How can one verify whether that's the case in a TRB1006J?
Thank you in advance.
Yoshua
@@yoshuanava hi. Please read all comments to this video. I already explained step by steo how to get the best sound out of this instrument just leaving stock electronics.
@@alexeyzavolokin Sorry and thank you. Writing early morning I scrolled too quick and missed the replies which answered that question 🙏
It's a trb with fender preamp and eq , you can see there's an extra pick up attached
Hi. No extra pickup, this is slap ramp. Just stock electronics.
🔥🔥🔥🔥
Какова сила авторитета Алексея! Тут же заказал в Озоне DR lo rider nickel, потому что это его любимые струны, по его ответу в комментах!
Правда очень классные струны,рекомендую. Не являюсь эндорзером.
Man, what a tasty sound!
How do you get the perfect tone just like Marcus Miller?
Are you using Marcus Miller signature strings?
Thank you! It's just the right pickup placement and some eq corrections. Strings are DR lorider nickel. Best regards!
@@alexeyzavolokin Thank you! Also great playing!
How i can get this tone from my yamahatrb1005j bass
@@isurusanjaya236 Just reverse bridge pickup. And install new maple neck.
今日 trb1006J を買って リヤピックアップをひっくり返したら本当に音が変わった🎉。 ヤマハなのに出る音は フェンダーの70年代ジャズベースっぽい😮! ありがとう。
ただ ネジ穴を新しく開けなければならなかった。
Hi. This is 1006 old Korean made.
Да так я могу)) Промокашка. А ты Мурку сможешь?)))
Легко. Вы просите или заказываете?
you have a perfect tone, are you using a pickup in addition to the guitar, 3 of them are visible from here and are you using a mark bass that you turn around and tune? how do you get so many mids and highs I have the same model, but it sounds very dull, there are not enough mids and highs
Hi. Thank you. Here's stock pickups and preamp. But bridge pickup is reversed. This is the key to the better sound. Sound recorded direct into interface. Please read my response to other comments to this video for more info. Best regards.
Wow..I just say wow.
I still can not understand that tone on Yamaha.
Is that made in korean Yamaha or indonesia made trb?
I want to buy TRB1005j which made in indonesia.
I wonder if you can teach me how did you make the grate jazz bass slap tone. Use Pick up balance knob can make ..? More use front pick up? Rear pick up?
Hi. The first and the best thing you can do to improve the tone is reverse the pickups so coils should stand on outer sides. The factory setting is usually both coils turned to one side. This makes sharp and thin sound. Just try and you'll hear a huge difference in tone!
@@alexeyzavolokin first, thanks for your reply.
So you mean, swap front pick up backwards, rear pick up forward? Or rotating up and down (180 degrees) on each pick up?
As you say, it's not a matter of trb1005 or trb1005j itself.
Actually I'm hesitating to buy between old trb1005 and 1005j made in Indonesia.
@@basskid_doctor these pickups are single coil with dummy coil which don't sound but reduces the noise. Working coil is on one side of the pickup,dummy coil is on another. So take the screwdriver and touch the pickups while bass pluged in a amp. This will help you to find on what side the working coil is. Then you have to reverse the pickups so neck pickup coil will be closer to the neck and bridge pickup closee to the bridge.
@@alexeyzavolokin thank you very much. I will try it
I have reversed my bridge pickup then I found a different sound and for me it sounds great! It wasnt possible reverse the neck pickup because the cable is not long enough :/ Did u reverse both? Thank you for the tip!!!!
Great! Whats the effects procesor your bass is plugged to?
Thank you. It is recorded direct. Compression and eq added later.
How do you eq the bass and amp?
@@Alexmayor007 hi. Just a little boost at 150-200 hz and cut at 1-2 khz.
Maple?
Yes sir. Custom built maple neck.
Педали громкости не хватило. Я всегда пользуюсь.
Согласен. Теперь пользуюсь tc spark booster для этого.
@@alexeyzavolokin Лёша это конечно не критично, просто эта суета начинается когда надо и ноту ткнуть и от грамкости ухо режет и регулятор скорее крутнуть. Так сказать проскочить между ёб. ных. Думаю это приятное чувство всем знакомо.
what the meaning of reverse pickup sir? is it really big affect or change the tone so much? i want to purchase trb1004j
Yes it changes the sound absolutely. It brings jazz bass character of sound.
@@alexeyzavolokin its just replace the position or need to soldering inside sir?
@@yosafatagape just reverse it. Take tje screwdriver and touch pickups when bass is plugged in. You'll find which side the coil is.
@@alexeyzavolokin tried reversing the Pick up,as it's a 2/1 screws, you do need to drill extra holes,in the pickup cavity.
what strings do you use ?
Hi. These are my favourite DR Lo rider nickel.
What witchcraft is this? I'm hearing single coil tone Jazz bass on steroids through a TRB??
친구 자네가 연주한건 야마하지 펜더가 아니라네;;; 어떻게 야마하에서 저런 소리가 나오지? 비법이 뭔지 나에게 알려줄수있나 : )