Sending GPS location data over GSM | Proteus Simulation
HTML-код
- Опубликовано: 12 сен 2024
- You can follow this tutorial to fetch GPS data from GPS module and send it over a GSM module. By using this code , you can send gps location using sms. for code visit
www.theelectro...
Download Gsm Library : www.dropbox.co...
Download GPS Library: www.dropbox.co...
GSM and GPS Library By : www.theenginee...
Original Content by Satyam singh
Could you please explain the working of the code and as to how the lat and long changes?
sir,still i didnt understand how did u copy the code into arduino uno. could u please help me how to copy the code into my arduino.
Check my video "how to generate hex file location in Arduino ide"
Thank u so much,,this is so much helpful for me..............
Thank you so much 💞💞 from Algeria 💖
Your welcome
Everything is working well thank you sir...but how can I send the message? Is there some sort of code or message needs to be send first?
sorry. i know it late. but in my srduino ide i think there is no tinygps library. can help? thanks
I had sim800A GSM module.....Can I use same code for that?
Yes, you can
Helpful! but i want to control using push button that means i want to send when i want ?
i am using gps neo6m also can work?
Yes, it will work
Thank You
Satyam Singh
Your welcome, please don't forget to subscribe my channel.
@@SatyamsinghYT done. Thankss
Sir,Virtual terminal is not opening in my software.
While running the program...im getting an error..unable to open hex file
Please add hex file location in gsm module.
Oh Thankyou!
Please subscribe channel. THANKS
@@SatyamsinghYT I am already a subscriber 😁
Bro... This is showing... AVR: program property is not defined"????
You need to provide hex file to arduino, please re-watch video
@@SatyamsinghYT actually scene Kya hai ki.... After compiling ... It is showing file in. .elf form
There is no file in hex.. What to do?
Enable compilation from file menu- preferences then tick compile, then rebuild
the folder or file not found i have upoloaded gpsplus library and ol others why code doesnt wrk??????????????????????????????????????????????????????????
Use tinygps not gpsplus
is it okay that the virtual terminal is constantly running outputting the coordinates each time?
Yes it is, it's nmea data comes every 1 second.
How u remove that engineering Project logo
hello.. can you please tell me at where I can get tinygps library
TinyGPS.h: No such file or directory.
This error will show on compiling
your suggestions helped me a lot. but my simulation is continuously running. It didn't shows the display of virtual terminal.
Can you share screenshot on instagram @ioturtle
@@SatyamsinghYT
Problem solved sir.no problem,
thank you for asking.
hello , can you please help me as my simulation is running but showing error Simulation is not running in real time due to excessive CPU load
Is this gps coordinates are random or it is exact location? And how to store this coordinates in local database using simulator it is possible?
Exact location, and to save this location, you have to make an window application to receive data from serial port and then upload it to your database
@@SatyamsinghYT thank you👍 can you mail me project file please!!! himanshunikam21@gmail.com
I don't have project file, but you can find source code and library file in description
GSM module library plz ?
can you please provide codes which you have used in the GSM module?
www.dropbox.com/sh/vvuorpz5vahs20l/AADL3CjoPsGEhCmJfqbX1fUra?dl=0
could you please suggest how to add a password based door locking system to this?
Sir, im getting "simulation is not running in real time due to excessive CPU load" error.How to fix this?
Ignore this error, simulation will work fine
How can I get that .ino.hex program file because after compiling it shows only done that
C:\ path in .ino.hex iam not getting can you help me in that plzz
Please enable compilation option in file menu, then preferences. Then recompile the code
Hi Can I ask you! How Can I change the default location for GPS module
Use vgps in proteus 8.9
I can not understand bcoz when we use gps module separatly we define tx rx of gps so why we can not in it
shruti jain because there is only one hardware serial on arduino uno, so we create a virtual serial port using software serial library, here we define 2 pin , which act as rx and tx.
I need another favor please. when I run the code in arduino uno software. It shows "Tinygps.h : no such file or directory". what should I do now.
Install tinygps library from Arduino library manager
And please don't forget to subscribe
sir, but in my proteus simulator it shows there is no component for sim900A. can u please solve my problem
You have to manually add sim900 library in proteus
Can you please help me combine this GPS GSM model with heart rate sensor
Sir , I am getting this error Simulation is not running in real time due to excessive CPU load can you help me
Ignore that error, simulation will still run
@@SatyamsinghYT yeah sir , simulation is running but i want the lat and long to be visible on virtual terminal can you please help
Yes, Actually you closed the terminal while simulation was running, to re-enable it, go to debug menu and on bottom select the terminal again to re-enable it. Nothing is wrong with the simulation
@@SatyamsinghYT thank you
Hello, im trying to do this same project at the physical arduino hardware, but the code returns only "0
0
0", Im using SIM900 with TX at pin7 and RX at pin8 and i declared SoftwareSerial SIM900(7, 8). It doesnt make sense for me. Can u help me?
Which arduino hardware you are using??? In case of mega use pin 10 and 11 for software serial
@@SatyamsinghYT Thanks for your response. Im using arduino UNO. The SIM900 is not sending the message. I dont understand.
