Husqvarna 359 intake boot repair

Поделиться
HTML-код
  • Опубликовано: 10 ноя 2024

Комментарии • 53

  • @HallnoutMhall
    @HallnoutMhall 4 года назад +5

    Hopper in the house! When Jereme said he was worried about all of us, trust me he truly was (is). This man has a heart of gold! Welcome all new subs and everyone stay safe.

  • @ryanmason9141
    @ryanmason9141 Год назад +1

    I like the tidbit about filing down that piece where the carb bolts up

  • @outragousbob4367
    @outragousbob4367 4 года назад +3

    Don't know you from Adam Mr. Hopper but I know a genuine good human when I see one. You sir are one of the good guys!

    • @bellhoppersaws
      @bellhoppersaws  4 года назад +1

      Thank you buddy thats all i know how to be. It means alot to me to be up front and honest

  • @butchhill2001
    @butchhill2001 4 года назад +7

    we all no your a Goodman Bellhopper keep it up

  • @joshspoto6226
    @joshspoto6226 4 года назад +4

    Glad your back up and running brother. Thanks for the video and have an awesome day! ✊🧡

  • @brettblack7049
    @brettblack7049 4 года назад +4

    Sorry you had the issues with your channel, I did as well, glad I got mine back.
    As far as the plastic clamp, what I've seen with the ones I've bought/sold, the main issue that causes them to loosen up is running them with a dull chain. A dull chain causes them to run at max rpm in the cut and they overheat and then the plastic clamp loosens.

  • @bobfitch607
    @bobfitch607 4 года назад +2

    Glad you got u tube straightend out.sorry I missed the live chat I was in camp boiling sap.hope to make the next one. No service up there. Be safe to all friends 🙏

  • @woodyjade9097
    @woodyjade9097 4 года назад +2

    This was so helpful as I have to replace an intake boot in a 625 Jonsred. Thank you

  • @stevetheriault4164
    @stevetheriault4164 4 года назад +7

    Coming up on 3,000 SUBS buddy good for you i had a 353 did the same thing good video buddy ,take care buddy be safe see you on saturday

  • @mikemaxwell1746
    @mikemaxwell1746 4 года назад +3

    Glad your back on here.

  • @thewoodchucker-doug4303
    @thewoodchucker-doug4303 4 года назад +3

    Hey Jereme! Glad to see you are back up and running, knew you followed all the rules ..... but that’s another story we don’t need to know. Keep on cranking out the awesome content we have been accustomed to...... better days ahead buddy! Maybe the tube had a virus...... 😂

  • @bobpurs
    @bobpurs 4 года назад +3

    Whatever happened,glad your back 👍✊

  • @jameskeeler6417
    @jameskeeler6417 4 года назад +3

    Good to have you back buddy!

  • @terryw.milburn8565
    @terryw.milburn8565 4 года назад +3

    Hay, Hopper, Sure Glad Things got worked out for Ya. Great How-2 Brother Stay Safe. ATB T God Bless

  • @deaniverson4671
    @deaniverson4671 4 года назад +2

    We all support you, keep doing what you always have done, great honest respectful content!!

  • @Thetreefella
    @Thetreefella 4 года назад +4

    You have awesome content. You most definitely take care of your channel... Love it Jereme!!!! Take care buddy.. 👊👍👊

  • @drewdouglas4883
    @drewdouglas4883 4 года назад +2

    Sorry I missed the live feed but I didn’t get home till 10 o’clock
    I was fishing in my happy place on the creek 👍

  • @bombardier3qtrlbpsi
    @bombardier3qtrlbpsi 2 года назад

    Mine has a steel clamp and I can still push the clamp around the boot. So that shows how tight it is. Unreal.
    And that walbro carb with the brass plug accelerator pump.

  • @vintagesawyer6246
    @vintagesawyer6246 4 года назад +2

    Helloooo evrybudy! Lookin forward to the crank pin vid. 👍welcome back

  • @TheJonsberg
    @TheJonsberg 4 года назад +3

    Gooood to see you back brother 👍😀

  • @austinthornley1272
    @austinthornley1272 2 года назад

    Awesome video man! Exactly what I was doing to my saw

  • @jeffreyrubish347
    @jeffreyrubish347 4 года назад +3

    Fixing saws and minding our p's and q's 🙂

  • @gm19651
    @gm19651 3 года назад +1

    Hi thanks for info. My clamp plastic clamp is broken. Any way do you have to take the cylinder off. Or can it be done in the machine cheers

  • @davidbroad4834
    @davidbroad4834 4 года назад +2

    Good at explaining!

