How to Replace Thermostat Housing 2007-2017 Jeep Compass
HTML-код
- Опубликовано: 7 сен 2024
- Buy Now!
New Thermostat with Housing Assembly from 1AAuto.com 1aau.to/ib/1AEM...
The thermostat controls the flow of coolant in your vehicle’s engine. When a thermostat fails, it can lead to overheating, which will damage the engine. One sign of a faulty thermostat is a cool upper radiator hose when the engine is at full operating temperature. It’s important to replace the thermostat immediately if you suspect it is failing. This video shows you how to install a new TRQ thermostat and housing in your 2007-2017 Jeep Compass.
• Check here for more videos on the 2007-2017 Jeep Compass: • Jeep Compass 2007-2017...
This process should be similar on the following vehicles:
2007 Jeep Compass
2008 Jeep Compass
2009 Jeep Compass
2010 Jeep Compass
2011 Jeep Compass
2012 Jeep Compass
2013 Jeep Compass
2014 Jeep Compass
2015 Jeep Compass
2016 Jeep Compass
2017 Jeep Compass
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oyi/1AX...
• Pocket Screwdriver
• Pry Bar 1aau.to/ogI/1AX...
• 10mm Socket 1aau.to/oui/1AX...
• Coolant Funnel Set 1aau.to/os/1AXA...
• Trim Tool Set 1aau.to/ohW/1AX...
• Hose Clamp Pliers 1aau.to/o7/1AXA...
• Ratchet 1aau.to/oz5/1AX...
• Socket Driver
• Torque Wrench 1aau.to/opz/1AX...
• Drain Pan 1aau.to/oc3/1AX...
• Floor Jack 1aau.to/ohE/1AX...
• Jack Stands 1aau.to/og3/1AX...
• Pick 1aau.to/oe2/1AX...
• Razor Blade / Gasket Scraper 1aau.to/oaJ/1AX...
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Jeep Compass 2007-2017 1st Generation: • Jeep Compass 2007-2017...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
This video enabled me to replace my thermostat on my 2014 Compass, and fix the overheating problem. I’m a layperson with basic tools, but this video made it possible. Saved me a significant repair bill. Thank you!!!
Agreed , I bought the new kit and forgot to index the thermostat , so I watched the tutorial very closely it was immensely helpful , I'm grateful. But beware on the Avenger the heater hoses on 2008 models are a bigger diameter , but gates do conversion hoses to allow the updated housing to fit.2009 the changes happened .
This is the only channel that actually teaches you things the right way. I've seen hundreds of videos to change my thermostat and none of them showed you to check the pressure with the pressure tester.
Damn good video, no extra bullshit, just straight to the point
Thank you. You are a wonderful teacher and covered everything thoroughly.
Appreciate the videos, its a good reason why im not buying another jeep anymore, too complicated to do simple work. My car doesnt quite get up to temp, so I assumed my thermostat might be bad and stuck open, and thought about replacing. This however, is something to be done on a nice weekend. Or in a shop lol.
Glad I found this video. I have to do this to my patriot
thanks this video helped me fix my overheating issue
Makes sense 2 thermostats set in plastic when it fails the heat builds up and the heat range for that housing damages the integrity and crystalozrs and puts stress Cracks where the leak is but maybe doesn't leak constantly plastic cools faster than the metal
Obviously this is a compatible process with the patriot right?
Great video, the only thing i wouldn't have done was remove the ecu. I would have just unscrewed the top of the air filter housing and then flipped that and the ecu over to the left.
Is it worthy to only replace the thermostat? Not the full housing?
Replaced the housing, and now my temp gauge is at 3/4 any tips on how to go about this?
Why would you need to replace the entire housing, why not just the thermostat(s)?
Really helped a lot was able to do whole job through your video thanks again
In the Jeep compass 2.2 engine Crd the thermostat is in a different location
You say the new thermostat housing may only come with one thermostat but you had a second one? I'm confused
Great illustration. Thank you very much.
I keep seeing a small puddle of coolant building up on my transmission close to that housing. Replaced the housing twice and still keep getting that. Any suggestions. 2014 jeep patriot 2.0 92000 miles
Any luck finding that leak? I have a similar situation, mine is leaking up higher on the plastic intake behind some sort of cube to the left of the thermostat housing. Please let me know if you found where it’s leaking.
do you really need the 2 thermosthat? or can you used the same one at the top 210?? and torque specs please
Thank you!
Excelent,,Congratuleychion friend very good
Good job, if fan does not work could be fuse or relay in this case?
Petonges! I love it. There's Frenchman somewhere in that boy lol.
is there a reason why you can't just replace both t stats and re-use the housing?
This was fantastic! Thank you and great job!
Solo per avere una vaga idea, quanto può costare in media un intervento così in officina? Grazie a chi mi risponderà...
Hi I'm having issues lining up the bolts after putting in new houseing any tips I've tried over and over not stripped at all fit fine with houseing off its a brand new matching housing any tips please and thank you
Thanks
My brother noticed that the container did not have any coolant or was low. Will this cause the car computer to beep.
possibly simple minded question... is this a 1/4 turn petcock or does it unscrew completely? I worry with plastic parts that I will turn them too far and break something.
What are the torque specs?
hi, when tightening the bolts, what kind of force did you use in the key. Show me the numbers please.
thank you
Good video.thanks
That was a GREAT video !!! Thanks.
Wont this mess with the computers memory? I mean removing the two red connectors on the module.
So all the parts that were replaced were thermostat, housing, and O-ring?
Your can stop at 4min, no need to disassemble anything else as long as you have a flexible extension for your socket wrench, you can get the bolts off the housing without having to take anything else off.
Does it work for jeep Patriot 07
You didn't tighten the lower intake tube clamp
What do I do if only one fan comes on
What the torque spec
I bought a thermostat housing from autozone and my problem is that the back hoses are to big for the connection.whats a suggestion on what should I do to get this solve
Do you have to replace the whole housing when replacing the thermostat?
It is very clear not to disconnect the plugs from the CPU. First hand experience that's a $1900.00 follow mistake. You should not doing it this way for viewers.
A1 auto???
Thank you!