Can you also print shadows and not only the outlining? I think that I read that this model is able to differentiate tones and shadows and print them, so if you prefer to have them on the stencil, as for example doing realism, this can be useful
What tech is use inside the printer for print?! I bought hprt mt800q said thermal too but does not works on stencil paper..only print on a4 paper. No use for tattoo. It has cartridge ribbon in it. So.. What is in brother printer?! Do you need to change after a certain period of time?!
All i know it’s based on heat ! It heats up the part of the stencil only where the drawing is.. it has no cartridges.. you don’t need to change anything in it ! If you take good care of it it works for life
I recently got the brother pj 723 and have issues with printing the stencil paper. in the process of printing the paper gets stuck and the little printer sucks in the paper from both ends. any tips of how to fix it? unfortunately I cannot find anything useful on the web. have been trying various things like re-installing, updating, adjusting the paper. just SOMETIMES it seems to work perfectly.
i got the same problems. i got the pj 623 and its printed the stencil slow but without rolling the paper off. my new one pj723 prits so much faster than the older on. the new one had an akku. my old 623 rc cabel. could be this problem?
Looks good but the details on the face of the woman are basically invisible ( talking about those cheek lines ) why is that? Those lines seem dark enough to be read by the printer yet they don't appear on the stencil
I didn’t make the stencil dark enough in the app. And also you can edit it in the photo app of the ipad to put the brilliance at 100% and it should have no problem printing them😊
I bought and adjustable power supply. And that solved the jaming problem. Now I need to fix the roller because it was jamming before due to the power issue now there are streaks I would like to get rid of. Oh it print best for me at 12 volts
We bought such a printer and it doesn't work properly. The paper gets stacked there and it just doesn't go and the printer jawing it. What should we do?
if it gets stuuck lower your density .. and don`t try to print shadows or large patches of black. i recommend using the tattoo stencil app from the app store and filter the designs with the app first before printing them. i will make a follow up video about all the issues that i get asked in the comment section..it will be out in 2 days at the most.. thank you for you`re support
Usually it gets stuck when you put loose layers into the printer. Don't cut the yellow sheet off. Leave around a half inch at the end so it holds the other 2 layers together. That's what helped me.
I'm trying to be a self taught tattoo artist so this honestly goes a long way for me thank you so much and if you ever see this comment I'd like to pick your brain a little bit about some of the things you had to do before you become a tattoo artist. If you're willing ofc.
Hello thx for your video, i bought 763 moi last days but my stencil looks very lighter, some tinny lines disappear, fat lines too . Do you have the ‘ STENCIL MODE ´ enabled or disabled in the setting panel ? Thnx for your advice 🙏
Hello! The app in the video its called pencil sketch pro ..science then I’m using one more and it’s called tattoo stencil on the App Store..its a TS white logo with red background
I use procreate to make my design, i save it as a jpeg or png and after i use tattoo stencil app or pencil sketch pro te make it in to a printable stencil and after i use brother iPrint and scan to print it out ! Now I don’t know if my way its the best way to do it but its what works for me best and it saves me a lot of time! Hope this is useful
Hello, can u help me with my problem with printer, please? 🙏🏼 When i put paper in to the printer and start printing, after that the print did not catch on paper, do u know why? Thanks for your answers 🤙🏼
If you are trying to print unedited photos directly it will not work! You need to edit them in pencil sketch pro or tattoo stencil app or do a line drawing of it in procreate! If not, lower your density in the printer app! Go to settings/density
Watch the brother printer reviews with that pj guy , he uses his printer with a different power supply and not the brother one , he says that stops jammin
Salut! Killerink.co.uk ... da vine cu tot cu acumulator si cu softu pentru tattoo stencil direct instalat de ei.. e pregatita pentru tatuaje direct din cutie
@@roytumbelaka when you save a photo with the pencil sketch I think it’s going to ask you if you want to buy the pro version.. it costs 3 or 4£.. then when you click yes it takes you to the App Store.
