Hey. just stumbled across your videos. Liking them so far. Ive got a question about the pent roof. I'm thinking about building a shed/Garage 20 x 16.5 ft (due to planning). Can i use this pent roof design on the 16.5ft span? if so, what size after would you recommend? Thanks
Thank you very much for everything you do and everything you are. I still remember the day when my dad saw my first power tools (I bought 4 at once) “do you know how to use them?” I said “No! But I will learn” he was stunned by my response, I don’t remember him doing any diy and more so I don’t remember being taught how to fix something, anything… alcoholic, very abusive, physical and mental, a typical narcissist. Today, 17years later, I’ve rebuilt the roofs for an extension, fitted floors, plumbing, some electrics. I love dyi and I’m extremely grateful for people like yourself to which I look up to. Many young men like myself, who never had any information, are very very grateful. Thank you “diy dad of the Internet” 🤗
I really like how you know what mistakes I'm going to make before I make them. Then you explain why not to do it the wrong way. It really ensures that people will do it right when they know the why.
Hi, I know this series is 5+ yrs. since you posted it but, I'd still like to thank you for your VISUAL "show and teach". I am a 110% visual learner. I can't read/follow a manual/blueprint if my life depended on it. They somehow, bore me to near tears... That goes for nearly ALL aspects of my life... SHOW me something once or twice, and I can repeat it and sometimes even improve or tweak it to my liking... I don't know how many manuals/blueprints/whatever I have sitting in drawers, still in their original plastic covers and not opened... Be it electronic, furniture build, etc. etc... Same when I was changing the head gaskets on my old 1976 V8 Pontiac as well as installing new valves... YES, I did buy the "book" on the model of the car I had but, only thing I read and made sure to follow, was the model number of the parts and the weight the valves were to be tightened. The rest of the descriptions were just messing with my brain and my own visual "picture" of how things were to look/be when finished. Yeah, it helped that all of my boyfriends up until then had been mechanics of one sort or other and I would always be required to help/hold whatever in place. Building on to the porch of my house, no drawing/blueprint... Same with building/remodeling the attic into living space/bedrooms for the kids... Oh and yes, I am a woman and yes, I tend to drive most men crazy... LOL Heck, I wouldn't have it any other way!! 😁 Written down measurements? Yes... Have had a few friends come out over the years saying they wanted to help but, they left pretty soon since I didn't have a blueprint for them to follow. I have that blueprint visualized in my head. GO AWAY, I can do this myself... 🤯😁 No, I'm not ungrateful, it's just that if I do it myself, I get it done the way I WANT IT DONE... Yeah, unscrew, remeasure/cut and screw back again... That's just part of the game. And yes, I use screws for EVERYTHING!! Same as with manuals/blueprints that drive me ape shit crazy... I can't even nail in a tack without bending it 6 ways from Sunday!! Plus, much easier if/when you have to remove something since, you kinda got it wrong the first time or, second time... Anywho... I have now built my chicken coop, following MOST of your "series" of "How to build a shed"... Difference? since it's a chicken coop and it's up off the ground about 2 feet, I have a wood/plywood floor, covered in thick vinyl flooring mat, that goes up the sides about 6 inches. Easier to keep clean. Other than that, just good grade insulation in walls, floor and ceiling. (followed your "deck building/shed" upload for that) For the electrical, I followed your upload on the "temporary" electric installment, just added inner plastic tubing that the cables go through since I felt it would be safer for the chickens and also since I have inner walls, much easier if I have to redraw the wiring for whatever reason... Plus added corrugated metal roofing, along with a water catchment system... I used to live very rural off grid in mid BC Canada for about 5 yrs but, came back to Sweden a few years ago to be closer to my adult kids. So, yep, I know what winters and a heck of a lot of snow can do to a roof... Anyhow, IF you did manage to get through this whole "novel"... Thanks once again!! //Solani
You're so entertaining. I'm making a greenhouse with a polycarbonate roof, so this helps tons. It gets HOT in this summer desert area (NW AZ) so I have real windows with screens, and vents with screens on the high since of the front that I can open or shut, then your chipboard 2' to 3' from the bottom, and south side of the project is all multi-layer 1/4" polycarbonate sheeting above the 2-foot level. You've helped a lot, and building it in 90 degrees isn't fun. It helps to learn from a pro that's FUN to learn from! We have only 1 month of San Diego weather in between HOT and COLD here, and 1 day a year of snow. So I still want to be able to grow a small avocado tree in my greenhouse! I'm 74 so I take my time.
You should have so many more subscribers, your lessons are gold.....I am a woman and I am pretty sure I can build following your explanations, The people who gave thumbs down to this videos are probably contractors who are angry that you are teaching people how to save money.
I have never, I repeat NEVER watched an hour long video on how to build a shed. But I am so glad I watched this one! Just got into woodworking,went mad and bought loads of power tools then realized I have nowhere to store them? Well, within an hour i also learned how to build a perfect shed to store those tools :) I love the fact that the way you built it is not perfect or within the "norm", but dam it looks just as good if you had. And you made the video so easy to watch with your humor and well explained steps. New sub from me,and well deserved.
Quality video. At last a video that doesn't insist on perfection for the general homeowner building a shed. This video will massively encourage homeowners to have a go at building at home and give massive satisfaction With something like this, if it looks right, it is right 😉
Hey - I'm a 75 YO woman that doesn't do woodworking or building of anything. Even I found this very interesting and learned so much. You constantly added tips that increase a persons efficiency and ability to work alone. Well Done! Had to subscribe to see what else you have. Thanks.
Awesome! I am a woman who builds alone. I am starting work on my second tiny house and I love these tips and tricks. IT will make it easier for my second build because I am 50 now. Excellent tricks!
I like the way this guy teaches and thinks: practical. Not hung up on the technicalities, but efficient and easy to follow. Thanks, great series of videos!
Jeff you're the Bob Ross of construction! I've watched your shed build video multiple times. I'm building a 12x20 shed at my house and your input has helped immensely. The way you describe everything is very easy to digest and I recommend your page to all my friends renovating their homes. " I'm a big boy and I know what a 1/4" looks like." LOL
I am building a 8 x 8 shed 8' tall using a timber frame approach with treated 4x4 posts. I used 2x6 boards 10' long ilo of 2x4's for the roof deck. I had a total of 6 boards but could not lift the frame up to get it on the roof. I purchased two 12' ratchet straps and tied the straps to the top cross beam of the shed and the bottom of the roof deck. Tied the frame to the top beam to keep it upright. Used the ratchet straps to raise the deck up. Alternated resetting the straps to get the deck high enough where I could pivot the deck onto the top of the shed. Worked like a charm. Thank you for the video that gave me the information to get his done. Note: The shed will have a sheet metal exterior and the siding has not been installed yet so nothing was in my way to secure the ratchet straps.
love it! You are such a good teacher. Even though I'm a female who doesn't build anything, when there is something interesting you're teaching I watch the whole vid. I started here, now to back back to watch how you built this shed, lol. Thanks!
I used your trick of using the actual factory cut plywood to finish squaring up the frame and it worked like a charm. Really appreciate your video. Thank you!
This is an absolutely great DIY video with tremendous amounts of detail explained in laymen’s terms. Big fan, keep up the great work, I’ve learned a great deal tonight.
