Awesome as always! I will be doing some shopping on your site in the next month or so, just waiting on some things on my end to get straightened out. As always, thanks for doing what you do! 🙏🏼👍🏼
Hi Friend! Interesting video. I have a question, at 9:12 you clicked "Yes" for PATS, but you didn't do reprogramming/initialization on PATS system. How did the PCM recognize the keys&immo? BTW I also deal with 2.3L Ford Escapes model year 2003-2013. When reprograming Used PCM, and click "No" button when asked if vehicle is equipped with PATS, am I able to start the car? So assuming that Immo is set to off. Since programming used PCM requires 2 original Ford keys. And car cannot start with only 1 key registered to PCM Cheers, thanks in advance! :)
it does everything plus more! here is the link on my website: globalcommerceca.com/products/vnci-vcm3-diagnostic-tool-for-new-ford-mazda-lincoln-support-can-fd-doip-work-with-ford-mazda-original-software-driver-ford-ids-unlimited?_pos=1&_psq=vnci&_ss=e&_v=1.0
Yes here is the link to purchase on my website: globalcommerceca.com/products/vnci-vcm3-diagnostic-tool-for-new-ford-mazda-lincoln-support-can-fd-doip-work-with-ford-mazda-original-software-driver-ford-ids-unlimited?_pos=3&_psq=v&_ss=e&_v=1.0
yes it ca here is the link to purchase: globalcommerceca.com/products/vnci-vcm3-diagnostic-tool-for-new-ford-mazda-lincoln-support-can-fd-doip-work-with-ford-mazda-original-software-driver-ford-ids-unlimited?_pos=1&_psq=vcm3&_ss=e&_v=1.0
Thank for the reply. Rats bit through the white can bus network wire. I spliced it and everything is working. Haven't moved the vehicle yet. Self soldering tube kit is in the mail. I dint need to program anything. 😅 Cleared all tbcs engine runs nice. 🌌🏌♂️
yes as seen in the videos here is the link to purchase: globalcommerceca.com/products/vnci-vcm3-diagnostic-tool-for-new-ford-mazda-lincoln-support-can-fd-doip-work-with-ford-mazda-original-software-driver-ford-ids-unlimited?_pos=1&_psq=vnci&_ss=e&_v=1.0
Can this be used to reprogram the PCM to be standalone? Meaning disabling PATS and other diagnostics in order to have 5.4L & 4R100 transmission from an Lincoln Navigator swapped into an 70s F100?
Great instructions. I'm having a problem following along on a 2015 F-150 using the VMCI VCM3. After starting the Program Module Installation and clicking OK at the turn switch on prompt (switch still off), it runs through the checking network for a bit then drops back to the menu where you select Programmable Module again. Any suggestions?
Hi, did you purchase from globalcommerceca.com? If so please send a message or call or support line direct with your order number for immediate response. Globalcommerceca@gmail.com
Can this same programming be done on a 2011 F-150 5..0l. or is it different..??? Also can I reflash my PCM on a 2011 f150 5.0l back to stock or with the latest & newest updates available, cuz my truck was sold to me with a aftermarket tuned installed & it was never removed Before selling it..?? Keep up da great videos I enjoy them all. Thanks..
Appreciate it brother, like and subscribe! The same programming should work well for your 2011 F-150, as it’s designed to support programming for Ford, Mazda, and Lincoln vehicles. You should be able to reflash your PCM back to stock or with the latest updates using it, which is perfect since your truck has that aftermarket tune. Just make sure you have the correct software and follow the steps carefully
Im gonna start shoping with ya just seen a few items I picked up from china at very close to same price minus the 1 month wait. Do you sell ids unlimited software. I got alot of vcis thats compatible but Id be interested in the software. Qny reason for virtual machine? Just to keep it from interfering with everything else I assume. I had similar issues with multiple software and vcis
Good question. This was briefly explained but I'll expand on it. The virtual machine is used to eliminate any conflict of software already on your pc, or can arise later,also ease with installation/ configuration as it all done for you and makes setup/use almost plug and play. Any problems with pc or swapping pc? Simply re-download the image and you're back to a working installation. It can be installed natively in Windows as stated in the video if the user chooses. Just a bit more complexity on setup..
