PLEASE NOTE THERE IS A MISTAKE AT 16:32 in loading codes IS 875 Part 1 --> Dead Loads IS 875 Part 2 --> Imposed Loads IS 875 Part 3 --> Wind Loads IS 875 Part 4 --> Snow Loads IS 1893 --> Earthquake loads
Sir I want a help I have a 2800sq feet plot jisme mera uncle aur mera pitaji ka half half part hai mera uncle rrc build kar diya hai aur mujhe bol raha hai ki meh 2feet chor kar post do what can I do in that case
Hi sir..can u pls tell me the difference between bending and deflection?.....by the way u r a blessed teacher and the best one i ever know...thanku...pls reply to my doubt
We can say that if there is bending in a structure, there will be deflection, but we cannot say that if there is a deflection there definitely will be bending, because deflection is a general term and it can be caused by various types of stresses and forces, for example even axial forces can cause deflection. Now coming to understanding bending and deflection, a structure is said to bend when there is a radius of curvature formed for the structure, where as deflection is defined as translational or rotational displacement only at a particular point of interest (point where it is to be found).
Error in 15:58 …. Codebooks • IS 456:2000 Code of practice for Plain and reinforced concrete (fourth revision) • IS 875(Part 1):1987 Code of practice for design loads (other than earthquake) for buildings and structures Part 1 Dead loads - Unit weights of building material and stored materials (second revision) • IS 875(Part 2):1987 Code of practice for design loads (other than earthquake) for buildings and structures: Part 2 Imposed loads (second revision) • IS 875(Part 3):1987 Code of practice for design loads (other than earthquake) for buildings and structures: Part 3 Wind loads (second revision) • IS 875(Part 4):1987 Code of practice for design loads (other than earthquake) for buildings and structures Part 4 Snow loads (second revision) • IS 875(Part 5):1987 Code of practice for design loads (other than earthquake) for buildings and structures Part 5 Special loads and load combinations (second revision) • IS 1893(Part 1):2002 Criteria for earthquake resistant design of structures: Part 1 General Provisions and buildings (fifth revision)
@@DCBAonline Hi sir I want udemy coupon and my doubt can I learn from beginning as I am in engineering. Can I learn from basic right? Please reply and share me udemy coupon please
RCC design can sometimes fail practically, due to cracking Steel structure may fail due to buckling in practical lives as Indian climate salt water environment can not withstand iron and form rust and low strength
PLEASE NOTE THERE IS A MISTAKE AT 16:32 in loading codes
IS 875 Part 1 --> Dead Loads
IS 875 Part 2 --> Imposed Loads
IS 875 Part 3 --> Wind Loads
IS 875 Part 4 --> Snow Loads
IS 1893 --> Earthquake loads
Sir what is difference between dead load and lmposed load
Dead load includes the self weight of the structure itself, imposed loads are the loads put over the structure.
Sir you mean lmposed load means
Live load.
Yes live load comes under imposed load
Yes...
Excellent work. I request u to make the complete series of RCC Design.
Thanks for making complete series of RCC Structures.
Sir you are a genius, your teaching method is amazing you are perfect professor. Thank you so so so so much sir.
what a beautiful explanation teacher. thank you very much
Bro your a blessing!!
Jabardast
Sir your knowledge and quality explaination is too much good .
That's why please take other Lactures on RCC design
Yes i will upload entire RCC lectures
it will be great
very nice explanation
AWESOME
Sir please take one lacture on stiffness matrix method for pin jointed plan truss having redundant more than two
Sir I want a help I have a 2800sq feet plot jisme mera uncle aur mera pitaji ka half half part hai mera uncle rrc build kar diya hai aur mujhe bol raha hai ki meh 2feet chor kar post do what can I do in that case
Thanks bro, even if you have not uploaded this video I would have requested you to make lectures on rcc
Hi sir..can u pls tell me the difference between bending and deflection?.....by the way u r a blessed teacher and the best one i ever know...thanku...pls reply to my doubt
We can say that if there is bending in a structure, there will be deflection, but we cannot say that if there is a deflection there definitely will be bending, because deflection is a general term and it can be caused by various types of stresses and forces, for example even axial forces can cause deflection. Now coming to understanding bending and deflection, a structure is said to bend when there is a radius of curvature formed for the structure, where as deflection is defined as translational or rotational displacement only at a particular point of interest (point where it is to be found).
thankyou
Error in 15:58 …. Codebooks
• IS 456:2000 Code of practice for Plain and reinforced concrete (fourth revision)
• IS 875(Part 1):1987 Code of practice for design loads (other than earthquake) for buildings and structures Part 1 Dead loads - Unit weights of building material and stored materials (second revision)
• IS 875(Part 2):1987 Code of practice for design loads (other than earthquake) for buildings and structures: Part 2 Imposed loads (second revision)
• IS 875(Part 3):1987 Code of practice for design loads (other than earthquake) for buildings and structures: Part 3 Wind loads (second revision)
• IS 875(Part 4):1987 Code of practice for design loads (other than earthquake) for buildings and structures Part 4 Snow loads (second revision)
• IS 875(Part 5):1987 Code of practice for design loads (other than earthquake) for buildings and structures Part 5 Special loads and load combinations (second revision)
• IS 1893(Part 1):2002 Criteria for earthquake resistant design of structures: Part 1 General Provisions and buildings (fifth revision)
Yes i have mentioned it as a comment and pinned that comment.
@@DCBAonline yes sir....just now i saw your comment ...and i just wanted to say Thank you.... your videos are very usefull.... Thanks sir once again🙂
@@DCBAonline
Hi sir I want udemy coupon and my doubt can I learn from beginning as I am in engineering. Can I learn from basic right?
Please reply and share me udemy coupon please
Sir can you make video on prestressed concrete design.
RCC design can sometimes fail practically, due to cracking
Steel structure may fail due to buckling in practical lives as Indian climate salt water environment can not withstand iron and form rust and low strength
Sir can u plzz suggest me good books of rcc for more information and detail
N Subramaniam, Dayaratnam, Bhavikatti
Thankyou ☺️☺️☺️
Pillai Menon is one of the best book of RCC design