Thank you Victor!! Dimitri you rock as always my guy! Me and my brother used to put I❤ Back Street Boys bumper stickers on the back of our buddies cars and trucks. Boyz to Men, all the little boy bands of the time. We had bumper sticker wars. Ours buddies would get so pissed when they'd find out and try to retaliate so we'd retaliate with shoe polish the whole car I love Back Street Boys or Honk or I Brake for boys. It was so funny and good times.😅
Hey dude thanks for checking out this video, the truck seems to be in good shape but it appears the engine is quite low compression, it will need to be re-pinched or replaced soon to be drivable.
I would try to repinch it using a cookingplate to heat up the liner then put a steel hoseclamp on the topside of the liner make it tight but not to tight and let it cool down and check the pinch. when the pinch is not tight enough repeat the proces until it does. i did it once and it worked great.
I wouldn't be surprised if the engine was left at tdc and allowed to cool. Always turn the flywheel so the piston is at BDC when it shuts down to avoid losing pinch
Hey man thanks for checking out this video. I think you are correct about the piston being left in the wrong position, this motor seems to be very new with very low run time it is unlikely that it has such low compression from just a normal running conditions, the prior owner for sure neglected to put the first thing in the correct position.
hey dude! yes man this brand is USA based at the time. Very rare to see them outside of the USA. They made some great models which were not clones and actually had some good flair to them.
Hey dude good news I got the linkage said in the mail today, I really appreciate it thank you once again. The Traxxas motor is like most big block engines use a rubber O-ring on the back plate, it almost never gets damaged during repairs.
hey bro! let me give you an update so far, I've determined the clutch spring is terrible and have replaced it. I will do more testing soon. thanks for checking out this video my dude.
Hey everyone who owns an rtx 27 warhead, i need your help! I need to know where I can buy a front dogbone driveshaft. I LOOKED EVERYWHERE. Is there one that fits????. This is only missing part I need to make it run!!!
The NitroGang is here! Special thanks to Victor who sent me this nitro truck.
Still have my duratrax warhead. My first rc bought in early 2000s
Awesome truck!!! kudos to Vic for donating it to the channel 👏
true that our king of nitro is a hard working guy!, God bless
thank you my dude!! Happy TO HAVE YOU HERE! Happy 4th to you and your fam!
Victor knocked it out the park. Amazing looking truck
I designed that damn thing. Brings back crazy memories whenever I see one!
Thank you Victor!! Dimitri you rock as always my guy! Me and my brother used to put I❤ Back Street Boys bumper stickers on the back of our buddies cars and trucks. Boyz to Men, all the little boy bands of the time. We had bumper sticker wars. Ours buddies would get so pissed when they'd find out and try to retaliate so we'd retaliate with shoe polish the whole car I love Back Street Boys or Honk or I Brake for boys. It was so funny and good times.😅
Awesome video awesome truck and Victor you're a great guy for doing this.
thank you my nitrogang brother!! I'll see what my options are on the motor and the low compression, then this truck will be great again!..
@@hybrid32494 first thing that went through my mind was why not a Dynamite .28 as well
@@hybrid32494 awesome truck, deserves good servos and radio.
It is very clean like as NEW!
Hey dude thanks for checking out this video, the truck seems to be in good shape but it appears the engine is quite low compression, it will need to be re-pinched or replaced soon to be drivable.
Awesome gift! Great viewer!
that was nice of victor..great video
I would try to repinch it using a cookingplate to heat up the liner then put a steel hoseclamp on the topside of the liner make it tight but not to tight and let it cool down and check the pinch.
when the pinch is not tight enough repeat the proces until it does.
i did it once and it worked great.
I wouldn't be surprised if the engine was left at tdc and allowed to cool. Always turn the flywheel so the piston is at BDC when it shuts down to avoid losing pinch
Hey man thanks for checking out this video. I think you are correct about the piston being left in the wrong position, this motor seems to be very new with very low run time it is unlikely that it has such low compression from just a normal running conditions, the prior owner for sure neglected to put the first thing in the correct position.
@@hybrid32494 I completely agree, that's barely seen break in run time
well said Victor! God bless
yup! Victor is the man!!
Sickening 👍
thank you man!
Engine is a toki .27...I'm running one on my kyosho gt1..👍🏾
hey bro! that you for the comment, I will look it up right now! Really appreciate the extra info!!
cool vintage nitro
Great video!
thank you bro!! When you got great viewers, supporters and NItroGang members you never run out of content.
Looks great bro never seen them in uk bro
hey dude! yes man this brand is USA based at the time. Very rare to see them outside of the USA. They made some great models which were not clones and actually had some good flair to them.
I gotta get my hpi savage with a dynamite.28 big red big block running. I had it firing last fall but couldn’t keep it running
Sicking
thank you dude!!
What type of a seal does Traxxas use on the back of their motors
Hey dude good news I got the linkage said in the mail today, I really appreciate it thank you once again. The Traxxas motor is like most big block engines use a rubber O-ring on the back plate, it almost never gets damaged during repairs.
That's a cool truck, is that the same durotraxx tires...?
hey my dude!! thanks for checking out this video. Those are the stock tires the RTX-27 came with from the factory!
@@hybrid32494 the truck is a Durotraxx RTX-27 is it the same company that makes Durotraxx tires?
Replace the motor! Nice truck man.
hey bro! let me give you an update so far, I've determined the clutch spring is terrible and have replaced it. I will do more testing soon. thanks for checking out this video my dude.
@@hybrid32494 Nice! But the fact you can spin the flywheel by hand so easily can’t be good :)
@@aut0bahn yes, bro, that is what I'm thinking too. Usually you cannot spin the flywheel over when a motor has good compression.. you're 100% right..
Hey everyone who owns an rtx 27 warhead, i need your help! I need to know where I can buy a front dogbone driveshaft. I LOOKED EVERYWHERE. Is there one that fits????. This is only missing part I need to make it run!!!
This looks a lot like an hpi savage
❤😂🎉😢😮😅😊. ไฟไฟไฟไฟไฟไฟแอดพ์.