Will do! I'm knocking out a couple other things first, but I'll get back to making tutorials like these since there seems to be so much demand for them. Thanks for your feedback!
He is the best but unfortunately they don't have time to make it often. I believe he is the same as Tutor4u who is my favorite of all time in Utube. Whatever he has you will have the same as him. Check it out Tutor4u.
@@leftbraincgart Yes. I had to constantly pause. Some of us have a hard time with key commands, they are very difficult to remember. You just rattle them off as if everyone already has them memorized and for some odd reason actually think key commands are an easier way to do things. Some of us are not like that, we have a tough time with key commands, they do not make intuitive sense to people like me. Not to mention carpal problems (caused by using key commands) make it difficult to hit keys on the keyboard accurately. On top of all that, Blender does not o much in the application to give good hints as to what the key commands are, so If I miss something, I have to back up the video and slow own, because I can not find the corresponding operation in the GUI, because all you did was rattle off a key command with no mention of how to do it without a key command. Why is is ALWAYS about the friggin key commands!!!! You Blender people just LOOOOOOOVVVVEEEE your key commands. I HATE blender's key commands! Other than that, it would be an awesome program, but because of the key commands, I have never been able to get over the learning hump for Blender. :(
There's two major culprits I would check if you're running into shading issues. The first is for doubled up vertices. At 24:04, I go over how in edit mode, you can select all the vertices and merge by distance to get rid of any overlapping duplicated vertices. The second thing to check for are your normal orientations, which I go over at 32:47. In edit mode, you can try selecting your wardrobe and recalculate all the normals to face outside.
This is the first tutorial aI followed after completing the Blender Guru’s Donut tutorial. I am glad to say that this tutorial gave me extreme familiarity with Blender, which I needed as a beginner. Based on the things I learned here I was able to make blender gurus photorealistic chair almost perfectly and I’ve yet to face a problem I couldn’t solve based on the things I learned here. This should be everyone’s introductory video to Blender!
@@MsFaenya Well, now go do the Blender guru’s chair. You’ll get better very quickly, I got a good gig shortly after completing the chair. I’m happy I helped!
BTW, I stumbled a lot when applying the bevel modifier, they don't always work well. After searching for solutions, I realise that this could be resolved by simply applying the scale for the objects (ctrl+A). I don't know why you won't have the same problem but I think it's worth sharing.
In case anyone is struggling to find out how he was able to render the image at the end without clicking anywhere, well he just used F12. The rendering windows will pop up.
I have this issue, after rendering the project it doesn't look the same. Everything is kind of dissolved i guess, and something bad is happening with a floor. When I delete denosing it's really noisy so that's also bad. Also I don't seem to see integrator settings and render, viewport. I don't know if that's what might caussing the issue. I looked it up and the advise was to change Cycles Render Devices to CUDA and I did. And I checked if my graphics card is supported (it is). But integrator is still missing. I looked in other tabs too, it's not there. Anyways, I really enjoyed following this tutorial and it was my first time in blender ever, so thank you for creating it!
If anyone is stuck at 22:52 make sure that you do not have Proportional Editing turned on like I did. Also, if you can't figure out how to increase the number of bevel segments, scroll your mouse wheel (or trackpad in my case) up.
Hi, I wanted to ask, in the Render properties section, you could change the render under 'Sampling', however I don't seem to have that option? I think it's because of a recent update? I have only just started so idk where anything is lol
Anyone else having problems with the window boolean? when I select the "window Boolean" as the object for the Boolean modifier of the "room", the room's floor disappears, Would love to know why this happens and how the tutorial doesn't have this issue at all. Thanks! *Edit* Solved the issue moments after posting the comment! - in the drop down menu on the modifier ('Solver Options') tick the box that says "Self Intersection". Hope this helps anyone in the same boat 🤙
This is great so far! I'm just having issues at 3:45 as I have done the tutorial exactly so far but when I change the count to 4 the floor goes outside the wall on the y-axis and I'm not sure how to fix this!!!
I had the same problem but another comment pointed out the solution: While he says to have 7 segments at 2:45 he means 7 cuts to make 8 segments, so if you do one more cut it should hopefully solve your problem :) Hope this helps!
Voice over video is a bit challenging for beginners to follow. It was much better if you could slow down the speed of your video so we could understand the lesson not only watching it if it takes 1,5 still it is alright.
This is one of the best Blender tutorials that I've gone through - thank you so much! One question I have for you is that when I render out my images, the window doesn't actually render any light, it just appears as an empty box. Emission shader is set appropriately on the window panes with the rest of the window having the window material.
