Loved this video! That was a ton of work to record and edit I can imagine. Super proud of you making that Kyosho Great Again! Question is was there anything weird about this Kyosho that almost Pissed you Off, cause Kyosho seems to do that to me frequently, lol! ahah. JK.
@@TheMrchips25 yeah it does that’s true, almost impossible to set a perfect mesh on a two speed, my trick was to just buy a shitload of spare gears 😂 they wear rather slowly though so kinda good in that regard.
I just don't get it, why do you only have this many subscriber's? You have a new subscriber, I am also going into this type of RC cars, bought my first nitro Thunder Tiger Subaru (used for only €60,-) and I hope when it comes tomorrow it will start fine after a clean up, have a nice day mate aan keep it up going😉 Edit: I saw that this is your first vid😂😂🤦🤦
Thank you! I have a thunder tiger ts4n also a subaru coming in the mail for restoration, so stick around for that! Stoked to have you on board with the Torque Nitro club. Welcome!
@@freddieparrydrums hell yeah man! What a great car, I have one of those in a video of mine 😎 They are unbeatable! Thunder tiger have great quality Rc cars, that’s for sure. Have fun man, if you maintain it, it will last ages. If you have any questions, please ask my friend.
@@freddieparrydrums Most welcome dude. Yeah the 2 speeds are super enjoyable, personally I found it interesting adjusting the 2 speed shift point to your liking. 100% if you look after it, it will look after you
Hello, I picked up my V one S from my parents, which is over 15 years old. I would like to restore it but I have no knowledge. What do you recommend ? It was my father-in-law who took care of the mechanics and I drove.
Hey there mate, I guess the first step would be cleaning the chassis to be able to properly check all screws, plastics & belts are in good shape. To clean use degreaser and a brush to agitate everything. Dry with compressed air. After cleaning, I’d oil all bearings. From there, you can add some oil to the cylinder (remove the glow plug, replace with OS#8 plug if required). After removing the glow plug, use a hairdryer to warm up the engine for a while, then attempt to use the recoil hand starter to turn over the engine. For the carburettor, use some fuel line & a syringe to push a small amount of methylated spirits into the carb. This will help clear it. Ideally, I would recommend a full engine tear down and deep clean, but I am aware you are new to this. That’s ok. After that you’ll need fuel, a charged igniter and a check of all electronics to ensure they’re working properly. Start it on a block of wood and let it warm up, then you can begin tuning. That should get you going for now man, you can do it 👌🏽🙌🏽
I didn’t do a full rebuild by any means on the shocks & diffs, just re oiled the shocks and added fresh grease to the diffs. Are you working on a v one s man?
I was the kid that sold u this that’s is amazing what you’ve done with it
Thank you very much mate, I'm really glad you watched this! you & your dad are great people. Stay tuned mate more videos are coming
@@torquerc4859 I love these kids that sell RCs cheap to us so we can clean them and make a video and double our money on eBay hehehe
@@torquerc4859good video
Bloody brilliant!!
Legend!
Loved this video! That was a ton of work to record and edit I can imagine. Super proud of you making that Kyosho Great Again! Question is was there anything weird about this Kyosho that almost Pissed you Off, cause Kyosho seems to do that to me frequently, lol! ahah. JK.
Thanks man, you're an OG! I'd say the servo setup for steering was not my favourite to deal with ahaha
Incredible video mate!! Very well done 👏
Thank you mate, appreciate it heaps!
I love rebuilding these older RCs! More of an electric guy myself, but id definitely be intrested in building a nitro in the future. Great work!
amazing video, that thing will rip!
cant wait to see some 2 speed baby's!!
Excellent! Video quality was great and the storyline content was flawless! Looking forward to future videos!
Thank you very much Kevin, I really appreciate the kind words.
Very nice. I'm sure it's very rewarding to see it rip well.
Kyosho V One S. GS15R Engine.
I still got mine running😁
Man what a restoration you've done!
Thanks so much dude. They are awesome cars hey, I run two speed now with sway bars etc, really makes the difference 👌🏽
Agree Man. That second speed is a game changer. Though it does slowly damage the second gear fast even setting it to engage at low speed.