Seriously...as a Maine girl who grew up building stuff (like our house) with her dad (but not paying enough attention) your videos are giving me the confidence that I can do this. I've bought a little piece of land on a lake and can't put a real cabin on it yet but will need a shed, even while we are tenting. The pre-fab ones seem not worth the money and this series has sealed the deal for me. Had I not already subscribed, the Red Green reference would have put me over the edge. I wish we were a little more "Canadian" here south of the border. 😁
i remodel and flip houses here in Pittsburgh, PA (USA) and know all the building trades. i often like to watch DIY videos here on youtube to see if i can pick up time-saving or "best practices" tips. this video is very long but i enjoyed watching it. you did a very nice step by step explanation of "shed building 101" as you noted. i will look for another one of your videos to watch for entertainment - and learning. none of us are ever too "smart" not to "learn" something from someone else!
I'm building a coop basically on my own.. I'm a 49 yr old 5'3" woman, this whole video is my way of thinking minus building experience! Lol I'll update on how it goes...I was going to do my sheeting after the roof but I do believe this video has changed my thought process 😉
Very well done video wise. Lots of good information with explanations versus unnecessary filler stories and off topic distractions. This is a great "how to" video that moves along at a pace that is lively without rushing. There are many building points that are explained clearly which in other videos I have to search the net for to clear up. I've bookmarked it and will have to watch it a number of times as there is a lot of practical good information in it. Thanks.
I would like to say thank you Jeff! from the bottom of my heart. I am working as a building maintenance tech 2 and planning to have remodeling classes for my future own business but I felt already went miles away with your all 101 free courses Lol. I wish you are hear in MD to work with you. Amazing engineering lesson Thank you again.
I like your modesty Jeff, but I'd be willing to bet your a pretty strong guy too. Like me your wisdom insures you choose wisely lol! Great job on the vids! I really enjoy watching. For me, RUclips has completely replaced television. It's finally so nice to be able to watch what I chose to watch and learn something. Your channel is right up there. Keep up the good work!
Jeff, I am building a small second story 8x10 deck by myself and watching you do this alone makes me chuckle. This channel is the best. So many good tips
One thing I really love about this type of roof is that, if you can face the door north, that means your entire roof is exposed south, which means you can install solar panels over the whole thing and have POWER in your shed without running a power line. Should at least be enough power to run a couple of LED lights inside as well as charge up your tool batteries.
Great Video. It looked like your drip edge is right up against the facia with no gap. You can slide your fingers behind it to create the gap. The reason is surface tension. Water will wrap around the bottom of your drip edge and then fall to the ground. If there is no gap, it will wrap around the bottom and then grab your facia making your water diversion system less effective.
Thanks for another great video! I learn so much. From you! I have a tip you may not know.. I iron on my saw horses, and saw on my ironing boards. Get at least 4 ironing boards(nobody irons any more, so you can pick them up at thrift stores, or beside the road). They stop exactly where you want them to, hold quite a bit of weight.. perfect for long trim, and store easily. I iron edge banding on plywood on my sawhorses. 😃😊
Thanks! I’m about to move onto the roof build on my shed. I’m a first-time shed builder and this video is incredibly helpful! Warm regards from Whitehorse, Yukon.
Thank you for your many videos. I have enjoyed many of them and am currently watching the shed series. I have a question about the roof rafters. You are not using "bird Mouth" cuts. Is the roof stabile without them? Thanks for all your hard work.
No he is not cutting bird's mouth. I would use hurricane ties in this case to give it stability he doesn't mention if he did or not. I would do hurricane ties even if I did cut bird's mouth because with a big overhang that is how wind blows a roof off the house. It gets under the overhang and if you have a large area for the wind to catch, goodbye roof, it needs to be held in place well.
Nice Jeff . I'm a framer by trade and I just built a killer shed. Fence n partioned a garage . I use your drywall techniques from way back . I'm good at my trade . You are too . You simplify things . I tell peeps especially dyi peeps to check your channel out . Cheers
Followed your video to build my own shed in the backyard. Was challenging as I am not in any type of skilled labor but with your videos it came out MUCH better than I ever expected it would!!! Absolutely amazing video!!
Great project. I built a storage shed about 25 years ago using the same method except I used 2x6 for the roof rafters. At first I had rolled roofing but 2 years ago recovered it with metal roofing and had to cut the bottom part of the OSB because the grass wicked up water and rotted out the bottom of the OSB. I replaced just the bottom section with 1 James harding piece of siding and dug a trench to cut out the grass, filled it with small gravel and garden brick on top so the grass would not grow back.
My man, I have some constructive criticism to share with you. Please bare in mind, I very much appreciate the work you put into not only the project, but the time taken to film if you will, your process. I started the trade in the later 80's. I learned from old school guys. Men that sawed off most of my hammer because I wasn't holding it properly, lololol. They were brutal in how they taught me. This is a lost art, and it is an art! They made sure I didn't forget it. The work ethic combined with the work ethic, combined with the work ethic, after year's, taught me! Again, no harm intended!! I sincerely mean this. This was a great basic way of teaching your audience about the speed square, or the framing square. You almost had it. In my opinion, you missed the opportunity of the "WHY." You took too many shortcuts, without explaining the "how". You were right there with the square. Rise and run... you missed this opportunity for your audience. No birds mouths, to lock in the rafters to the plates. A D.I.Y. should at least begin to know the "what", and the "why". It almost seems like I just watched "common core" math or something. What you did, I guess works. The shortcuts and attention to detail and the "WHY", was non existent. Again, I mean no harm, I appreciate the "how" of what you did. I can appreciate it because I understand what and why you did this. But for the audience, to me, your teaching "common core" carpentry! If I didn't say anything here, my predecessors would probably cut my tongue instead of just the unused handle of my hammer. Please keep this in mind. Your audience is much smarter than you might think. Thank you though, sincerely!!!!!!! david, 38 yr. Carpenter, aspiring woodworker, with a whole world of knowledge and technique still for me to learn. God bless you!
I enjoyed your presentation. Especially, when you indicate, don't worry, wood is wood. It is a shed, but do everything, with the thought that I did this as close as possible. Think positve and except the challenge. I'm an all around wood worker, and specialies, in Finishes. Learned alot from your video. Great ...
Thanks for the awesome videos! I have a question on the details of where the roof rafters meet the top plate. Is it OK just to have the roof weight just resting on the edge of the rafters? do you not have to cut bird mouths or angle the top plates? thanks!
Great tips shared in this vid. Here are a couple more. 1- The water divert system will work, but now too much water will go to one side. A water spout along the receiving water side of the roof can help the water get to the ground without impacting the plants below. 2- It is just a shed, but close the soffits. Bees love openings like that to nest inside.
I usually view the simple things as ingenious. Brilliance, on the other hand, is designing a hip roof for an old workshop replacement at three times the cost. Apart from facetiousness, thanks much for the great idea! You must be a genius!
Yeah. Like I'm learning to do this, watching dozens of videos. Watched many explaining how to attach joists to the posts coming up from the ground (I'll be putting mine on posts, not skids). All the smart videos do a simple, elegant way: Notch the post, set the joists in, bolt it in. Then later I see some guy sandwiching the posts between two joists, making braces, etc etc etc. All just complicated silliness. I'm thinking "What are you going to do when it's time to renovate years down the line?" Simple elegance is the way. But one lesson I learned (or reinforced) is watch a LOT of videos. Don't just watch one and think "This guy looks confident. I'll do it his way" because that video may be the bad way. If you see 20 videos and 18 are all doing it one way with a good explanation for as to why, do it that way.