@@cfh-9328 Nice! I think I remember as well that I turned off the rendering for the boolean window instead of deleting it - that way it keeps the mask, but doesn't show in the final render.
19:06 when i apply object to window boolean it doesn't work the room just completely invisible. i need help pls (fix it) update: my wall not shining from light on window when I look on viewport shading
Way too fast for true beginners, but otherwise great tutorial and the final product is super nice looking! I would recommend just breaking for a second after each tool selection to give followers the chance to find and select the right tool, even if it's by hotkey, since it helps them to remember what they're actually using and why.
This was the easiest tutorial so far! I got stuck in a few areas and had to do it a different way, but nothing serious. You made this totally clear for a beginner. Subscribed!
I really love this tutorial, the fact you split it up into sections, and show us exactly what we are making in the bottom corner is really nice, thank you
Amazing tutorial, thank you so much! You know, making a few more of these would help out a ton of beginners! And I'm sure they would gladly subscribe to show the support.
better get a quadro p4000 8gb its way better for blender and rendering. 3090 is good but quadro is better at a lower price. If u buy just for blender take my advice. Gaming cards don't last in these environments
With the array filter you say set it to 4 but for me there is only room for 3.5 i cant fix this did it 6 times completely over again and still I have this problem how do I fix this bcs now the floor goes trough the wall
I cannot for the life of me find the render and viewpoint menu you change at 35:50, any ideas? Also, when I set the device as GPU Compute it grays out but the one in the video didn’t. Did i miss something?
Glad you enjoyed it! Who knows, maybe this video is the start of a long series of events that leads to your super successful 3D modeling career 20 years from now. 😅
I am having problem while rendering the image ....plz tell me how to solve it .... i have done in composite section the denoise part after which your photo appeared but not mine......wht to do???
When I add the bevel modifier, nothing happens unless I change the width type to absolute. But that makes some of the shorter edges non-uniform. I followed everything exactly up to this point and I haven't changed any settings prior to this video. How do I fix this?
Thanks bro, Got my isometric room ready. Came to blender to learn to make game assets. It's still hard even with Unity game engine experience. Can't imagine what the people without any 3D software must go trough
tbh for learning, your way of explaining is really bad. just came from Blender Guru's tutorial where he actually explains what he's doing, instead of telling you "do this and do that" if the tutorial is like this what am I even learning? I'm just copying your steps
hi, i have 3 very weirdly specific problems that are popping up in my design. can anyone help me out with it? the first problem i have is that the emission from the video isn't showing up in my rendered version. the second one is a bigger problem which is that whenever i try to add a camera into the scene, it somehow keeps picking the area below the bed as the main focal point and i've tried every which way to find a solution but every time i add a camera, and i hit the numpad 0 key, its showing me the blank space beneath the bed. when i manually move it by using the cursor as the controller, it messes up the bedframe for some reason. like either it disappears or its set as a different position.
NVM, a couple seconds after typing out my comment I figured it out lol. For anybody else who runs into this issue - turn down the proportional size to about 0.25
When i link the room's modification to the window boolean at 18:58 it ends up erasing the whole wall instead of the cube? anyone know how i might fix this?
I had the same issue. Try this, click on the wall > at its modifier Boolean click on the button right next the camera icon, then click move to first. now you can follow his instruction. I know this kinda late to reply because I just saw this tutorial, anw hope this help to anyone who have same issue
If you're using Blender 4.1, you'll have to right click the object and choose Shade Smooth. Then add a "Smooth by Angle" modifier to the object (under the Normals submenu).
Hi, well thanks for the video, I did everthing you said. when it is in render mood, window light looks perfect but when İ try to have the render image in the end, window light disappeared. Do you know what should i do :)
Is it just the window light disappearing or do all the lights change? One thing that comes to mind is that in the video, I'm working in Eevee for speed, but I'm rendering in Cycles which causes the window light to look different, so you'll need to change the emission value.
Really cool tutorial, but man, I don't see how this pace is for beginner's in the slightest. This is my second day at this and I'm only 3 minutes in and have had to pause and rewind more times than I can count. Really cool information, but I find it kind of hard to say this is a beginner friendly tutorial, especially when not explaining what any of these things actually mean or do. Like if I was thrown into a project on my own after this, I don't know how much I'd actually be able to accomplish. I'm going to try and stick with it though!
I'm having trouble with the night stand. When I select all the faces and inset them, they inset individually like with the wardrobe doors and not all at once like yours. I've tried looking for an explanation but can't find what I'm doing wrong.
