I don't need this but I had bought the Camry V40 from 2007 from Canada and he comes to here in Germany. I'm happy he have power super Quality!!! Nice Video and great day I wish!!!
I will be doing this soon on my Mitsubishi Outlander Sport. Just a question Ali, I see that I need to add 1 liter per 500km. Is there a way to slow the oil burning down
Great job using Aliexpress! did you but the hoses from there also? u have a link?? I am looking to buy a replacement evap hose that comes from the throttle body for my 2008 camry but cant find the number and trying to see if i can retrofit with a similar hose cut to size..
Hey @AliMECH Will the position/height of the oil catch can matter? I am australia. For me, the brake fuild reservoir is on the left where you installed your oil catch can and there's not enough room to install the oil catch can. So, I was thinking of moving the catch can to the right (where USA models have brake fuild reservoir ). Do you think it will be okay since there will be long hoses and the catch can on the right side?
Great video Ali! I own a 2015 camry myself and i have been learning a lot from ur videos. Would like to see a valve carbon cleaning video if u can that would be awesome
@@AliMECH I see people instal duel catch cans. Are you going to do the same as well? I want to do other things to my camry like lowering it and stuff like that so if you make videos that would be awesome
Thanks for this good content video. Can I install this device on diesel engines? I have a car (Opel zafira tourer c CDTI 1.7) year 2017 with direct injection engine from General Motors. Thank you again.
Do you have any chance to show me where i have to connect the hose system in to engine bay of Honda Hrv 2016 lx canadian model ? r18 engine type like honda civic. The intake manifold is close to The firewall and i bet is tricky to find the right in and outline. Thanks bro
I had install same unit in vios, by my experience is collect oil 30cc per 5000km. My unit is leave engine away 30cm close to car head. I think your unit is too close to engine, the heat make unit can't cooling down oil gas and catch in unit...
For the people that live in wintery/snowy environments - your catch cans may freeze clogging your baffle/filter and can cause engine seal damage as your PCV will not be able to breath.
So in instead of burning the little bit of oil, you catch it in a can that you have to empty and maintain? On cars that are DI only I can see it being slightly beneficial. If you have port injection, its a waste of time.
I have the same exact one. I added stainless steel wool in the upper part of the canister to help catch those vapors. Seems to work better with it.
U just showed me how to reach pcv valve by removing bracket out the way your awesome dude
Thanks for watching
I don't need this but I had bought the Camry V40 from 2007 from Canada and he comes to here in Germany. I'm happy he have power super Quality!!! Nice Video and great day I wish!!!
I will be doing this soon on my Mitsubishi Outlander Sport. Just a question Ali, I see that I need to add 1 liter per 500km. Is there a way to slow the oil burning down
Great job using Aliexpress! did you but the hoses from there also? u have a link?? I am looking to buy a replacement evap hose that comes from the throttle body for my 2008 camry but cant find the number and trying to see if i can retrofit with a similar hose cut to size..
Hey @AliMECH
Will the position/height of the oil catch can matter? I am australia. For me, the brake fuild reservoir is on the left where you installed your oil catch can and there's not enough room to install the oil catch can. So, I was thinking of moving the catch can to the right (where USA models have brake fuild reservoir ). Do you think it will be okay since there will be long hoses and the catch can on the right side?
Great video Ali! I own a 2015 camry myself and i have been learning a lot from ur videos. Would like to see a valve carbon cleaning video if u can that would be awesome
Thanks, I have that in plan too, I will do that video
@@AliMECH why you install it there? I see people install it from the between intake manifold and pcv valve. Is that where it located?
Yes it's where I exactly installed
@@AliMECH I see people instal duel catch cans. Are you going to do the same as well? I want to do other things to my camry like lowering it and stuff like that so if you make videos that would be awesome
Thanks for this good content video. Can I install this device on diesel engines? I have a car (Opel zafira tourer c CDTI 1.7) year 2017 with direct injection engine from General Motors. Thank you again.
Yes, absolutely, you will see some oil been catched every month
Thanks alot
I be been waiting alot for this vedio
And i wanna put it for my FJ cruiser
Thanks, I know 🙏
Do you have any chance to show me where i have to connect the hose system in to engine bay of Honda Hrv 2016 lx canadian model ? r18 engine type like honda civic. The intake manifold is close to The firewall and i bet is tricky to find the right in and outline. Thanks bro
Thanks...would be nice if car manufacturers would install them as standard equipment on car
That would be cool!
Very excellent do you think it is useful or not and do you see a change in the car
I think it's useful, I always see some oil in it, without this, that amount oil will burn in the engine and build up carbon
Thanks a lot, i learn so much from your channel. Keep it up 👍
Thanks, happy to hear that
bravo. the only problem is that i have Prado 4L. not camry but i sort out thing according . bithaway mechanism is same almost
Thanks, it will be the same process for sure
I own a 2020 camry the same engine. I bought a occ kit but I don’t now if it’s good for the car. So what are you thinking is it good or not. ❤
It's very good, because I always watch how much carbon builds up on piston with camera, after installing oil Catch can, it's much less now
Great video but I have a question can I put it on a carburetor engine?
Yes, you can
Amazing video... Keep them coming.
Thanks 🙏
do you recomend using this oil catch can with the normal injectors (not the direct injector)
Yes, I will install the other on in-direct fuel injectors as well
Can this be put on any car?
Yes
I had install same unit in vios,
by my experience is collect oil 30cc per 5000km.
My unit is leave engine away 30cm close to car head.
I think your unit is too close to engine, the heat make unit can't cooling down oil gas and catch in unit...
Здравствуйте!не подскажите что это такое?как я понимаю это фильтр картерных газов?
For the people that live in wintery/snowy environments - your catch cans may freeze clogging your baffle/filter and can cause engine seal damage as your PCV will not be able to breath.
This is a new technique!
Very helpful
Glad it helped
Thanks for the video
You are welcome
Interesting, first I learned of this...thanks
Thanks for watching
How many miles were driven during those 28 days?
I think it was about 2500mil
دەست خۆش برا ماندوو نەبی
So in instead of burning the little bit of oil, you catch it in a can that you have to empty and maintain? On cars that are DI only I can see it being slightly beneficial. If you have port injection, its a waste of time.
Even if its port injectors, they eliminate the injector tip to be free from that boring oil while the intake valves been washed with fuel
Did this to.my VW Golf Mk1
Awesome, did u notice any change
You know there are 2 crank case breathers don't you?? the second is right on top of the engine, between your rocker cover and plastic air intake pipe.
I wanna do this to my car but afraid to mess up
Great 👍 👌 👍
Thanks
👍
Bruhhh all car can use this?
sure
I found this video now 🤍
No problem
@@AliMECH I appreciate your efforts. Really you're smart and genius, do things in easy and correct methods
Thanks for watching and supporting me 🙏🙏
Can i use it in diesel engine?
Yes for sure