I've watched a lot of shed videos and your system is so easy brilliant techniques. I always say a smart man is a lazy man and your systems are easy to follow and you can even do it by yourself thank you for sharing this
I'm about to start a tapered roof shed build and am pretty good but have learnt so much from this. Just goes to prove there's more than one way to do a job. Some great tips I'l be using. In particular to way to determine the angle cut for the joists. Excellent and thank you
Awesome job on the shed building series. Gonna use a lot of your info on my 12 x 20 lean-to shed. But what really got me hooked was the Red Green quote. Anybody that can do that on the fly is all right in my book. Keep up the good work!
Awesome. He's slightly outta' breath all the time; makes little mistakes; doesn't worry about the little stuff and gets it done using a minimum of tools. Same way I do my stuff. These crazy Canucks.
Excellent beer drinking project, well coffee in the morning anyway. If you play your cards right, could stretch it out through the weekend until Wednesday. That will keep the wife off your back! Good job, nice tips!
"If they don't find you handsome, they should at least find you handy." I don't think the coiner meant it that way, but it works (thank God)😄 I appreciate you Jeff. So many videos that miss your detail. You have helped me tremendously!
Jeff you inspired me and now after the wood prices have come back down I'm building a 10.5' x 16' lean-to shed. She's all framed in and three of the four sides up - tarp on roof for now as I search out aluminum products. Trees above that drop all sorts of stuff so I'd like something smooth to help with self cleaning? Oh, I did use and bought precovid the LP smart side T1-11. So easy to put up! screws almost hide themselves in the groves. Jeff, thanks so much - stay well! EDIT: went with standard 3-tab shingles - all good.
OMG, thanks for this video. I want to build a she-shed just for an art studio. I live in a mid-west state located in the USA, but it gets cold here and the weather can be unpredictable at times. This design would be prefect since I don't have a lot of yard space and I can build it slightly bigger if I want, so this is perfect for my needs. I little insulation inside along with wall board, add an electrical line for plugs and some heat and windows I can paint all winter in my own space. Thanks for your knowledge and guidance and for showing me and others that with a little effort this can be done.
Did you ever complete this studio? I am in the middle of such a build. Any feedback on how it went would be appreciated, especially as it relates to the electrical lines and the heat source used. Thanks.
Love the simplicity of the build as well as the instructions and explanations. Looking forward to my summertime 10' x 20' garage project because of this video. Many Thanks! Subscribed!!!
Thank you for this video, we are making a horse barn tomorrow and we needed to watch this because this is exactly how we are making the roof. Our girl horse is having a baby tonight too, we think, God Bless you
Great video and very informative. You did a great job and it will be very helpful on my project next week. You spoke clearly and took the time to review in detail each step. Well done. Thank you.
Thanks for this! Was just looking for some tricks and shortcuts for my shed build that I didn't already know and I picked up a few. Your principle is a lot like my dad's was... "spend the time to get your foundation right and square and remember...molding covers a multitude of sins".
I'm a middle class guy who needs a new shed. I love this so much better than the Toronto shows that use the most expensive materials and require the highest skill level. Presented by a failed actor who never sweats or gets dirty in multi camera colour corrected 4K. I don't learn anything from those. It had to be an Ottawa guy to make a video where costs matter. You distilled a decade of experience to make the complex simple and accessible. You even allowed yourself to make the project imperfectly. You totally show up those TO guys. Their videos now look like vanity projects pretending to be how to videos.
Channels like this is for us everyday kind of people. Easy to follow and all you need is basic tools, safety squints optional... Another channel you might like that is similar to this one is "Country Life Projects & Living". Thanks for taking the time to put content like this out there.
This is really a great idea; especially for a shed. After scoring the sheet metal it is easier to "break" it if you bend away from the score, not over the score.
I only found this channel tonight and thIs is the third of your videos that I have, just started to watch. I am amazed how much that I have learned so far, particularly about how to get around thing's when working alone. Thank's for sharing your knowlege.
Building a roof tomorrow since my business partner and I could not get any contractors to come build our barn so we had to get our hands dirty. Issue is the instructions for the barn sucked, we did successfully get everything up, just got to finish the roof!! Watching this video definitely helped.
because building a shed is simple dummy...how else can he explain it. Oh wait I forgot he went to shed building school for 4 years then another 2 for his masters in framing and 3rd grade math....oh the comnplexity and IQ level it takes to build a shed is beyond genius.
Jeff it's been 2 years. Any comments on how the asphalt membrane held up? Would you still recommend this? I've watched this complete series twice now. Partly because I think you are awesome at explaining things. Secondly, I'm trying to see if you are going to give Max more credit? We all know he's the brains in this outfit. :>
I do like the videos. But I am not a RUclips pirate or anything but as Roofer for 25 years in Michigan What he put down as roofing material is a underlayment meant to be Installed before you shingle the roof. its job is stopping Ice dame backup it will only last a 1 or 2 years exposed to the elements
@@bigotis1776 How did you like that membrane patch he put on the back RH corner of the roof where he came up short and had the exposed wood. Hey... he can't see it from his house!!!
I disagree, I appreciate it for what it is, and some. And I’m training to do this sort of stuff for a living. I get this channel is geared for DIYers, but if you’re just getting into the business, there are a lot of good tips here to help you learn your craft. Thanks for the great content
Thank you, I am glad I found this video. I wish I could have seen “how “ the metal drip edge went in (after you scored it, and bent it). Dummy here, I am trying to watch it all. I am going to try to build my own shed (🤣) you can laugh, because I am as well! You are correct when you stated the bow stores sell them, but they are junk and $$$ ! So I decided yesterday , that I am building my own and I had planned on doing a lean-to roof as well.. ya wanna come here and teach me!! I’ll take all the help I can get!! The shed looks wonderful, you’re were very helpful!! Thanks so much!!!
I have to agree. The roof is just laying on top of the frame. The only places (in this video anyway) where the roof is kind of attached to the frame of the building is through those 3 or 4 small blocks he used to carry the load on the edges, other than that, I didn't see any real attachment to the actual building ... that could be a real problem later, but I will look to see if there is another part to this video where he attaches it. Good call because I was thinking the same thing.
He does some good things on drywall and interior remodeling, so it's swing and a miss on this one. Where are the birds mouth cuts on the rafters.. it would be simple to scribe a pattern with no framing square cuts at all. Lost opportunity to show a first time DIY some workmanship standards that will be needed working in the house. To do that roof frame in the same manner, how about building the entire darn thing on the ground, pre assembled and marked, and then take out some components to hoist it into place. Also measure and fasten at least two corner blocks in place to square the building. If I fastened a roof frame to a shed like that, it would be in the soybean field once in November and each April like clockwork with nothing but two strands of barbed wire to hold back the wind Like I said, Jeff does some good tricks that even fellow contractors can use. Hopefully constructive criticism
Jeff even though the roofers try to pick up all the debris they will not get it all. Here is an important tip to save your family a trip to the emergency room or vet. After a roof renovation or any out door renovation or when purchasing a new or used home. Take out your construction magnet on a pole and slowly walk around the house with it and a bucket to put all the nails and brads in. We just had a new roof put in and they covered most of the ground with tarps. I still picked up enough brads and Nails to cover the bottom of my bucket an inch deep with nails and brads. This is after their cleanup the grassy area had a lot of hidden dangers. Hugs from Tahoe.