Wonderful tutorial! Out of curiosity, why do we split and separate the floor tiles at the beginning? I was wondering how those two differ and why we need both.
hi,for separate the floor just select the face and press SHIFT +D for duplicated and press P for separate the floor and create other object check my channel i am make 3d cartoon room with blender
Thanks for pointing this out! I think you're right in that separating then rejoining the tiles together is an unnecessary step. It's been a while since I made this tutorial, but I think I was experimenting with different techniques for the floor and mixed two of them up together, introducing an unnecessary step in the process. Great catch!
@@leftbraincgart Thank you for the clarification. I love your tutorials, especially the jack o'lantern and this one. You've been such a great help to my friends and me as beginners in Blender
There's two major culprits I would check if you're running into shading issues. The first is for doubled up vertices. At 24:04, I go over how in edit mode, you can select all the vertices and merge by distance to get rid of any overlapping duplicated vertices. The second thing to check for are your normal orientations, which I go over at 32:47. In edit mode, you can try selecting everything and recalculate all the normals to face outside.
Am I the only one who loves this room without the extra lights when rendering with cycles? There's something really cool with how shadows works and looks. Awesome tutorial! Thanks!
It might help to know the basics of how Blender works before attempting this tutorial as some parts go fairly quick. In that sense, the donut tutorial would be a good place to start. Other people seem to have had success diving straight into this though, so it really just depends on your learning style.
Explained too fast without little introduction to basic commands. Also, the pillows are kinda sketchy, try not getting too many triangles, it'll be bad for your render.
For some reason when I get to the 4:05 part, my floors don't look like that. They have some weird black bars on the shading rather than the crevices on the floorboard. Not sure what's causing it
Hey, I'm super sorry for the late response! Hopefully you've managed to solve the issue by now, but if not, there's two common issues that come to mind based on your description. First, I would check for extra vertices that may have been created when extruding the floorboards. To do this, select your floor in Object Mode and switch to Edit Mode. With Vertex Select enabled, hit A to select all the vertices, then M to bring up the merge menu, and choose "By Distance". There'll be a little pop up at the bottom of your screen telling you how many duplicate vertices were removed. If you need a visual example of this, jump to 23:57 in the video to see me do this. If that didn't work, the next thing I would check are your face orientations (aka normals). I go over how to do this step by step at 32:47 and how to fix incorrect faces. If that still doesn't work, take a screenshot and throw it up on imgur.com/ so I can have a visual of the issue. I hope this helps and I apologize again for the late reply.
@@leftbraincgart Oh no you're totally fine! I appreciate the fact that you still respond to comments anyways. I was able to figure it out and I'm now working on the bed portion. Thanks again for this tutorial! It's really useful for a newbie like me! Would love to see more!
I'm glad to hear that you were able to sort it out. If you still remember and don't mind sharing, could you let me know what the issue was and how you solved it? That way I can be more mindful about problems that people potentially run into and can give better warnings in the future. If you can't remember or don't feel like typing it all out, no biggie; I'm just happy to hear that you haven't given up on the project. And I definitely have more projects/tutorials in the works, I'm just a little slow at making them. Some are more intermediate focused, but there'll be more beginner oriented ones to come, don't you worry.
brother you also talk waaay too fast I cant follow this man. all the keybinds all at once and then the option just doesnt show up, I have to go back and still cant find my ay through your rush of words
Hi, been trying about 30 times now to do the blanket. I have started over and over. When you extrude along the normals you have a smooth no extra faces that i can see in the video. I have more. when I bevel even with out the normals done it only goes up the top and not down the sides. It works if I make a new cube but not when i grab the faces from three sides and top and shift-D, left click, P and selection. HELP, thanks
After the bed part things started to get complicated for me hahahaha! I'm a real begginer in Blender. I am following along and I don't know why I can't put the Bevel modifier on the window, even doing again without coping the modifier and it is still have sharp edges >.
It's tough to say without seeing your actual project since there's a number things that could cause that issue, but the first thing I would check is that you're adding the modifier to the window object and not the boolean object you used to cut the hole in the wall. If the modifier is being added correctly, I'd check that the visibility of the modifier wasn't accidentally disabled. There's a little icon that looks like a monitor on the modifier (it's in between the square and the camera icon) that toggles the modifier visibility in the viewport.
I had the same problem. To fix it I selected everything and then used the merge function (keyboard M) and the Bevel modifier worked. Sorry if it's too late, but I hope it helps someone.
