The notches do not line up like that. Check the video of the way they where in there before you pulled them out. You now have one facing the wrong way. In order to get the flow arrows to point the same direction, you need to flip one over. The way you did it your flow arrows are facing opposite directions.
Most of the stuff is easy to work on the 2.4 liter engine but the starter is a nightmare and the thermostat not really that hard justgot to remove a lot of shit to get to it
Ok just got a surprise in my 2000 Nissan Frontier. Turns out it's a sealed unit. Where the clips would be it's all one continuous smooth piece of plastic shielding. So ... guess I'm done.
From what I read on the web, in your model year you have to actually cut the slot for the filters. Let me check my shop manual and see if it gives any details.
Just got a 2002 frontier. I must have a different model. I took mine off and no slots for filters. I will have to take the whole housing off. It is in 2 pieces. I got some of the screws out and pulled it open a little and it looked like one big filter. Seems like a pain in the ass just to get to a filter. Didnt have time to deal with it yet.
Same here. No clip, no slots. Peered inside with a screwdriver prying open the housing and said meh, never mind. I don't think this was made to be changed in this model. Oh well!
Hey my truck doesn’t even have filters there a plastic piece there what do I do at that point some told me it doesn’t need a filter and others tell me to break it off do you know what I should do
I have an 03 Frontier and have been thinking about doing this...so I call the local Nissan dealer yesterday to see if they had the part..and the parts guy tells me my truck doesn't even have one. Is he just stupid or my 03 really doesn't have one? It's am 03 Desert Runner.
It is possible that your model does not have the filter. The best way to tell is to remove the glove box and look in the middle for the clips. There are some videos out there for people who have cut the blower motor housing to put in the filter. It is my understanding that there is an outline of where the filter should go, but I personally have never seen it.
I see in numerous catalogs the filter that it should take. ..and my dealers employees aren't the sharpest tools in the shed. Guess I should look for myself. Thanks
@@Monica-vc3tu Well mine had none...took the glove box out and checked....maybe cuz it was a base model desert runner..an XE....the higher model trims did have them.
My 2001 seems to have a different box, with no slide out filters...total PITA. Apparent;ly you have to pull seven screws to open this ...safe, but you can only see five, and there's no damn mention of its installation in the manual. I could see my filthy old filters but could NOT get them out. burned a sweaty hour and got NOTHING done.
Looks like you have to cut the slots out on some models and mine is the same way. Found a video to do it. ruclips.net/video/W5HMWHopY2w/видео.htmlsi=XGriL6eQLvCofDUx
Sorry for the delayed response, we have been getting ready for hurricane Michael. Awesome, I am glade you were able to locate the filter location and get some new ones in. Too bad someone before you removed them and did not replace them. Have a nice day.
Thank you for this video, because I had no idea how to change the Cabin Filter. Again thank you!
Thanks so much! I didn't even realize I could get my glove box out. This will help me with another project!
Thank you for the comment. Best of luck to you.
VERY HELPFUL !! I have a Nissan Frontier which is similar to Xterra. Thanks and keep up the good work 👍🏼. You have my like!!
Thank you! Saved me the hassle of looking for it myself 😅
Glad it worked out for you!
The notches do not line up like that. Check the video of the way they where in there before you pulled them out. You now have one facing the wrong way. In order to get the flow arrows to point the same direction, you need to flip one over. The way you did it your flow arrows are facing opposite directions.
Truly thank you, I tried to do it myself. Sadly I didn't take off the entire glove box housing.
Glad it helped
GOOD VIDEO DID NOT KNOW XTERRA HAD CABIN FILTERS ....THANKX A MILLLION......
Depends on model. Thanks for watching!
To clear out the debris left in Air box, start car, turn on fan to high and watch the tornado of stuff come out... Then use your shop vac....
That's awesome still have original filter in my 2002 frontier 😹
Thanks!
Thanks for this video
Very helpful! Thanks!
Excellent!!!
No, I did not. I stopped working on the project some time back. I need to get back on it. I believe I shorted the pins.
Tengo una nissan frontier 2005 se y no tiene eso para cambiar, donde lo podría tener?
obrigado,seu vídeo foi de grande ajuda.
Gracias
You are very welcome.
Good good
why isnt the rest of the car that easy to work on?
I agree.
Most of the stuff is easy to work on the 2.4 liter engine but the starter is a nightmare and the thermostat not really that hard justgot to remove a lot of shit to get to it
I think I see a Harbor Freight portable flashlight in this video!