"PERFECT" half the lines are missing, this is a thousand dollar printer, well mine was and it's a piece of shit, it literally says in the specs that it prints at 300dpi, but look, it even missed the small lines in this stencil, 300 dpi my ass, no where near 300dpi! the new Chinese thermal printers are smashing the brother version and at quarter the price
@@rustyneedles3743 at the time i did this video , it was the best you could buy.. but very much expensive.. if you use it whith therma tekk stencil paper, it will get all the details.. BUT YES YOU ARE RIGHT… Chinese printers are far better and cheaper now than the brother printer
@@ZaCrow I didn't mean any offense to you personally bro, just a tad pissed off at brother, I'm using the PJ-733 and I'm having major troubles with it printing small lines, yet the product specs say it should print at 300dpi, so it should easily print the small lines, so I'm currently dealing with brother, hopefully, they can tell me what settings to use, or else I'll report their product for false advertising, am very much thinking about buying one of the Chinese printers, I have to literally enlarge all the lines in my digital drawing in order for it to print correctly, just extra time wasted when I bought the printer to expedite the process, sigh
@@rustyneedles3743 I literally bought 2 days ago a cheap printer.. its called Therma Tekk MHT-p19 bluetooth printer. Its far superior to brother printer and only cost me 120£ .. I would advise you to try it out .. you will not be disappointed.. and no offence was taken. Have a nice day!🙂🫡
@@ZaCrow oh dude, seems like we are on the same page, you just beat me to the purchase, could I ask where you bought yours from, I'm keen to buy one immediately, I'm over "brothers" bullshit ... and thanks for the replies bro, appreciate it
Can you also print shadows and not only the outlining? I think that I read that this model is able to differentiate tones and shadows and print them, so if you prefer to have them on the stencil, as for example doing realism, this can be useful
It doesn’t do a good job with shadows. I wouldn’t recommend it for that.
What tech is use inside the printer for print?! I bought hprt mt800q said thermal too but does not works on stencil paper..only print on a4 paper. No use for tattoo. It has cartridge ribbon in it. So.. What is in brother printer?! Do you need to change after a certain period of time?!
All i know it’s based on heat ! It heats up the part of the stencil only where the drawing is.. it has no cartridges.. you don’t need to change anything in it ! If you take good care of it it works for life
Uitandu-ma la clip am realizat ca esti Roman,printre pozele din galerie era Mihai viteazul,Decebal😂😂✌️
da sunt roman:)
Dupa accent, acronim... 😊
I recently got the brother pj 723 and have issues with printing the stencil paper. in the process of printing the paper gets stuck and the little printer sucks in the paper from both ends. any tips of how to fix it? unfortunately I cannot find anything useful on the web. have been trying various things like re-installing, updating, adjusting the paper. just SOMETIMES it seems to work perfectly.
Ajust the density if it gets stuck set it to 6 or 7 and dont print before you put the paper in !
i got the same problems. i got the pj 623 and its printed the stencil slow but without rolling the paper off. my new one pj723 prits so much faster than the older on. the new one had an akku. my old 623 rc cabel. could be this problem?
Same
Looks good but the details on the face of the woman are basically invisible ( talking about those cheek lines ) why is that? Those lines seem dark enough to be read by the printer yet they don't appear on the stencil
I didn’t make the stencil dark enough in the app. And also you can edit it in the photo app of the ipad to put the brilliance at 100% and it should have no problem printing them😊
I bought and adjustable power supply. And that solved the jaming problem. Now I need to fix the roller because it was jamming before due to the power issue now there are streaks I would like to get rid of. Oh it print best for me at 12 volts
Watching this amazing video on my iPad Pro 12.9 just like yours, awesome job 🎉
I’m having trouble connecting to Bluetooth on my iPhone and iPad with a pj-763. It’s not showing up.
try to watch paul talbot`s videos about the printers ,,he knows all the information about them ..idk what to say sorry
i’m having the same issue! did you ever figure it out?
763 isn't compatible with iOS. It is only for PC, OS, and Android.
hello, I'm not able to print with my brother pj763mfi through ipad. can you help me?
if you have it connected to your iphone or other device you need to disconnect it from it so you can connect it to another..hope this is useful
We bought such a printer and it doesn't work properly. The paper gets stacked there and it just doesn't go and the printer jawing it. What should we do?
if it gets stuuck lower your density .. and don`t try to print shadows or large patches of black.
i recommend using the tattoo stencil app from the app store and filter the designs with the app first before printing them. i will make a follow up video about all the issues that i get asked in the comment section..it will be out in 2 days at the most.. thank you for you`re support
Usually it gets stuck when you put loose layers into the printer. Don't cut the yellow sheet off. Leave around a half inch at the end so it holds the other 2 layers together. That's what helped me.
Hi! Assuming it is fully charged and that you haven't printed yet, how long does the printer stay on for when not connected to wall power?