ı have a problem ı cant close to the object sometimes its like ı am trapped in a spider web . ı cant zoom in . how can ı fix this (ı think its very easy but ı just dont know how )
it happened to me as well...disable the camera icon beside the window boolean item.. it will hide the white extra window cube from appearing in the rendered image
11:50 another way to do this is you select all bottom vertex then press H to hide them, these vertex you hide won't be affected when you moving top vertex, after all press alt+H to unhide everything (sr my English is not good :D)
29:38 For people who doesn't know how to scale two axis, Scale, press shift then select the axis that I want to exclude. In this case, S -> Shift -> Z. I didn't hear he said shift z so HAHA
When i copy bevel from the bedframe to the window it's still like the window at 20:29 even with 180° at smooth shade and the bevel doesn't work too on the window
More beginner tutorial like this please! Love how you explain these things.
Will do! I'm knocking out a couple other things first, but I'll get back to making tutorials like these since there seems to be so much demand for them. Thanks for your feedback!
He is the best but unfortunately they don't have time to make it often. I believe he is the same as Tutor4u who is my favorite of all time in Utube. Whatever he has you will have the same as him. Check it out Tutor4u.
great tutorial but can you make it a little slower? I can't even follow some of the steps when i turn it to 0.25 speed 😅
Noted, thanks for the feedback!
@@leftbraincgart Yes. I had to constantly pause. Some of us have a hard time with key commands, they are very difficult to remember. You just rattle them off as if everyone already has them memorized and for some odd reason actually think key commands are an easier way to do things. Some of us are not like that, we have a tough time with key commands, they do not make intuitive sense to people like me. Not to mention carpal problems (caused by using key commands) make it difficult to hit keys on the keyboard accurately.
On top of all that, Blender does not o much in the application to give good hints as to what the key commands are, so If I miss something, I have to back up the video and slow own, because I can not find the corresponding operation in the GUI, because all you did was rattle off a key command with no mention of how to do it without a key command.
Why is is ALWAYS about the friggin key commands!!!! You Blender people just LOOOOOOOVVVVEEEE your key commands.
I HATE blender's key commands!
Other than that, it would be an awesome program, but because of the key commands, I have never been able to get over the learning hump for Blender. :(
OMG the speed is so annoying, this is not for beginner because it doesnt even explain how to use the properties for beginners
just turn down the speed on youtube's settings
Today i've learned a lot of things, thx for the tutorial.
amazing tutorlal ❤❤ love from Pakistan
Anyone else encountering weird things on the warddrobe when shadesmoothing + applying the bevel modifier from the window at 24:30 ish? welp
There's two major culprits I would check if you're running into shading issues.
The first is for doubled up vertices. At 24:04, I go over how in edit mode, you can select all the vertices and merge by distance to get rid of any overlapping duplicated vertices.
The second thing to check for are your normal orientations, which I go over at 32:47. In edit mode, you can try selecting your wardrobe and recalculate all the normals to face outside.
10:34
18:38
sometimes the bevel won't work, in this case you need to go to the modifier, go to geometry, and click off the clamp overlap button
ty
Nice.
This is the first tutorial aI followed after completing the Blender Guru’s Donut tutorial. I am glad to say that this tutorial gave me extreme familiarity with Blender, which I needed as a beginner. Based on the things I learned here I was able to make blender gurus photorealistic chair almost perfectly and I’ve yet to face a problem I couldn’t solve based on the things I learned here. This should be everyone’s introductory video to Blender!
I'm glad to hear you've been having so much success with your Blender progress and that my video was a part of it. Thanks for letting me know!
I JUST finished the Donut tutorial and your comment made me do this as a second tutorial, best choice ever!
@@MsFaenya Well, now go do the Blender guru’s chair. You’ll get better very quickly, I got a good gig shortly after completing the chair. I’m happy I helped!
same here lol
u still animating? how's it going?
BTW, I stumbled a lot when applying the bevel modifier, they don't always work well. After searching for solutions, I realise that this could be resolved by simply applying the scale for the objects (ctrl+A). I don't know why you won't have the same problem but I think it's worth sharing.
This is a really nice tailored tutorial and it's beginner friendly. Thank you for explaining every step, it's super helpful!
In case anyone is struggling to find out how he was able to render the image at the end without clicking anywhere, well he just used F12. The rendering windows will pop up.
2:45 i followed the identical process but the plan did not separate from the cube. How do i separate the plan from cube, pleaseeeeT.T
This is way to fast, u lost me on the camara part i didnt understand anything from this vídeo 😭
I have this issue, after rendering the project it doesn't look the same. Everything is kind of dissolved i guess, and something bad is happening with a floor. When I delete denosing it's really noisy so that's also bad. Also I don't seem to see integrator settings and render, viewport. I don't know if that's what might caussing the issue. I looked it up and the advise was to change Cycles Render Devices to CUDA and I did. And I checked if my graphics card is supported (it is). But integrator is still missing. I looked in other tabs too, it's not there. Anyways, I really enjoyed following this tutorial and it was my first time in blender ever, so thank you for creating it!