I believe AvE was the one that popularized it via his followers on RUclips (me included) but after ~45 yrs in commercial/industrial construction and a loooong stint as a Provincial Electrical Safety Officer) I had heard it used several times over the years... mostly by welders helpers!!! (Ps: I have the AvE ‘Engage Safety Squints’ tshirt) pps: Welcome to Kanuckistan, long live the Robertson screws!
Once I got my OCD under control I found this video to be fantastic! BTW, the best line of all during the video was "A screw a day keeps the doctor away." ;)
@@atchmon902 think about the name “ HURRICANE ties”, I’m guessing to prevent up lift from strong winds? A seat cut allows the rafter to have full bearing on the top plate.
I saw where you blocked and squared the roof using temporary blocks. But I never saw where you screwed the entire roofing frame down to the walls. Am I missing a step somewhere?
That's what I was expecting and now I am confused as well. The roof sittng on top of the box frame with 3 temporary screws? Okay. I found the answer from other comments from Jeff. "We used hurricane ties to secure the roof." Maybe not filmed or editted out but hurricane ties were used to secure the roof.
Close is fine in this situation 😌. As long as it's lifting, you're good. What the actual hell is he talking about? So you just lay a 2x4 the flat way to carry a load from two rafters. Than just guess your way through with blocks. I would kick you off my job with my boot 👢
@@ohiofarmer5918 if you’re really the expert you claim to be. Why are you watching shed building for beginners? Sounds to me like you sit in the truck while your crew listens to your air conditioning turn on and off.
@@davidlundey7292 I don't consider myself an expert at all. I did teach both juniors beginning layout and framing and did construct a house when I taught seniors. The foundation of the house was a half inch wider at one end than the other end. It was a full two stories high, so we moved one end of the house inward an eighth of an inch tighter per floor and a quarter inch total. We made the other end of the house a quarter of an inch looser. By moving each wall plate only an eighth of an inch shorter or longer we made up the error of a half inch. We cut each rafter precisely the same and finished the birds mouth with a hand saw so as not to lose any strength. When we got all the rafters up, all that was needed was three shims made from tar paper to keep the frame tight.. The strength of a build is very much dependent on nice fit between framing components. So build what you want how you want. Better yet, take a break and sit in your own truck and think about doing the best you know how. You will derive pleasure from good workmanship and maybe someday derive satisfaction from passing something you learn the hard way to a young person eager to learn
I built a shed with these plans from Ryan [ Details Here?> *WoodBlueprints. Com* ] . The instructions were clear and easy to implement. Even a novice can be able to build fast using this plan. I'm happy I bought the plan. It also saved me much cost.
I am not in the construction industry nor am I a carpenter, I wanted a good guide to help with small projects such as small sheds and some remodeling around the house. So there’s a magic which is Shed Plan [ visit here *WoodBlueprints. Com* ]. This Shed Plan co.vers all my instructions from top to bottom in a step by step manner.
Thanks to you Jeff, I watch all your videos and built my shed exactly how you built yours You make it very easy to follow, I had my shed up in two days! Would you like pictures?
Hi Saul, we would love to see pics. please send them to info@homerenovisiondiy.com and don't worry about the bounce back message. i will be looking for it. Cheers!
Question: The only places I see the roof tied town are the posts in front (installed in a later video) and the support blocks screwed in on either end. That seems pretty flimsy - what did I miss?
Exactly. My dad builds, has a carpenter business and I work for him, but I just don't wanna work with him anymore, he's constantly angry and humiliating me in front of everyone when I make a mistake that can easily be fixed. 😐
Excellent video. I do want to mention that this roofing will not pass inspection in some towns. My building inspector told me it had to be covered with shingles or metal. I live within city limits.
To watch the entire building process click this link. Cheers! ruclips.net/video/BLk_CAMmQPc/видео.html
RenoVision DIY
I'd like to have you build it for me considering your knowledge if possible
Home RenoVision DIY 1
Hey. just stumbled across your videos. Liking them so far. Ive got a question about the pent roof. I'm thinking about building a shed/Garage 20 x 16.5 ft (due to planning). Can i use this pent roof design on the 16.5ft span? if so, what size after would you recommend? Thanks
@@alasdairmorrison4443 - too wide. You would need an I-joist.
Thank you very much for everything you do and everything you are.
I still remember the day when my dad saw my first power tools (I bought 4 at once) “do you know how to use them?”
I said “No! But I will learn”
he was stunned by my response, I don’t remember him doing any diy and more so I don’t remember being taught how to fix something, anything… alcoholic, very abusive, physical and mental, a typical narcissist.
Today, 17years later, I’ve rebuilt the roofs for an extension, fitted floors, plumbing, some electrics.
I love dyi and I’m extremely grateful for people like yourself to which I look up to.
Many young men like myself, who never had any information, are very very grateful.
Thank you “diy dad of the Internet” 🤗
This man has amazing talent and is the best teacher
I really like how you know what mistakes I'm going to make before I make them. Then you explain why not to do it the wrong way. It really ensures that people will do it right when they know the why.
Hi,
I know this series is 5+ yrs. since you posted it but, I'd still like to thank you for your VISUAL "show and teach". I am a 110% visual learner. I can't read/follow a manual/blueprint if my life depended on it. They somehow, bore me to near tears... That goes for nearly ALL aspects of my life... SHOW me something once or twice, and I can repeat it and sometimes even improve or tweak it to my liking...
I don't know how many manuals/blueprints/whatever I have sitting in drawers, still in their original plastic covers and not opened... Be it electronic, furniture build, etc. etc... Same when I was changing the head gaskets on my old 1976 V8 Pontiac as well as installing new valves... YES, I did buy the "book" on the model of the car I had but, only thing I read and made sure to follow, was the model number of the parts and the weight the valves were to be tightened. The rest of the descriptions were just messing with my brain and my own visual "picture" of how things were to look/be when finished. Yeah, it helped that all of my boyfriends up until then had been mechanics of one sort or other and I would always be required to help/hold whatever in place.
Building on to the porch of my house, no drawing/blueprint... Same with building/remodeling the attic into living space/bedrooms for the kids... Oh and yes, I am a woman and yes, I tend to drive most men crazy... LOL Heck, I wouldn't have it any other way!! 😁
Written down measurements? Yes... Have had a few friends come out over the years saying they wanted to help but, they left pretty soon since I didn't have a blueprint for them to follow. I have that blueprint visualized in my head. GO AWAY, I can do this myself... 🤯😁 No, I'm not ungrateful, it's just that if I do it myself, I get it done the way I WANT IT DONE... Yeah, unscrew, remeasure/cut and screw back again... That's just part of the game.
And yes, I use screws for EVERYTHING!! Same as with manuals/blueprints that drive me ape shit crazy... I can't even nail in a tack without bending it 6 ways from Sunday!! Plus, much easier if/when you have to remove something since, you kinda got it wrong the first time or, second time...
Anywho... I have now built my chicken coop, following MOST of your "series" of "How to build a shed"... Difference? since it's a chicken coop and it's up off the ground about 2 feet, I have a wood/plywood floor, covered in thick vinyl flooring mat, that goes up the sides about 6 inches. Easier to keep clean. Other than that, just good grade insulation in walls, floor and ceiling. (followed your "deck building/shed" upload for that) For the electrical, I followed your upload on the "temporary" electric installment, just added inner plastic tubing that the cables go through since I felt it would be safer for the chickens and also since I have inner walls, much easier if I have to redraw the wiring for whatever reason... Plus added corrugated metal roofing, along with a water catchment system...
