P0497 EVAP PURGE SOLENOID REPAIR AND VERIFICATION : 2005 HONDA ACCORD V6 J SERIES

Поделиться
HTML-код
  • Опубликовано: 23 дек 2024

Комментарии • 13

  • @Donjuliolll
    @Donjuliolll Год назад +2

    So I had the same code come on. I replaced the part, erased the code. But eventually it came back on. I also replaced the gas cap. Any suggestions ? Thanks

    • @SkillCollectors
      @SkillCollectors  Год назад +2

      Same car, Accord v6? Are you able to run the function test with a scan tool and are you able to perform a smoke testing. May have to go that route to continue narrowing down the problem. Usually I suggest doing those tests first before replacing the parts.

    • @Guachale
      @Guachale 5 месяцев назад

      Did you find what the problem was?

    • @Donjuliolll
      @Donjuliolll 5 месяцев назад +3

      @@Guachale yea replaced the purge solenoid with a oem Honda one, problem solved. I also replaced the gas cap with factory one. I’d check local junkyard for the solenoid and replace it. Make sure it’s a factory oem one.

    • @teylorherrera2534
      @teylorherrera2534 3 месяца назад

      @@Donjuliolllhow do I know is oem ?

    • @Donjuliolll
      @Donjuliolll 3 месяца назад

      @@teylorherrera2534 OEM should have the Denso stamped on the solenoid.

  • @ua7pyro591
    @ua7pyro591 Год назад +1

    Easy and quick repair!

  • @Tableshaft
    @Tableshaft 4 месяца назад

    Good video bro, how urgent is the replacement of the part? In other words will it cause problems if I drive the car for a few days?

  • @brandonlopes7642
    @brandonlopes7642 Месяц назад

    Whay about for a 4cyl???

  • @zenithauto5296
    @zenithauto5296 Год назад +1

    Good info!