If anyone is stuck at 22:52 make sure that you do not have Proportional Editing turned on like I did.
Also, if you can't figure out how to increase the number of bevel segments, scroll your mouse wheel (or trackpad in my case) up.
Nice tutorial but brother explain slow becouse i need to pause the video 225 times in order to understand something
For 29:56. How can I flattened out the top of the light?
The way I did was to manually scale X and Y axis, because from the video is not clear what he did to flatten only the top.
I beg you help. 19:06. the cube doesn't disappear, the window doesn't work. What to do? I'm trying to make this damn window for an hour....
Me too, why not work
same
For some reason, when I press shift+a, it shows up mesh other than add, does anyone know how to fix it?
Hi, I wanted to ask, in the Render properties section, you could change the render under 'Sampling', however I don't seem to have that option? I think it's because of a recent update? I have only just started so idk where anything is lol
I have a problem at @3:03, i have followed everything up this point when i pressed 2, nothing happens. Any idea why?
Anyone else having problems with the window boolean? when I select the "window Boolean" as the object for the Boolean modifier of the "room", the room's floor disappears, Would love to know why this happens and how the tutorial doesn't have this issue at all. Thanks!
*Edit*
Solved the issue moments after posting the comment! - in the drop down menu on the modifier ('Solver Options') tick the box that says "Self Intersection". Hope this helps anyone in the same boat
🤙
8 months later, but I had the same problem and your solution worked! thanks
This is great so far! I'm just having issues at 3:45 as I have done the tutorial exactly so far but when I change the count to 4 the floor goes outside the wall on the y-axis and I'm not sure how to fix this!!!
I’m having the same problem
I had the same problem but another comment pointed out the solution:
While he says to have 7 segments at 2:45 he means 7 cuts to make 8 segments, so if you do one more cut it should hopefully solve your problem :)
Hope this helps!
@@baby_lemon933 THANK YOU!!!
tysm @@baby_lemon933
Voice over video is a bit challenging for beginners to follow. It was much better if you could slow down the speed of your video so we could understand the lesson not only watching it if it takes 1,5 still it is alright.
This is one of the best Blender tutorials that I've gone through - thank you so much!
One question I have for you is that when I render out my images, the window doesn't actually render any light, it just appears as an empty box. Emission shader is set appropriately on the window panes with the rest of the window having the window material.
Same happened to me. Not sure how to fix it.
Deleting the boolean window fixed it! So that's the issue.
@@cfh-9328 Nice! I think I remember as well that I turned off the rendering for the boolean window instead of deleting it - that way it keeps the mask, but doesn't show in the final render.
The boolean cut on the wall has to be applied. Then the cube used as a cutter has to be deleted.
19:06 when i apply object to window boolean it doesn't work the room just completely invisible. i need help pls (fix it)
update: my wall not shining from light on window when I look on viewport shading
Way too fast for true beginners, but otherwise great tutorial and the final product is super nice looking! I would recommend just breaking for a second after each tool selection to give followers the chance to find and select the right tool, even if it's by hotkey, since it helps them to remember what they're actually using and why.
just go to setting not blender one but the video one and just go playback speed and slow the time speed down
thank god, im abosultutly new to blender, and this video just feels like its made for people with a basic idea of how blender works.
Yeah, I'm stuck at the 4:30 mark where you have to select the two walls separately to duplicate them but you can't because it forms part of the cube.
This was the easiest tutorial so far! I got stuck in a few areas and had to do it a different way, but nothing serious. You made this totally clear for a beginner. Subscribed!
I really love this tutorial, the fact you split it up into sections, and show us exactly what we are making in the bottom corner is really nice, thank you
you go too fast dude
The cube that I used for the Boolean modifier is showing up in my final render even though I hid it. What do i do?
Amazing tutorial, thank you so much!
You know, making a few more of these would help out a ton of beginners! And I'm sure they would gladly subscribe to show the support.
That's the plan! I have a few more modeling tutorials in the pipeline; they just take me a while to make because I want to make sure I get them right.
The speed, explanation, and modeling difficulty were so perfect for me! thank you so much😊
I'm so happy you were able to follow along! Thanks so much for the feedback!
Great Tutorial 😊 .But my 3d model have little issue 37:15 after rendered my design top of the mattress became black
I have the same problem... Were you able to solve it?