  • @simpleman4224
    @simpleman4224 4 года назад +2

    Stay true to your beliefs, right always wins!

  • @mistermacgray
    @mistermacgray 4 года назад +5

    Guilt until proven innocent.

  • @SHNTRU
    @SHNTRU 4 года назад +1

    Hey bro greeting from New zealand, this lockdown BS means I cant go get a clamp do you think I could use a ziptie? Seeing as how the clip is plastic anyway

  • @gforcesg
    @gforcesg 4 года назад +2

    great video thanks !!!

  • @frankhopper6269
    @frankhopper6269 4 года назад +2

    it's great too see you back and running hot like your rebuild chainsaws Bellhopper lol. Regards From Frank over in Australia

  • @MrItzzzAndrew
    @MrItzzzAndrew 3 года назад

    I just picked up a 359 ran good for about 15mins then bogged out wouldn't start so I put a new carb on it ran for about 2 tanks now I can't get it started again would the boot be something I should look at?

  • @jeffross9275
    @jeffross9275 4 года назад +2

    After you put the sealer on you are supposed to pick your nose to keep out the coron 19

  • @jeremywever6947
    @jeremywever6947 4 года назад +2

    Is there any thing this man can't fix? 👍

  • @FreedomWorx4Me
    @FreedomWorx4Me 4 года назад +3

    What sealant do you use? Thanks

  • @bobbynash282
    @bobbynash282 4 года назад +7

    Thats a load of hog wash. With some of the videos cursing saying everything possible. An these videos are still up. I try an make sure l dont have em. No one would ever believe anything like that. They really got their wires crossed. Maybe its cause you said youd pray for someone. After all the good things seem to offend someone. Thats really sad.

  • @jeffreyrubish347
    @jeffreyrubish347 4 года назад +1

    Hello all!

  • @lowellmiller6663
    @lowellmiller6663 Год назад

    "A real pain the ......"? @6.35 I didn't catch that one 😊

  • @iceman3071
    @iceman3071 4 года назад +4

    I love you vlogs but I never can see what you're doing. Move the camera!!! Please

  • @michaelsmith1677
    @michaelsmith1677 4 года назад +2

    Get er fixed ok buddy

  • @joew9392
    @joew9392 2 года назад

    A Stihl 029-039 clamp works fine..

  • @bombardier3qtrlbpsi
    @bombardier3qtrlbpsi 2 года назад

    There's not even 100 hrs on this 359 saw. I had a Husqvarna 41. Never ever gave a a minutes trouble. Cords and cords of wood.

  • @Neighborhoodgo2guy
    @Neighborhoodgo2guy 4 года назад +3

    Too bad Stihl and Husqvarna couldn't make these easier to swap out.

  • @ifitflipsitships5102
    @ifitflipsitships5102 4 года назад +1

    you have to monetize your channel or you will keep being taken off.

    • @brettblack7049
      @brettblack7049 4 года назад +2

      Has nothing to do with it, they have the right to remove any videos and any channel and they have removed many of them recently both monetized and not.

    • @bellhoppersaws
      @bellhoppersaws  4 года назад +2

      Hey buddy it is monitized lol i think it was some new thing they use to check over the vid settings but idk

    • @brettblack7049
      @brettblack7049 4 года назад +2

      @@bellhoppersaws yep, there have been a good number of guys in the saw community having problems with our accounts being terminated, but its not just us, we mainly hear about it from others in our circle, Google it and you see its everyone having the same issues and its not totally new. I do believe that there is something in the new algorithms that doesn't like the chainsaws running, I think it detects the noise as screams, that's part of my theory with regard to the recent issues as that when most my buddies had problems, right after loading cookie cutting videos. But as I said above they are terminating many accounts as its just where they are moving as a business, and that's what it is, a business.