I used to live very rural off grid in mid BC Canada for about 5 yrs but, came back to Sweden a few years ago to be closer to my adult kids. So, yep, I know what winters and a heck of a lot of snow can do to a roof...
Anyhow, IF you did manage to get through this whole "novel"...
Thanks once again!!
//Solani
You're so entertaining. I'm making a greenhouse with a polycarbonate roof, so this helps tons. It gets HOT in this summer desert area (NW AZ) so I have real windows with screens, and vents with screens on the high since of the front that I can open or shut, then your chipboard 2' to 3' from the bottom, and south side of the project is all multi-layer 1/4" polycarbonate sheeting above the 2-foot level. You've helped a lot, and building it in 90 degrees isn't fun. It helps to learn from a pro that's FUN to learn from! We have only 1 month of San Diego weather in between HOT and COLD here, and 1 day a year of snow. So I still want to be able to grow a small avocado tree in my greenhouse! I'm 74 so I take my time.
You should have so many more subscribers, your lessons are gold.....I am a woman and I am pretty sure I can build following your explanations,
The people who gave thumbs down to this videos are probably contractors who are angry that you are teaching people how to save money.
Agree totally! I am a woman too, and I renovate all my place to put for sale, thanks to guys like him.
I have never, I repeat NEVER watched an hour long video on how to build a shed.
But I am so glad I watched this one!
Just got into woodworking,went mad and bought loads of power tools then realized I have nowhere to store them?
Well, within an hour i also learned how to build a perfect shed to store those tools :)
I love the fact that the way you built it is not perfect or within the "norm", but dam it looks just as good if you had.
And you made the video so easy to watch with your humor and well explained steps.
New sub from me,and well deserved.
Quality video. At last a video that doesn't insist on perfection for the general homeowner building a shed. This video will massively encourage homeowners to have a go at building at home and give massive satisfaction
With something like this, if it looks right, it is right 😉
Hey - I'm a 75 YO woman that doesn't do woodworking or building of anything. Even I found this very interesting and learned so much. You constantly added tips that increase a persons efficiency and ability to work alone. Well Done! Had to subscribe to see what else you have. Thanks.
Awesome! I am a woman who builds alone. I am starting work on my second tiny house and I love these tips and tricks. IT will make it easier for my second build because I am 50 now. Excellent tricks!
I like the way this guy teaches and thinks: practical. Not hung up on the technicalities, but efficient and easy to follow. Thanks, great series of videos!
happy to help. Cheers!
Jeff’s my man 😊 I liked how you had the roof edge board be able to slide snuggly into place .
I like the dyi metal bender
‘When you can do something overkill and cheap, you do it’. Best and wisest words I’ve heard in a while.
Jeff you're the Bob Ross of construction! I've watched your shed build video multiple times. I'm building a 12x20 shed at my house and your input has helped immensely. The way you describe everything is very easy to digest and I recommend your page to all my friends renovating their homes. " I'm a big boy and I know what a 1/4" looks like." LOL
Good luck lol
I am building a 8 x 8 shed 8' tall using a timber frame approach with treated 4x4 posts. I used 2x6 boards 10' long ilo of 2x4's for the roof deck. I had a total of 6 boards but could not lift the frame up to get it on the roof. I purchased two 12' ratchet straps and tied the straps to the top cross beam of the shed and the bottom of the roof deck. Tied the frame to the top beam to keep it upright. Used the ratchet straps to raise the deck up. Alternated resetting the straps to get the deck high enough where I could pivot the deck onto the top of the shed. Worked like a charm. Thank you for the video that gave me the information to get his done. Note: The shed will have a sheet metal exterior and the siding has not been installed yet so nothing was in my way to secure the ratchet straps.
love it! You are such a good teacher. Even though I'm a female who doesn't build anything, when there is something interesting you're teaching I watch the whole vid. I started here, now to back back to watch how you built this shed, lol. Thanks!
I used your trick of using the actual factory cut plywood to finish squaring up the frame and it worked like a charm. Really appreciate your video. Thank you!
This is an absolutely great DIY video with tremendous amounts of detail explained in laymen’s terms. Big fan, keep up the great work, I’ve learned a great deal tonight.
Seriously...as a Maine girl who grew up building stuff (like our house) with her dad (but not paying enough attention) your videos are giving me the confidence that I can do this. I've bought a little piece of land on a lake and can't put a real cabin on it yet but will need a shed, even while we are tenting. The pre-fab ones seem not worth the money and this series has sealed the deal for me. Had I not already subscribed, the Red Green reference would have put me over the edge. I wish we were a little more "Canadian" here south of the border. 😁
i remodel and flip houses here in Pittsburgh, PA (USA) and know all the building trades. i often like to watch DIY videos here on youtube to see if i can pick up time-saving or "best practices" tips. this video is very long but i enjoyed watching it. you did a very nice step by step explanation of "shed building 101" as you noted. i will look for another one of your videos to watch for entertainment - and learning. none of us are ever too "smart" not to "learn" something from someone else!
I'm building a coop basically on my own.. I'm a 49 yr old 5'3" woman, this whole video is my way of thinking minus building experience! Lol I'll update on how it goes...I was going to do my sheeting after the roof but I do believe this video has changed my thought process 😉
Very well done video wise. Lots of good information with explanations versus unnecessary filler stories and off topic distractions. This is a great "how to" video that moves along at a pace that is lively without rushing. There are many building points that are explained clearly which in other videos I have to search the net for to clear up. I've bookmarked it and will have to watch it a number of times as there is a lot of practical good information in it. Thanks.
We built our shed after watching your video. We did afew things a little different but you definitely gave us the confidence to build it! Thank you!
I would like to say thank you Jeff! from the bottom of my heart. I am working as a building maintenance tech 2 and planning to have remodeling classes for my future own business but I felt already went miles away with your all 101 free courses Lol. I wish you are hear in MD to work with you. Amazing engineering lesson Thank you again.
I like your modesty Jeff, but I'd be willing to bet your a pretty strong guy too. Like me your wisdom insures you choose wisely lol! Great job on the vids! I really enjoy watching. For me, RUclips has completely replaced television. It's finally so nice to be able to watch what I chose to watch and learn something. Your channel is right up there. Keep up the good work!
Thanks Jeff. Great video. My wife thinks you're lovely and now we're ready to install our 140m2 roof on our shed.
Jeff, I am building a small second story 8x10 deck by myself and watching you do this alone makes me chuckle. This channel is the best. So many good tips
Have fun with that build. Always keep your but facing the building. Cheers!
One thing I really love about this type of roof is that, if you can face the door north, that means your entire roof is exposed south, which means you can install solar panels over the whole thing and have POWER in your shed without running a power line. Should at least be enough power to run a couple of LED lights inside as well as charge up your tool batteries.
That may be a solution down the road. Cheers!
Great Video. It looked like your drip edge is right up against the facia with no gap. You can slide your fingers behind it to create the gap. The reason is surface tension. Water will wrap around the bottom of your drip edge and then fall to the ground. If there is no gap, it will wrap around the bottom and then grab your facia making your water diversion system less effective.
interesting. I will consider this when finishing. Cheers!