I'm getting a 3090 Ti PC in a few days time just for blender 😍 cannot wait to start my 3D journey 😁👍 I'll head straight to this video once I start.
better get a quadro p4000 8gb its way better for blender and rendering. 3090 is good but quadro is better at a lower price. If u buy just for blender take my advice. Gaming cards don't last in these environments
A 3090 Ti! I'm super jealous. Enjoy all that GPU power!
With the array filter you say set it to 4 but for me there is only room for 3.5 i cant fix this did it 6 times completely over again and still I have this problem how do I fix this bcs now the floor goes trough the wall
thanks for tutorial sir...i hope u make a vidio tutorial again for beginner 3d like a me
I cannot for the life of me find the render and viewpoint menu you change at 35:50, any ideas? Also, when I set the device as GPU Compute it grays out but the one in the video didn’t. Did i miss something?
I have no idea why this was in my recommended videos cause I don't even know what Blender is, but it was still interesting!
Glad you enjoyed it! Who knows, maybe this video is the start of a long series of events that leads to your super successful 3D modeling career 20 years from now. 😅
I am having problem while rendering the image ....plz tell me how to solve it .... i have done in composite section the denoise part after which your photo appeared but not mine......wht to do???
When I add the bevel modifier, nothing happens unless I change the width type to absolute. But that makes some of the shorter edges non-uniform. I followed everything exactly up to this point and I haven't changed any settings prior to this video. How do I fix this?
Amazing tutorial, i've never rendered anything in blender, but i was so easy to figure it out with everything you showed!
I'm happy to hear you found my tutorial useful. Thanks for letting me know!
who knows the colour code for all the objects, i cant really see the colour codes he is using
Why my matress during the rendering process is black? 😢😢😢😢😢😢😢😢😢 36:34
i got lost at alt E hit S and extrude inwardly... mine went batsh%t crazy
33:25, did this step and everything but my walls were red..... the bed, the lamps, wardrobe, window, wall art, floor, plane.... what did I do wrong?
3:47 the floor goes longer than room, any fix?
Thanks bro, Got my isometric room ready. Came to blender to learn to make game assets. It's still hard even with Unity game engine experience. Can't imagine what the people without any 3D software must go trough
tbh for learning, your way of explaining is really bad. just came from Blender Guru's tutorial where he actually explains what he's doing, instead of telling you "do this and do that" if the tutorial is like this what am I even learning? I'm just copying your steps
hi, i have 3 very weirdly specific problems that are popping up in my design. can anyone help me out with it? the first problem i have is that the emission from the video isn't showing up in my rendered version. the second one is a bigger problem which is that whenever i try to add a camera into the scene, it somehow keeps picking the area below the bed as the main focal point and i've tried every which way to find a solution but every time i add a camera, and i hit the numpad 0 key, its showing me the blank space beneath the bed. when i manually move it by using the cursor as the controller, it messes up the bedframe for some reason. like either it disappears or its set as a different position.
Is anybody else running into issues at 28:10? I'm trying to modify that one edge loop, but the whole thing keeps expanding.
Also, this is after turning on proportional editing.
NVM, a couple seconds after typing out my comment I figured it out lol. For anybody else who runs into this issue - turn down the proportional size to about 0.25
@@angelsface200 thank you lol
for some reason when I change the color of the floor, it also applies to the walls and floorboard, how do I change this?
Theres no side options like item in blender 4.1 is tthere equivalent for that? Help
Learning Blender is such a pain ! Thank you for making it a walk in a park
I'm glad you found the video useful. Thanks for letting me know!
too much fast.. make soft video
hi, check my channel i am make 3d cartoon room with blender
When i link the room's modification to the window boolean at 18:58 it ends up erasing the whole wall instead of the cube? anyone know how i might fix this?
I had the same issue. Try this, click on the wall > at its modifier Boolean click on the button right next the camera icon, then click move to first. now you can follow his instruction.
I know this kinda late to reply because I just saw this tutorial, anw hope this help to anyone who have same issue
Hi...
I cannot find Autosmooth in Data
If you're using Blender 4.1, you'll have to right click the object and choose Shade Smooth. Then add a "Smooth by Angle" modifier to the object (under the Normals submenu).
@@leftbraincgart Thank You :)
This goes too fast I am only at 4 minutes and it has taken me 10 minutes :(
Hi, well thanks for the video, I did everthing you said. when it is in render mood, window light looks perfect but when İ try to have the render image in the end, window light disappeared. Do you know what should i do :)
Is it just the window light disappearing or do all the lights change? One thing that comes to mind is that in the video, I'm working in Eevee for speed, but I'm rendering in Cycles which causes the window light to look different, so you'll need to change the emission value.
this was so very helpful for me since im still a beginner
Thank you for making this video
hi, check my channel i am make game assets tutorial with blender
Glad it was helpful!