@@icarofv use tinygsm library, and at debug example to find out baud rate of your gsm modem.
@@SatyamsinghYT it's a great idea
! I'll do it. One more question: do you know if this gps module
works with tinygps++? It doesn't give me back a signal.
@@icarofv it should work, i'll try then let u know
can you tell me please the reference of the gps i need it for my project :(
you can buy sim28 gps module from any online store, it cost around 1000 INR.
Bro iam getting "AVR Program property is not defined" error how to solve it
You need to show location of hex file for both gps and gsm as well, otherwise it will not work.
@@SatyamsinghYT yeah I applied hex files for both still it's showing same error
@@SatyamsinghYT and also how to interface our Arduino cc code into proteus software
And for Arduino??
@@SatyamsinghYT bro when i try the code its showing "TinyGps.h no such file or directory found" error what to do??
Why it just get a location in proteus. How to do taht it get the real lacation in proteus Or why showed a location in texas so if I'm in Colombia.
you can't get the exact location by using virtual gps module.
ya its just a virtual not a real one,,,,,even gsm in proteus cant make a text or call just AT commands acceptance,,,
why we dont use the gps rx,tx in program code to intialize just like use for gsm
shruti jain we are using software serial library for this
same problem
Hey can you tell why this is showing same latitude n longitude everywhere . I want to get the exact latitude n longitude of my location. How can i do that?
That's not possible with this module. You can use vgps to set your own coordinates
@@SatyamsinghYT okay Thnks🤞🏻 but for that do we need to do any changes in the code? N will this code be suitable for hardware also?
@@purvanshigupta136 no need to change anything in code, just update the value in vgps, code will automatically fetch that value
@@SatyamsinghYT thank you so much
Please don't forget to subscribe my channel
Thank you so much
Please don't forget to subscribe channel.
sera que podria porporcionar los .ex que pide el gps y lo que pide el arduino
Hello sir, i can't find the sim900a model even after downloading your libraries
Download gsm Library from : www.dropbox.com/s/hm8rhfbxm449b6p/GSM%20Library%20for%20Proteus.rar?dl=0
@@SatyamsinghYT after downloading this and pasting the files in th library, i could only find 3 sim900d models in proteus.
Oh, so only this one is available, use can test at commands on this
@@SatyamsinghYT yes sir, can i contact you in by email sir, i need help for my project.
Contact me on instagram @ioturtle
can I get code? and how the collected GPS data is interfaced with code and GSP module?
theelectronics.co.in/sending-gps-location-data-gsm-proteus-simulation/
can i contact you
hi can you send me the file of simulino library file for proteus
Hi sir in that code their is error saying amp was not declared in scope
Run proteus as administrator
@@SatyamsinghYT thanks sir
Most welcome
bro how can i add any sensor that helps us to detect that car engine is working or not in this circuit?/plz help
You can use vibration sensor to detect vibration
The code link is not working !! Could you please send me the code I can get some idea for my project !!
+Mourad Elloumi site is down, because we are migrating our website.. plz send a mail @ satyamkr80@gmail.com , so i can send u the code.
Satyam singh could you please send the code to me partha.erp@gmail.com
sir i can't find arduino code it showing me fpga error
can you send me the codes and how to save and upload it
A hex file is already supplied with the library folder. Use those for gsm and gps
There is a error saying it can't be run because of CPU overload can anyone help
Will it work on any gps module
yes
can you share this library cause im not getting it on my software
You can download it from theengineeringprojects.com
thanks
Hey, thanak for this wonderful simulation, it works so well in my software. Can you please explain me, I have given my no in the code while running, then why am I not getting the sms?
Hi, this one is a virtual module, not actual, you can only see output of at command, not sms. If you want to receive sms, use real module on usb port and use compim to attach it with simulation
@@SatyamsinghYT understood, thanks a lot!!
Please don't forget to subscribe channel
halo can you help me with simulation you use ?
If we give all the code to Arduino then it will work or not?
Please explain more detail?
@@SatyamsinghYT if we upload all the code of GPS gsm and accelerometer sensor by Arduino in simulation it works or not?
@@Inspireyou1235 it will work but you are not going to receive sms from Simulation. It will just show you output behaviour of GSM module, but after uploading ot to physical hardware. It will work.
@@SatyamsinghYT physical hardware is already prepared... So it will get?
Yes, use atleast 2 amp power supply for gsm
SIr the code link is not working !! Please send me the code I can get some idea for my project !!
Dude, its working, please recheck it
yeah sorry bro
can you give me website to download GPS library please?
its just 1 bro,,,,TEP.com,,i think,,
i got this message "Simulation is not running in real time due to excessive CPU load.
" what should i do now?
Go to system > set animation options > and set it to default. Or try to remove running apps as it consume cpu usage
@@SatyamsinghYT their is no option to set as default.
Try these:
Frame per sec: 20
Timesteps per frame: 50m
Single step : 50m
Max spice timestep: 25m
Step animation rate:4
@@SatyamsinghYT it is same but not work.