I don’t have a battery on mine because there sold separately and they are like 100£ ! I don’t really need one 🙂
So far it prints out light or chews up the therofax paper. Even with me pulling on it lightly for tension.
Great video - are you using the Brother power supply, or a lower voltage one? Thanks!
Thank you! Im using the brother supply!
@@ZaCrow Awesome thank you! I just ordered one, stoked to stop doing hand transfer stencils!
@@eric_bones can you send me a link of where you ordered yours
@@freshface_2106 got mine used on eBay
The lower voltage 12v works better for tattoo stencils
Is it copied only by Usb communication?
Is it not possible to make a copy of the print method of printing?
Hello … what’s it the app ???
thanks
pencil sketch pro...and you can also get Tattoo stencil app on IOS :)
I'm trying to be a self taught tattoo artist so this honestly goes a long way for me thank you so much and if you ever see this comment I'd like to pick your brain a little bit about some of the things you had to do before you become a tattoo artist. If you're willing ofc.
Get an apprenticeship.
Hello thx for your video, i bought 763 moi last days but my stencil looks very lighter, some tinny lines disappear, fat lines too . Do you have the ‘ STENCIL MODE ´ enabled or disabled in the setting panel ? Thnx for your advice 🙏
Make sure your lines are full black in the drawing and than go to settings in the iprint and scan app and put you density all the way up to 10
hello, what is the name of this white tablet on which you prepare patterns? thank you in advance for your answer ?
It’s an ipad pro
Mine keeps jamming any tips ?
Hi, there. What is the name of the stencil app? Didn't find it on app store.
Hello! The app in the video its called pencil sketch pro ..science then I’m using one more and it’s called tattoo stencil on the App Store..its a TS white logo with red background
i have one with a battery and it lasts pretty damn long, it usually turns off on its own after no use
Can you also connect it to the procreate app? That’s what I primarily work with. Just curious
I use procreate to make my design, i save it as a jpeg or png and after i use tattoo stencil app or pencil sketch pro te make it in to a printable stencil and after i use brother iPrint and scan to print it out ! Now I don’t know if my way its the best way to do it but its what works for me best and it saves me a lot of time! Hope this is useful
Can u use phone?
Only iPhone
Hi there. So what is the model that is compatible with ios bluetooth?
PJ 763 MFI
One of the most affordable wireless printers
How did you connect it to your ipad?
It’s connecting via bluetooth . You just go to settings/bluetooth and it should be there!
Hello the name of the app pls i couldnt hear it when u name it?!
Pencil sketch pro is o e app and now I’m also using tattoo stencil app
What kind of iPad ya use
Ipad pro
iPad app name ?. Mention app name please
Pencil sketch pro
@@ZaCrow What would be the Windows version of that software?
Hi bro maybi know the apps you used
Hello, can u help me with my problem with printer, please? 🙏🏼 When i put paper in to the printer and start printing, after that the print did not catch on paper, do u know why? Thanks for your answers 🤙🏼
If you are trying to print unedited photos directly it will not work! You need to edit them in pencil sketch pro or tattoo stencil app or do a line drawing of it in procreate! If not, lower your density in the printer app! Go to settings/density
Can you only get the pencil app on iPad?
I have it on my iPhone as well! I have no idea if it works on android but I don’t see why not!
@@ZaCrow i cant find it in the app store on my iphone 😢
Which brother app are you using to print
Brother iPrint&Scan
@@ZaCrow right on bro
Can you put the link for the APP please?
You can find it on amazon
Price?
Thanks for sharing 👌🏾
New here".. how much the mchine printer??
I bought it from killerink.co.uk for 560£ I think it was
@@ZaCrow Can you convert it from dollars?? Thank you!!
795 US dollars
@@ZaCrow My god it is very expensive!! Anyway thank you so much!! I promise i will always support you!!! Im from philippines!!
Thank you for all your support 🙏🙏🙏
hey, which stencil paper do you use ?
Spirit
Spirit is sold out everywhere. Any other good stencil paper
@@gregpanasiuk5210 sorry I’ve only used spirit idk!!! I buy mine from killerink.co.uk or barberdts
Thank you brother. Yes spirit is sold out everywhere. You can preorder november batch on amazon right now. Sold out everywhere else
I thought there might be like a second choice
Salut, ce gen de tableta folosești?
salut! ipad pro
Multumesc!
Cu placere!