Really cool tutorial, but man, I don't see how this pace is for beginner's in the slightest. This is my second day at this and I'm only 3 minutes in and have had to pause and rewind more times than I can count. Really cool information, but I find it kind of hard to say this is a beginner friendly tutorial, especially when not explaining what any of these things actually mean or do. Like if I was thrown into a project on my own after this, I don't know how much I'd actually be able to accomplish. I'm going to try and stick with it though!
I'm having trouble with the night stand. When I select all the faces and inset them, they inset individually like with the wardrobe doors and not all at once like yours. I've tried looking for an explanation but can't find what I'm doing wrong.
press I again and it'll work
This is a great tutorial, but its a bit too fast
Wonderful tutorial! Out of curiosity, why do we split and separate the floor tiles at the beginning? I was wondering how those two differ and why we need both.
hi,for separate the floor just select the face and press SHIFT +D for duplicated and press P for separate the floor and create other object
check my channel i am make 3d cartoon room with blender
Thanks for pointing this out! I think you're right in that separating then rejoining the tiles together is an unnecessary step. It's been a while since I made this tutorial, but I think I was experimenting with different techniques for the floor and mixed two of them up together, introducing an unnecessary step in the process. Great catch!
@@leftbraincgart Thank you for the clarification. I love your tutorials, especially the jack o'lantern and this one. You've been such a great help to my friends and me as beginners in Blender
@@thomaschang3849 Glad to hear my tutorials have been of some use, thanks for letting me know!
i know this comment is late, but when i shade the window smooth and add the bevel modifier, it goes all weird and shaded and not... smooth. help!!!
There's two major culprits I would check if you're running into shading issues.
The first is for doubled up vertices. At 24:04, I go over how in edit mode, you can select all the vertices and merge by distance to get rid of any overlapping duplicated vertices.
The second thing to check for are your normal orientations, which I go over at 32:47. In edit mode, you can try selecting everything and recalculate all the normals to face outside.
Thank you
sir i like your channel just a question regarding your content , is your channel get monetized?? and what is the Rpm of Such content. thank you
Am I the only one who loves this room without the extra lights when rendering with cycles?
There's something really cool with how shadows works and looks.
Awesome tutorial! Thanks!
@MZ 😂
all right, i'll brood alone in the corner of my dark room...
Which version of blender is this?
when i do the final render the back part of the window still sticks out for some reason even though i extruded it in, anyone know how to fix?
This happens to me too! Did you figure it out?
@@AidenMiranda-ge3ux yes you need to make sure to delete the window boolean and then the render will work
Do i learn donut before doing this ?
It might help to know the basics of how Blender works before attempting this tutorial as some parts go fairly quick. In that sense, the donut tutorial would be a good place to start. Other people seem to have had success diving straight into this though, so it really just depends on your learning style.
GREAT TUTORIAL! but bro if its a beginner tutorial pls just make mess intructions per second
Explained too fast without little introduction to basic commands. Also, the pillows are kinda sketchy, try not getting too many triangles, it'll be bad for your render.
For some reason when I get to the 4:05 part, my floors don't look like that. They have some weird black bars on the shading rather than the crevices on the floorboard. Not sure what's causing it
I cannot get past the floors either. Too many keyboard shortcuts, hard to follow, easy to miss a step. I restarted 4 times before giving up.
Hey, I'm super sorry for the late response! Hopefully you've managed to solve the issue by now, but if not, there's two common issues that come to mind based on your description.
First, I would check for extra vertices that may have been created when extruding the floorboards. To do this, select your floor in Object Mode and switch to Edit Mode. With Vertex Select enabled, hit A to select all the vertices, then M to bring up the merge menu, and choose "By Distance". There'll be a little pop up at the bottom of your screen telling you how many duplicate vertices were removed. If you need a visual example of this, jump to 23:57 in the video to see me do this.
If that didn't work, the next thing I would check are your face orientations (aka normals). I go over how to do this step by step at 32:47 and how to fix incorrect faces.
If that still doesn't work, take a screenshot and throw it up on imgur.com/ so I can have a visual of the issue.
I hope this helps and I apologize again for the late reply.
@@leftbraincgart Oh no you're totally fine! I appreciate the fact that you still respond to comments anyways. I was able to figure it out and I'm now working on the bed portion.
Thanks again for this tutorial! It's really useful for a newbie like me! Would love to see more!