I have a dozen or so.
It will be similar to the nissan frontier year 1999 and been looking for and can not find it
Exellent video explanation, dude
Thank you.
Thanks buddy you video save me money
Your welcome.
Thanks -- this was helpful.
Thank you
Ok just got a surprise in my 2000 Nissan Frontier. Turns out it's a sealed unit. Where the clips would be it's all one continuous smooth piece of plastic shielding. So ... guess I'm done.
From what I read on the web, in your model year you have to actually cut the slot for the filters. Let me check my shop manual and see if it gives any details.
Can you post a picture of what your box looks like?
Yes...as soon as I figure out how to put a pic on youtube..
Thanks man GOD bless u.
Thanks
You're most welcome.
Gracias 🙏🤗🇩🇴!!!
You’re most welcome!🤗
Just got a 2002 frontier. I must have a different model. I took mine off and no slots for filters. I will have to take the whole housing off. It is in 2 pieces. I got some of the screws out and pulled it open a little and it looked like one big filter. Seems like a pain in the ass just to get to a filter. Didnt have time to deal with it yet.
Same here. No clip, no slots. Peered inside with a screwdriver prying open the housing and said meh, never mind. I don't think this was made to be changed in this model. Oh well!
@@mzskunkI have found a video where you have to cut out the slots and add the filters. ruclips.net/video/W5HMWHopY2w/видео.htmlsi=XGriL6eQLvCofDUx
Thank you
You're welcome
Foi muito útil, obrigado!
Obrigado. Eu não falo português, espero que esta tradução esteja correta. Tenha um bom dia.
Hey my truck doesn’t even have filters there a plastic piece there what do I do at that point some told me it doesn’t need a filter and others tell me to break it off do you know what I should do
You have to cut out the slots and add the filters. Found a video how to do it. ruclips.net/video/W5HMWHopY2w/видео.htmlsi=XGriL6eQLvCofDUx
I have an 03 Frontier and have been thinking about doing this...so I call the local Nissan dealer yesterday to see if they had the part..and the parts guy tells me my truck doesn't even have one. Is he just stupid or my 03 really doesn't have one? It's am 03 Desert Runner.
It is possible that your model does not have the filter. The best way to tell is to remove the glove box and look in the middle for the clips. There are some videos out there for people who have cut the blower motor housing to put in the filter. It is my understanding that there is an outline of where the filter should go, but I personally have never seen it.
I see in numerous catalogs the filter that it should take. ..and my dealers employees aren't the sharpest tools in the shed. Guess I should look for myself. Thanks
I removed the glove box and from the video where they are supposed to be, there is no clip and no filters !
Mike Brewer according to CarGurus a 2003 Nissan Frontier has a double filtration system. There are two cabin air filters.
@@Monica-vc3tu Well mine had none...took the glove box out and checked....maybe cuz it was a base model desert runner..an XE....the higher model trims did have them.
how do you turn on the stereo?
Push the knob on the left
hello i have a question for you
Yes, what's your question?
thanks !
Thank you for the reply.
My 2001 seems to have a different box, with no slide out filters...total PITA. Apparent;ly you have to pull seven screws to open this ...safe, but you can only see five, and there's no damn mention of its installation in the manual. I could see my filthy old filters but could NOT get them out.
burned a sweaty hour and got NOTHING done.
I have been super busy with work, but I will try to look at the service manual for you this weekend.
Looks like you have to cut the slots out on some models and mine is the same way. Found a video to do it. ruclips.net/video/W5HMWHopY2w/видео.htmlsi=XGriL6eQLvCofDUx
Crew cab has them. Extended cab does not
My 2002 frontier has no in cabin air filter!!!
Yes, that can be the case depending on which model.
2001 nissan
2002
hair in the way
Took mine out and there wasn’t even one installed :o
Are you the only owner? It could be someone took it out in the past and just did not want to put a new one in. I remember these use to be expensive.
Razor Bucks no I’m the 3rd owner it’s about to have 200K miles but I’m gonna go buy one and install one 👍
Sorry for the delayed response, we have been getting ready for hurricane Michael. Awesome, I am glade you were able to locate the filter location and get some new ones in. Too bad someone before you removed them and did not replace them. Have a nice day.
Razor Bucks no worries thank you for the video!! And I wish for you and your family’s safety.
Thank you.