You are pretty awesome! It is a true gift to teach without talking down to us!
Thanks for another great video! I learn so much. From you! I have a tip you may not know.. I iron on my saw horses, and saw on my ironing boards. Get at least 4 ironing boards(nobody irons any more, so you can pick them up at thrift stores, or beside the road). They stop exactly where you want them to, hold quite a bit of weight.. perfect for long trim, and store easily. I iron edge banding on plywood on my sawhorses. 😃😊
Really enjoyed your How to build a shed video, thank you Tim , UK
Thanks! I’m about to move onto the roof build on my shed. I’m a first-time shed builder and this video is incredibly helpful! Warm regards from Whitehorse, Yukon.
Cheers Fawn, Happy to be of some help!
Thank you for your many videos. I have enjoyed many of them and am currently watching the shed series. I have a question about the roof rafters. You are not using "bird Mouth" cuts. Is the roof stabile without them? Thanks for all your hard work.
No he is not cutting bird's mouth. I would use hurricane ties in this case to give it stability he doesn't mention if he did or not. I would do hurricane ties even if I did cut bird's mouth because with a big overhang that is how wind blows a roof off the house. It gets under the overhang and if you have a large area for the wind to catch, goodbye roof, it needs to be held in place well.
Nice Jeff . I'm a framer by trade and I just built a killer shed. Fence n partioned a garage . I use your drywall techniques from way back . I'm good at my trade . You are too . You simplify things . I tell peeps especially dyi peeps to check your channel out . Cheers
Followed your video to build my own shed in the backyard. Was challenging as I am not in any type of skilled labor but with your videos it came out MUCH better than I ever expected it would!!! Absolutely amazing video!!
Great project. I built a storage shed about 25 years ago using the same method except I used 2x6 for the roof rafters. At first I had rolled roofing but 2 years ago recovered it with metal roofing and had to cut the bottom part of the OSB because the grass wicked up water and rotted out the bottom of the OSB. I replaced just the bottom section with 1 James harding piece of siding and dug a trench to cut out the grass, filled it with small gravel and garden brick on top so the grass would not grow back.
Thanks. I learned a lot and watched the whole hour without losing interest at any point. Other videos on similar projects had me sleeping in 5 mins.
My man, I have some constructive criticism to share with you. Please bare in mind, I very much appreciate the work you put into not only the project, but the time taken to film if you will, your process.
I started the trade in the later 80's. I learned from old school guys. Men that sawed off most of my hammer because I wasn't holding it properly, lololol. They were brutal in how they taught me. This is a lost art, and it is an art! They made sure I didn't forget it. The work ethic combined with the work ethic, combined with the work ethic, after year's, taught me!
Again, no harm intended!! I sincerely mean this.
This was a great basic way of teaching your audience about the speed square, or the framing square. You almost had it. In my opinion, you missed the opportunity of the "WHY." You took too many shortcuts, without explaining the "how".
You were right there with the square. Rise and run... you missed this opportunity for your audience. No birds mouths, to lock in the rafters to the plates. A D.I.Y. should at least begin to know the "what", and the "why". It almost seems like I just watched "common core" math or something. What you did, I guess works. The shortcuts and attention to detail and the "WHY", was non existent. Again, I mean no harm, I appreciate the "how" of what you did. I can appreciate it because I understand what and why you did this. But for the audience, to me, your teaching "common core" carpentry! If I didn't say anything here, my predecessors would probably cut my tongue instead of just the unused handle of my hammer.
Please keep this in mind. Your audience is much smarter than you might think.
Thank you though, sincerely!!!!!!! david, 38 yr. Carpenter, aspiring woodworker, with a whole world of knowledge and technique still for me to learn. God bless you!
I enjoyed your presentation. Especially, when you indicate, don't worry, wood is wood. It is a shed, but do everything, with the thought that I did this as close as possible. Think positve and except the challenge. I'm an all around wood worker, and specialies, in Finishes. Learned alot from your video. Great ...
Thanks for your expert knowledge! For everyone watching, use protective eyewear when cutting, your eyes are priceless! Blessings
Thanks for the awesome videos! I have a question on the details of where the roof rafters meet the top plate. Is it OK just to have the roof weight just resting on the edge of the rafters? do you not have to cut bird mouths or angle the top plates? thanks!
Great tips shared in this vid.
Here are a couple more.
1- The water divert system will work, but now too much water will go to one side.
A water spout along the receiving water side of the roof can help the water get to the ground without impacting the plants below.
2- It is just a shed, but close the soffits. Bees love openings like that to nest inside.
00
Good point
I usually view the simple things as ingenious. Brilliance, on the other hand, is designing a hip roof for an old workshop replacement at three times the cost. Apart from facetiousness, thanks much for the great idea! You must be a genius!
Yeah. Like I'm learning to do this, watching dozens of videos. Watched many explaining how to attach joists to the posts coming up from the ground (I'll be putting mine on posts, not skids). All the smart videos do a simple, elegant way: Notch the post, set the joists in, bolt it in. Then later I see some guy sandwiching the posts between two joists, making braces, etc etc etc. All just complicated silliness. I'm thinking "What are you going to do when it's time to renovate years down the line?" Simple elegance is the way.
But one lesson I learned (or reinforced) is watch a LOT of videos. Don't just watch one and think "This guy looks confident. I'll do it his way" because that video may be the bad way. If you see 20 videos and 18 are all doing it one way with a good explanation for as to why, do it that way.
I've watched a lot of shed videos and your system is so easy brilliant techniques. I always say a smart man is a lazy man and your systems are easy to follow and you can even do it by yourself thank you for sharing this
I'm about to start a tapered roof shed build and am pretty good but have learnt so much from this. Just goes to prove there's more than one way to do a job. Some great tips I'l be using. In particular to way to determine the angle cut for the joists. Excellent and thank you
Awesome job on the shed building series. Gonna use a lot of your info on my 12 x 20 lean-to shed. But what really got me hooked was the Red Green quote. Anybody that can do that on the fly is all right in my book. Keep up the good work!
At least they find me handy! Cheers!
How did your build work out? How did your attach the roof to the walls?
Awesome. He's slightly outta' breath all the time; makes little mistakes; doesn't worry about the little stuff and gets it done using a minimum of tools. Same way I do my stuff. These crazy Canucks.
He's a lot like us Australians
Its crazy watching some of the American videos, it's like they have autism
Excellent beer drinking project, well coffee in the morning anyway.
If you play your cards right, could stretch it out through the weekend until Wednesday. That will keep the wife off your back!
Good job, nice tips!
You could even "throw your back out" and get a few days on the couch recovering. Cheers!
"If they don't find you handsome, they should at least find you handy." I don't think the coiner meant it that way, but it works (thank God)😄
I appreciate you Jeff. So many videos that miss your detail. You have helped me tremendously!
Jeff you inspired me and now after the wood prices have come back down I'm building a 10.5' x 16' lean-to shed. She's all framed in and three of the four sides up - tarp on roof for now as I search out aluminum products. Trees above that drop all sorts of stuff so I'd like something smooth to help with self cleaning? Oh, I did use and bought precovid the LP smart side T1-11. So easy to put up! screws almost hide themselves in the groves. Jeff, thanks so much - stay well! EDIT: went with standard 3-tab shingles - all good.