I'm glad to hear that you were able to sort it out. If you still remember and don't mind sharing, could you let me know what the issue was and how you solved it? That way I can be more mindful about problems that people potentially run into and can give better warnings in the future. If you can't remember or don't feel like typing it all out, no biggie; I'm just happy to hear that you haven't given up on the project.
And I definitely have more projects/tutorials in the works, I'm just a little slow at making them. Some are more intermediate focused, but there'll be more beginner oriented ones to come, don't you worry.
brother you also talk waaay too fast I cant follow this man. all the keybinds all at once and then the option just doesnt show up, I have to go back and still cant find my ay through your rush of words
Shift A doesnt contain a camera anymore yikes, guess Imma go look for that for ages now
@@Deppie_____ gotta be in object mode i was searching forever too
I´m happy doing this tutorial jejejejeje, I already made a mention in my chanel to you, I hope you like it, thanks Left Brain CG Art
Hi, been trying about 30 times now to do the blanket. I have started over and over. When you extrude along the normals you have a smooth no extra faces that i can see in the video. I have more. when I bevel even with out the normals done it only goes up the top and not down the sides. It works if I make a new cube but not when i grab the faces from three sides and top and shift-D, left click, P and selection. HELP, thanks
When you are using the auto smooth normals, you said to turn it up to 180, but never explained why. Can you please elaborate
My floor appears black in viewport shading mode, and the area lights have very minimal effect, can someone help me?
After the bed part things started to get complicated for me hahahaha! I'm a real begginer in Blender. I am following along and I don't know why I can't put the Bevel modifier on the window, even doing again without coping the modifier and it is still have sharp edges >.
It's tough to say without seeing your actual project since there's a number things that could cause that issue, but the first thing I would check is that you're adding the modifier to the window object and not the boolean object you used to cut the hole in the wall.
If the modifier is being added correctly, I'd check that the visibility of the modifier wasn't accidentally disabled. There's a little icon that looks like a monitor on the modifier (it's in between the square and the camera icon) that toggles the modifier visibility in the viewport.
I had the same problem. To fix it I selected everything and then used the merge function (keyboard M) and the Bevel modifier worked.
Sorry if it's too late, but I hope it helps someone.
ı have a problem ı cant close to the object sometimes its like ı am trapped in a spider web . ı cant zoom in . how can ı fix this (ı think its very easy but ı just dont know how )
Wow, lelah bung, baru nyampe 30 menitan. Tp salah, ulang, salah lagi ulang lagi. Kadang mulai dari nol . Agak kurang nangkep bahasanya. Semangat
3:20, when I grab an item the whole thing moves. How do I fix that?
Oh wait I had proportional editing enabled.
its not a beginner friendly i almost lost. although i go step by step with ur video but idk what is wrong T__T
Can you tell me which GPU card you use to be able to create videos like that, thank you!
im stuck at 1:41 cos somehow when i toggle S it goes into crazy prisms and spikes and shizz and i dunno how to get past
Just click once and do it slowly maybe ?
Im stuck on the wardrobe shading part when I do all the things you spammed in 3 seconds is makes it look all weird
Thanks Buddy So much Helpful You should Make more videos Why did you stop making content That was superb
You Explain too good man Keep it up!
As I do the floor boarder's and bevel the wall down it becomes crooked any fixes
failed at the final part. all going well except the window appears in whole white color and i no idea how to fix it...
it happened to me as well...disable the camera icon beside the window boolean item.. it will hide the white extra window cube from appearing in the rendered image
11:50 another way to do this is you select all bottom vertex then press H to hide them, these vertex you hide won't be affected when you moving top vertex, after all press alt+H to unhide everything (sr my English is not good :D)
29:38 For people who doesn't know how to scale two axis, Scale, press shift then select the axis that I want to exclude. In this case, S -> Shift -> Z. I didn't hear he said shift z so HAHA
Thank you he didnt say anything about it 😢
When i copy bevel from the bedframe to the window it's still like the window at 20:29 even with 180° at smooth shade and the bevel doesn't work too on the window
Bro was going a little to fast for me personally I had to pause and go back so many times. other than that tho great job I love this
I m stuck at the window part
I tried it multiple times but I can't extrude the front face
Amazing tutorial ! Could you tell me what's the font you use in the cover please?
Thanks! The font is Harlow Solid Italic.
@@leftbraincgart Thank you so much!
THANKYOU SO MUCH , amazing tutorial i just subscribed your channel .....going to learn more from you 🥰🥺
When I click 3 it just goes to the side what’s a alternative way to do it to select faces?
Love this video! I wish more was made like this! Slow and informative, excellent work. :)