Then try to remove running application from ur pc, and also set simulation option to default
Can give me some details about this project and also I need GPS module information
@sharul fikri you have to add the library in Arduino
Here is a tutorial about it hope it'll help : ruclips.net/video/15XbiwVUGI0/видео.html
Hi my Proteus is not having gps and gsm module how to add that
i updated link to download gsm and gps libraryo in description, don't forget to subscribe my channel.
@@SatyamsinghYT yes definitely I will subscribe. But One more question sir that Arduino code is not compiling on my Arduino IDE can you give us direct hex file of that code
Sure, drop your email id
For hex file you can go to file menu > preferences > then tick compilation, then compile code again
@@SatyamsinghYT chavanvivek1328@gmail.com
I will be thankful 😊
Hello sir ...can you send me code please
fake code
please can you send me the site of proteuse and libreries if arduino+gps+gsm s800
if you have it please
You can download proteus libraries from this link www.dropbox.com/sh/mwvjxgyvvaz9o01/AACetq2IEK7D6iJ7tM_VtTv6a?dl=0
hi sir i need code but in description link not opening please send code
github.com/satyamkr80/TheElectronics-co-in/blob/master/Arduino/sending-gps-location-data-gsm-proteus-simulation.ino
Don't forget to subscribe
i think my arduino liibrary is corrupt, pls i need a link to download arduino una library
Please send me a email on satyamkr80@gmail.com for link
@@SatyamsinghYT thank you for your response sir, I just sent you an email now
Didn't received any mail, please recheck mail id
ok, i just resent it
Brother... Plz provide me code of this project...
Plz provide it's urgent.. Tomorrow I have to show this project....
Plzzz help me brother
Wait 5 minutes
github.com/satyamkr80/TheElectronics-co-in/blob/master/Arduino/sending-gps-location-data-gsm-proteus-simulation.ino
@@SatyamsinghYT oh my God.... Thank you brother.. U have save my life.... Thanks a lot
Don't forget to subscribe my channel
@@SatyamsinghYT yeah.. I have already done that
Hello sir you have connected gps on 0,1 pin and gsm 2,3 pin of arduino will it work properly in real time please reply me
Yashraj Nirwan yes it will work, i am using hardware serial on 0,1 pin and software serial on 2,3 pin.
i have a real time error, what can I do? help please!
Send error screenshot to my mail
@@SatyamsinghYT give ur mail plz
@@AMina-rb9tm satyamkr80@gmail.com
I can't find uno in proteus??help anyone??
download library of uno first
Please mention your gmail.
I don't understad what he did in minute 2:20
Someone explain me please
First selected gps hex file supplied with gps library folder then click on compile button of code, after successful compilation, you will get location of your hex file. Copy and paste it in arduino. You can also find this hex file in your temp folder.
@@SatyamsinghYT Hey bro, When compiling the code, I get an error and it indicates the variable TinyGps.h in red, I copied the code several times and keep it up
@@aider9381 first install tinygps library from sketch > include Library > manage library. Then search for tinygps and install it. Then recompile the code.
@@SatyamsinghYT Thank you, but now when I put it to simulate the same thing that appears to you, it does not appear to me, but many green letters appear for a while. Help me
Can you share screenshot on satyamkr80@gmail.com
Where is you gps pin serial number???? Its not working fake
This library is not designed by me, but tx and rx pin can be used as serial.
Code not working...................please give me right code
mdraju649@gmail.com....please give me the right code....
Download .hex file for both gsm and gps library
Ok thankyou
How can I get my real location
Use vgps in proteus 8.9 , but you have to manually insert ur location inside the module. Watch my latest video "gps based vibration alert system" for step by step guide using vgps.
Okk thank you
Can you please upload simulation of underground fault Detection
I will try my best
the given link if not working
github.com/satyamkr80/TheElectronics-co-in/blob/master/Arduino/sending-gps-location-data-gsm-proteus-simulation.ino
@@SatyamsinghYT thanks alot brother. appreciate your work... 👍
@@dipto624 Thanks bro, don't forget to subscribe my channel.
Download link file hex gps and gsm
already on description
this code is fake.. it wonytwork. dont believe
Gps modules take some time to respond, and try the same code outdoor, and i am using same code in my products. So don't say this code is fake, a lot of subscribers are using the same code and its working 😊
bad tutorial
\
where can i get the code that you put in gps and gsm after connection i am using proteus 8 professional
Hex file is already available in zip file of those libraries
@@SatyamsinghYT i found it, but as i am using proteus 8 professional gps & gsm components are not exact same
I didn't get it
@@SatyamsinghYT i have other problem, the previous is solved. The arduino code is in .uno extention but the proteus asks for .hex. I tried with directly changing the extention of the arduino code to '".uno.hex"' but it is giving error while compiling
@@SatyamsinghYT can you share your instagram id ? so I can discuss problem
can you give me website to download GPS library please?
www.dropbox.com/s/vciluzav75ggzsu/GPS%20Library%20for%20Proteus.rar?dl=0
thanks satyam i get it