OMG, thanks for this video. I want to build a she-shed just for an art studio. I live in a mid-west state located in the USA, but it gets cold here and the weather can be unpredictable at times. This design would be prefect since I don't have a lot of yard space and I can build it slightly bigger if I want, so this is perfect for my needs. I little insulation inside along with wall board, add an electrical line for plugs and some heat and windows I can paint all winter in my own space. Thanks for your knowledge and guidance and for showing me and others that with a little effort this can be done.
Very cool, insulate and heat and enjoy. Cheers!
Did you ever complete this studio? I am in the middle of such a build. Any feedback on how it went would be appreciated, especially as it relates to the electrical lines and the heat source used. Thanks.
Love the simplicity of the build as well as the instructions and explanations. Looking forward to my summertime 10' x 20' garage project because of this video. Many Thanks! Subscribed!!!
Good day my friend, thanks for sharing your knowledge, God bless you and your family and business. Keep on doing the great work!
Very Educational …. Thank You !!!
Always searching for knowledge and you definitely provided much insight.
Thank you for this video, we are making a horse barn tomorrow and we needed to watch this because this is exactly how we are making the roof. Our girl horse is having a baby tonight too, we think, God Bless you
Guided by your videos
I was able to build a new gardening shack so fast,
I nearly shed my plants
haaaaaaaaaa!
DEPENDS on what you had for lunch !!
Have I missed apart how is the roof secured to the walls as those little blocks will be removed great video btw
Exactly what I’m here for too
@@steph1gilmour I figured it out. on the next part of the video, he used "hurricane ties" to secure the roof to the top plates.
@@pjaxy @ what minute mark. I can't seem to find it.
Great video and very informative. You did a great job and it will be very helpful on my project next week. You spoke clearly and took the time to review in detail each step. Well done. Thank you.
Thanks for this! Was just looking for some tricks and shortcuts for my shed build that I didn't already know and I picked up a few. Your principle is a lot like my dad's was... "spend the time to get your foundation right and square and remember...molding covers a multitude of sins".
Glad I could help!
After trawling through videos I found this one is by far the most simple method and will be using it !!
I'm a middle class guy who needs a new shed. I love this so much better than the Toronto shows that use the most expensive materials and require the highest skill level. Presented by a failed actor who never sweats or gets dirty in multi camera colour corrected 4K. I don't learn anything from those.
It had to be an Ottawa guy to make a video where costs matter. You distilled a decade of experience to make the complex simple and accessible. You even allowed yourself to make the project imperfectly. You totally show up those TO guys. Their videos now look like vanity projects pretending to be how to videos.
No Fancy production costs here. Just real life on a real site. Cheers!
I'm not even Canadian and I hate those Toronto guys now.
Channels like this is for us everyday kind of people. Easy to follow and all you need is basic tools, safety squints optional... Another channel you might like that is similar to this one is "Country Life Projects & Living".
Thanks for taking the time to put content like this out there.
this is the shed my husband got amzn.to/2yTkeUq
now I want to watch that Toronto show just for a laugh!
This is really a great idea; especially for a shed. After scoring the sheet metal it is easier to "break" it if you bend away from the score, not over the score.
He did, if you noticed the aluminium has been flipped over!
I only found this channel tonight and thIs is the third of your videos that I have, just started to watch. I am amazed how much that I have learned so far, particularly about how to get around thing's when working alone. Thank's for sharing your knowlege.
Seems very Timely....Thanks for the kind words. Cheers!
This is the RenoNinja.. He will teach u the art of the 5 hammers
You have hours to catch up my friend...
Just make sure you set aside some time to actually do the work...
That reminds me of a song, hmmm....
and u know it
Building a roof tomorrow since my business partner and I could not get any contractors to come build our barn so we had to get our hands dirty. Issue is the instructions for the barn sucked, we did successfully get everything up, just got to finish the roof!! Watching this video definitely helped.
You cracks me up every single time , supper interesting and lively 😀😀
I love how this guy makes look and explains things so simple.
because building a shed is simple dummy...how else can he explain it. Oh wait I forgot he went to shed building school for 4 years then another 2 for his masters in framing and 3rd grade math....oh the comnplexity and IQ level it takes to build a shed is beyond genius.
@@kickassclone75 Your name clown suits you
Love watching you. Makes things so much more understandable. Wish this was 20 years ago, I would run and and start a shed now. Lol
We might be two years apart on this but I was thinking the very same thing.
Hi. I must of missed something. I don't remember seeing you fix the rafters to the frames. cheers
Me too. I mean, I saw a couple screws, but... what's to hold that roof in place if a strong wind puts a little lifting power under that nice overhang?
@@austenhead5303 on the next part of the shed build video, he shows how they used "hurricane ties" to secure the roof to the top plates
This is the most clever DIY roof I ever seen
I'm feeling inspired to tackle my own shed project after watching this! Thanks for the guidance! 🛠️
Jeff it's been 2 years. Any comments on how the asphalt membrane held up? Would you still recommend this? I've watched this complete series twice now. Partly because I think you are awesome at explaining things. Secondly, I'm trying to see if you are going to give Max more credit? We all know he's the brains in this outfit. :>
I do like the videos. But I am not a RUclips pirate or anything but as Roofer for 25 years in Michigan What he put down as roofing material is a underlayment meant to be Installed before you shingle the roof. its job is stopping Ice dame backup it will only last a 1 or 2 years exposed to the elements
@@bigotis1776 How did you like that membrane patch he put on the back RH corner of the roof where he came up short and had the exposed wood. Hey... he can't see it from his house!!!
This’s the best video! Easy to follow..Thank you for sharing...
This channel is underappreciated
I believe time will fix that. Cheers!
@@HomeRenoVisionDIY time is wasted without hard work, and you're not wasting any. Keep doing what you do
We have plans of never stopping. Cheers!
I disagree, I appreciate it for what it is, and some.
And I’m training to do this sort of stuff for a living.
I get this channel is geared for DIYers, but if you’re just getting into the business, there are a lot of good tips here to help you learn your craft.
Thanks for the great content
I think it's appreciated by those have found it, more a case of under-discovered!
Superb workmanship and video. Very helpful.
This is fantastic. I'm doing this job next week. This is going to be so much easier 😊
Thank you, I am glad I found this video. I wish I could have seen “how “ the metal drip edge went in (after you scored it, and bent it). Dummy here, I am trying to watch it all. I am going to try to build my own shed (🤣) you can laugh, because I am as well! You are correct when you stated the bow stores sell them, but they are junk and $$$ ! So I decided yesterday , that I am building my own and I had planned on doing a lean-to roof as well.. ya wanna come here and teach me!! I’ll take all the help I can get!! The shed looks wonderful, you’re were very helpful!! Thanks so much!!!
Wow another brother from a different mother. Excellent video thank you
I must have missed the part where you explain how you Attached the roof frame to the walls. How is the roof frame you built fastened to the walls?
It's in the linked video of the entire build, at 3:35:09 ruclips.net/video/BLk_CAMmQPc/видео.html
I have to agree. The roof is just laying on top of the frame. The only places (in this video anyway) where the roof is kind of attached to the frame of the building is through those 3 or 4 small blocks he used to carry the load on the edges, other than that, I didn't see any real attachment to the actual building ... that could be a real problem later, but I will look to see if there is another part to this video where he attaches it. Good call because I was thinking the same thing.