Why does my printer keep jamming? I have done everything exactly the same, all the way from same paper and printer and settings
Watch the brother printer reviews with that pj guy , he uses his printer with a different power supply and not the brother one , he says that stops jammin
buna! poti sa mi zici si mie de unde ai luat o?
si daca iti trebuie vreun acumulator ceva sau vine cu el in pachet
Salut! Killerink.co.uk ... da vine cu tot cu acumulator si cu softu pentru tattoo stencil direct instalat de ei.. e pregatita pentru tatuaje direct din cutie
ok, deci nu trebuie sa ti iei nimic in plus? intreb ca pe unele site-uri spune ca nu vine cu acumulator.
@@denisatngh6796 nu trebuie nimic. e totul in cutie
Привет как называется программа переводить в графику
the other app don,t work too!!
thank u!
You’re welcome!
Si se facu’ lumina 😅thx
Ce lumina?🤨
@@ZaCrow acum stiu mai bine cum s-o folosesc ....😊era un mod de-a zice
@@ellya2oo7 😁
Hi im having problem like i dont know which paper settings i should use for ipad when im using iprint. Help please
My settings are set for A4, i have the density all the way up to 10 .. and feed mode-no feed (roll paper) I don’t think the last one matters
@@ZaCrow its just like prints a very slight look even the density is on 10... but on PC it prints very good
@@ZaCrow And no printing voice idk why thanks for answers still bro
configuration?
Which app you use to lighten that picture
Pencil sketch pro
the app don,t work!
Try tattoo stencil app ! Its a TS white logo on red background! Its better
@@ZaCrow
thanx i,m gonna try tomorrow!
What is the name of the sketch app?
To make a stencil?
It’s called pencil sketch pro
@mariusCrow..there is no Pro version for this on the app store,only PencilSketch and its with a really big watermark across the drawing🥺🥺
@@roytumbelaka when you save a photo with the pencil sketch I think it’s going to ask you if you want to buy the pro version.. it costs 3 or 4£.. then when you click yes it takes you to the App Store.
@@ZaCrow ah..cool thanks mate👍🏽
@@ZaCrow i’m going to but the MFI version and if needed i will contact you if you dont mind 🙏🏽
I need to buy this.
hi can I use any transfer paper?
It has to be thermal!! It doesn’t matter the brand
Is there any way I can print the finished picture myself? I'm waiting for your answer I beg you.
발음표기
확대보기
재번역
Maybe you're not old enough to know that the stencil paper you're using used to be sold as carbon paper for carbon copies from typewriters!
Can we stop with the gloves already 🤦🏼♂️
lol..don`t watch if you don`t like or press the dislike button . bye
"PERFECT" half the lines are missing, this is a thousand dollar printer, well mine was and it's a piece of shit, it literally says in the specs that it prints at 300dpi, but look, it even missed the small lines in this stencil, 300 dpi my ass, no where near 300dpi! the new Chinese thermal printers are smashing the brother version and at quarter the price
@@rustyneedles3743 at the time i did this video , it was the best you could buy.. but very much expensive.. if you use it whith therma tekk stencil paper, it will get all the details.. BUT YES YOU ARE RIGHT… Chinese printers are far better and cheaper now than the brother printer
@@ZaCrow I didn't mean any offense to you personally bro, just a tad pissed off at brother, I'm using the PJ-733 and I'm having major troubles with it printing small lines, yet the product specs say it should print at 300dpi, so it should easily print the small lines, so I'm currently dealing with brother, hopefully, they can tell me what settings to use, or else I'll report their product for false advertising, am very much thinking about buying one of the Chinese printers,
I have to literally enlarge all the lines in my digital drawing in order for it to print correctly, just extra time wasted when I bought the printer to expedite the process, sigh
@@ZaCrow oh and i just realized you uploaded this 3 years ago, my bad bro
@@rustyneedles3743 I literally bought 2 days ago a cheap printer.. its called Therma Tekk MHT-p19 bluetooth printer. Its far superior to brother printer and only cost me 120£ .. I would advise you to try it out .. you will not be disappointed.. and no offence was taken. Have a nice day!🙂🫡
@@ZaCrow oh dude, seems like we are on the same page, you just beat me to the purchase, could I ask where you bought yours from, I'm keen to buy one immediately, I'm over "brothers" bullshit ... and thanks for the replies bro, appreciate it
can you give me you ig
instagram.com/crowtattoos/