@@TheMrchips25 yeah it does that’s true, almost impossible to set a perfect mesh on a two speed, my trick was to just buy a shitload of spare gears 😂 they wear rather slowly though so kinda good in that regard.
A+ video!💪 Very enjoyable. I love restoring old nitro vehicles as well. Keep the great content coming👍
Thank you very much mate it is a rewarding process!
Beautiful restoration man! Can't wait to see more 💯
Thank you - too kind mate and definitely more coming!
And the quality is amazing
Wow what a video mate. Earned my sub. Keep it shiny side up.🦊
Thank you Luke, you have a lot of brilliant restorations so I really appreciate the kind words coming from the man himself!!
This is such an awesome RC project
Cheers Freddie! Video of it ripping will be out soon
Nice job looks like a Ford GT body was curious about the drive belts were they frayed or stretched ! Top job !👍🏁
I just don't get it, why do you only have this many subscriber's? You have a new subscriber, I am also going into this type of RC cars, bought my first nitro Thunder Tiger Subaru (used for only €60,-) and I hope when it comes tomorrow it will start fine after a clean up, have a nice day mate aan keep it up going😉
Edit: I saw that this is your first vid😂😂🤦🤦
Thank you! I have a thunder tiger ts4n also a subaru coming in the mail for restoration, so stick around for that! Stoked to have you on board with the Torque Nitro club. Welcome!
@@torquerc4859 Awesome! I’ve just bought my first nitro, a TS4N!
@@freddieparrydrums hell yeah man! What a great car, I have one of those in a video of mine 😎
They are unbeatable! Thunder tiger have great quality Rc cars, that’s for sure. Have fun man, if you maintain it, it will last ages.
If you have any questions, please ask my friend.
@@torquerc4859 Thank you man, I appreciate that! Really excited to use it, 2 speed as well! I'll make sure to look after it 👍
@@freddieparrydrums Most welcome dude. Yeah the 2 speeds are super enjoyable, personally I found it interesting adjusting the 2 speed shift point to your liking. 100% if you look after it, it will look after you
Camera quality is amazing
Feels like I'm sitting right next to you
Love the work keep it up
You're the GOAT
hey =)
YES i watched this AND now glad that you made a driving video i watch that now =))
what Car is this body?
greetings
LIT BRUV
It was perfect ♥️
Thank you so much mate. Much appreciated.
Very strong vid - loved the photography and general production. Is it a '1 speed is all you need'?
Thank you Lawrence, haha I love that, in this scenario one speed for the win :')
Sweet
Nice
Can you recommend a body sheep for superten it’s so difficult to find the fit one
What’s the difference between the gs engine in this car and the gx engine in the Pureten alpha ?
Hello, I picked up my V one S from my parents, which is over 15 years old. I would like to restore it but I have no knowledge. What do you recommend ? It was my father-in-law who took care of the mechanics and I drove.
Hey there mate,
I guess the first step would be cleaning the chassis to be able to properly check all screws, plastics & belts are in good shape.
To clean use degreaser and a brush to agitate everything. Dry with compressed air.
After cleaning, I’d oil all bearings.
From there, you can add some oil to the cylinder (remove the glow plug, replace with OS#8 plug if required).
After removing the glow plug, use a hairdryer to warm up the engine for a while, then attempt to use the recoil hand starter to turn over the engine.
For the carburettor, use some fuel line & a syringe to push a small amount of methylated spirits into the carb. This will help clear it.
Ideally, I would recommend a full engine tear down and deep clean, but I am aware you are new to this. That’s ok.
After that you’ll need fuel, a charged igniter and a check of all electronics to ensure they’re working properly.
Start it on a block of wood and let it warm up, then you can begin tuning.
That should get you going for now man, you can do it 👌🏽🙌🏽
@@torquerc4859 Thanks bro !
Did you rebuild the shocks and difs
I didn’t do a full rebuild by any means on the shocks & diffs, just re oiled the shocks and added fresh grease to the diffs. Are you working on a v one s man?
I race the v one r4s and i hav o.s. r2104 engine
@@Paskaavuosaaresta very nice, what a machine. I bet it isn’t slow!
ihave this kind of kyoso how much this now ?
They sell for around 3-400 AUD, depends on the condition though
Hope you changed the 20year old rusty bearings inside the engine..
I have it
The same model? Awesome
Sweet