Shot in the dark here, but I’m thinking “screws” .... Screw that sucker down to the top of the wall plates.
He does some good things on drywall and interior remodeling, so it's swing and a miss on this one. Where are the birds mouth cuts on the rafters.. it would be simple to scribe a pattern with no framing square cuts at all. Lost opportunity to show a first time DIY some workmanship standards that will be needed working in the house.
To do that roof frame in the same manner, how about building the entire darn thing on the ground, pre assembled and marked, and then take out some components to hoist it into place. Also measure and fasten at least two corner blocks in place to square the building. If I fastened a roof frame to a shed like that, it would be in the soybean field once in November and each April like clockwork with nothing but two strands of barbed wire to hold back the wind
Like I said, Jeff does some good tricks that even fellow contractors can use. Hopefully constructive criticism
Jeff even though the roofers try to pick up all the debris they will not get it all.
Here is an important tip to save your family a trip to the emergency room or vet. After a roof renovation or any out door renovation or when purchasing a new or used home. Take out your construction magnet on a pole and slowly walk around the house with it and a bucket to put all the nails and brads in.
We just had a new roof put in and they covered most of the ground with tarps. I still picked up enough brads and Nails to cover the bottom of my bucket an inch deep with nails and brads. This is after their cleanup the grassy area had a lot of hidden dangers.
Hugs from Tahoe.
Cheers to that Valerie. No one takes care of your house as good as yourself for sure.
Oh, I loved this. Thanks. It's the solution I was looking for. Also, I love your voice and sense of humour, so it was a pleasant watch.
Man, your videos are so well done. Excellent info...thanks for doing these!
Our pleasure. We love making them. Cheers!
Never heard of "Safety Squints" before. I'm stealing that one :-)
Excellent video as always.
I am blessed with thick eye lashes. Keeps out the bugs. Cheers!
watch youtuber AvE. you'll learn a whole new language lol
I believe AvE was the one that popularized it via his followers on RUclips (me included) but after ~45 yrs in commercial/industrial construction and a loooong stint as a Provincial Electrical Safety Officer) I had heard it used several times over the years... mostly by welders helpers!!! (Ps: I have the AvE ‘Engage Safety Squints’ tshirt) pps: Welcome to Kanuckistan, long live the Robertson screws!
absolutely awesome explanation, instruction and sharing of very professional construction
Cheers James!
Just subscribe, its usually hard for me to understand when some ppl are explaining me something, but this guy makes it easy to get it!
Thoroughly enjoyed this video. I’m planning to build a shed with an 8/12 pitch for solar panels and batteries.
Once I got my OCD under control I found this video to be fantastic! BTW, the best line of all during the video was "A screw a day keeps the doctor away." ;)
Gotta love those safety squints :)
Yes, they are really reliable against saw dust and small debris! Cheers!
Agreed - and don't forget the big stuff that can't fit between the eyelashes lol
AvE Fan?
AvE subscriber?
Sawing "in the air", is great too
Any reason for the roofing that you didn't cut in a birds mouth to set it flush on the 2x4? Maybe cause it wasn't that much of a slope or not needed??
I think the hurricane ties help carry the load. Unless you have major snow, I wouldn't think you'd need to cut birds mouths.
It saves me, I have a devil of a time with making bird's mouth notches
He don't have a clue
Because he's a hack
@@atchmon902 think about the name “ HURRICANE ties”, I’m guessing to prevent up lift from strong winds? A seat cut allows the rafter to have full bearing on the top plate.
I've watched up to this point so far and I swear I got a Red Green vibe from Jeff. It was made all the stronger with the Red Green quote!
River dance hahaha, great DIY video, nice presentation...Thank you!
I saw where you blocked and squared the roof using temporary blocks. But I never saw where you screwed the entire roofing frame down to the walls. Am I missing a step somewhere?
That's what I was expecting and now I am confused as well. The roof sittng on top of the box frame with 3 temporary screws?
Okay. I found the answer from other comments from Jeff.
"We used hurricane ties to secure the roof."
Maybe not filmed or editted out but hurricane ties were used to secure the roof.
Close is fine in this situation 😌. As long as it's lifting, you're good.
What the actual hell is he talking about? So you just lay a 2x4 the flat way to carry a load from two rafters. Than just guess your way through with blocks.
I would kick you off my job with my boot 👢
@@ohiofarmer5918 if you’re really the expert you claim to be. Why are you watching shed building for beginners? Sounds to me like you sit in the truck while your crew listens to your air conditioning turn on and off.
I thought the same thing. He never did attach the roof to the walls. However, I think they make brackets that will work.
@@davidlundey7292 I don't consider myself an expert at all. I did teach both juniors beginning layout and framing and did construct a house when I taught seniors. The foundation of the house was a half inch wider at one end than the other end. It was a full two stories high, so we moved one end of the house inward an eighth of an inch tighter per floor and a quarter inch total. We made the other end of the house a quarter of an inch looser. By moving each wall plate only an eighth of an inch shorter or longer we made up the error of a half inch.
We cut each rafter precisely the same and finished the birds mouth with a hand saw so as not to lose any strength. When we got all the rafters up, all that was needed was three shims made from tar paper to keep the frame tight..
The strength of a build is very much dependent on nice fit between framing components. So build what you want how you want. Better yet, take a break and sit in your own truck and think about doing the best you know how. You will derive pleasure from good workmanship and maybe someday derive satisfaction from passing something you learn the hard way to a young person eager to learn
Loved the Red Green reference, haven't seen that show in years!
I built a shed with these plans from Ryan [ Details Here?> *WoodBlueprints. Com* ] . The instructions were clear and easy to implement. Even a novice can be able to build fast using this plan. I'm happy I bought the plan. It also saved me much cost.
I am not in the construction industry nor am I a carpenter, I wanted a good guide to help with small projects such as small sheds and some remodeling around the house. So there’s a magic which is Shed Plan [ visit here *WoodBlueprints. Com* ]. This Shed Plan co.vers all my instructions from top to bottom in a step by step manner.
Quote of the year! "If they don't find you handsome, then they better find you handy!!!"
😂😂😂😂😂 fantastic 😂😂
Thanks to you Jeff, I watch all your videos and built my shed exactly how you built yours
You make it very easy to follow, I had my shed up in two days! Would you like pictures?
Hi Saul, we would love to see pics. please send them to info@homerenovisiondiy.com and don't worry about the bounce back message. i will be looking for it. Cheers!
Home RenoVision DIY
Hey Jeff - I sent you pictures let me know if you got them and how did I do..
Thank you
Question: The only places I see the roof tied town are the posts in front (installed in a later video) and the support blocks screwed in on either end. That seems pretty flimsy - what did I miss?
hurricane brackets were installed after the shed was pretty much completed
more people would be building today if they had a dad as good natured as this guy.
Exactly. My dad builds, has a carpenter business and I work for him, but I just don't wanna work with him anymore, he's constantly angry and humiliating me in front of everyone when I make a mistake that can easily be fixed. 😐
Hey Jeff, silly question...where are you affixing the rafters too? Are you “toe-nailing them into the end plates?
Hi Jeffrey we used hurricane straps from Simpson strong tie to secure. Cheers!
Yes. The most important thing is to keep everything in the shed dry! AGREE! 🥰
Excellent video. I do want to mention that this roofing will not pass inspection in some towns. My building inspector told me it had to be covered with shingles or metal. I live within city limits.