@@globalcommerce7654 I was commenting while watching. So I had to change the message as I went futher into the video. Do you sell the ids and will it allow me to use the autel jvci in virtual machine. I assume you have to add the device into virtual machine. To be honest I can't remember last time I used virtual machine is when windows 8 came out and it was a nightmare not as bad as Vista but still bad. Had go use it to run xp lol
check out the listing on my website: globalcommerceca.com/products/vnci-vcm3-diagnostic-tool-for-new-ford-mazda-lincoln-support-can-fd-doip-work-with-ford-mazda-original-software-driver-ford-ids-unlimited?_pos=3&_psq=v&_ss=e&_v=1.0
printed instructions that come in the box and in the download files are terrible. struggling to understand which file is which referenced in this video. I think the video should show the step by step on which files to install and then run
There was an issue on vmware website PLEASE FOLLOW UPDATED ONLINE INSTRUCTIONS AT BOTTOM OF INSTRUCTIONS SHEET! Its only 3 steps! 1. Install VMWARE player 2. Extract vcm3 image file with provided password using winrar 3. Open the extracted file in VMWARE player. A installation video is coming tomorrow will be installed by a 13 year old with no help, if he can do it, ANY ONE CAN.
Wow, sorry about that, we shipped out about 60 this morning.. that means 100+ sold in less than 24 hours.. We have more on the way.. should be back in stock by end of week!
Well done. Like to see people taking it to the next level. This is what's called right to repair.
go to work my brother for taking Automotive technicians to the next level
Nice. Might be a life saver for me.
Awesome as always! I will be doing some shopping on your site in the next month or so, just waiting on some things on my end to get straightened out. As always, thanks for doing what you do! 🙏🏼👍🏼
Are you going to be required to join a certain organization for certain programming functions to work on IDS and FDRS?
No, IDS uses 10min security waits on most vehicles.. those remain the same.
Great stuff. I just ordered one from you. Thanks
Hi Friend! Interesting video. I have a question, at 9:12 you clicked "Yes" for PATS, but you didn't do reprogramming/initialization on PATS system. How did the PCM recognize the keys&immo?
BTW I also deal with 2.3L Ford Escapes model year 2003-2013. When reprograming Used PCM, and click "No" button when asked if vehicle is equipped with PATS, am I able to start the car? So assuming that Immo is set to off. Since programming used PCM requires 2 original Ford keys. And car cannot start with only 1 key registered to PCM
Cheers, thanks in advance! :)
Can i do PATS with this without NASTF? Awesome video.
Yes you can, these usually have a 10min wait period.
@@globalcommerce7654permanently or until software gets updated?
Question, this is reprogramming the whole pcm, not just changing the VIN, correct?
That is correct! If you watch the whole entire video and it is updated to the latest firmware.
Can you program an aprim sync module with it?
I do the service but not at the moment. Stay tuned! I will have it back and running soon!
Can I swap a used pcm and keep that program but change the vin to original vin?
Does this do everything vcx nano does?
it does everything plus more!
here is the link on my website:
globalcommerceca.com/products/vnci-vcm3-diagnostic-tool-for-new-ford-mazda-lincoln-support-can-fd-doip-work-with-ford-mazda-original-software-driver-ford-ids-unlimited?_pos=1&_psq=vnci&_ss=e&_v=1.0
Can I refresh my 09 f350 5.4 back to stock with this setup? Thanks
Yes here is the link to purchase on my website: globalcommerceca.com/products/vnci-vcm3-diagnostic-tool-for-new-ford-mazda-lincoln-support-can-fd-doip-work-with-ford-mazda-original-software-driver-ford-ids-unlimited?_pos=3&_psq=v&_ss=e&_v=1.0
Will this tool work on a 2008 explorer?
yes it ca here is the link to purchase: globalcommerceca.com/products/vnci-vcm3-diagnostic-tool-for-new-ford-mazda-lincoln-support-can-fd-doip-work-with-ford-mazda-original-software-driver-ford-ids-unlimited?_pos=1&_psq=vcm3&_ss=e&_v=1.0
Thank for the reply. Rats bit through the white can bus network wire. I spliced it and everything is working. Haven't moved the vehicle yet. Self soldering tube kit is in the mail. I dint need to program anything. 😅
Cleared all tbcs engine runs nice. 🌌🏌♂️
Does the vcm3 come with the software for the laptop to work With it ?
yes as seen in the videos
here is the link to purchase: globalcommerceca.com/products/vnci-vcm3-diagnostic-tool-for-new-ford-mazda-lincoln-support-can-fd-doip-work-with-ford-mazda-original-software-driver-ford-ids-unlimited?_pos=1&_psq=vnci&_ss=e&_v=1.0
Can this be used to reprogram the PCM to be standalone? Meaning disabling PATS and other diagnostics in order to have 5.4L & 4R100 transmission from an Lincoln Navigator swapped into an 70s F100?
Can you change year with this and do I need to program key again
yes you can change the year but as long as the computer is compatible with that year and watch the video completely!
Great instructions. I'm having a problem following along on a 2015 F-150 using the VMCI VCM3. After starting the Program Module Installation and clicking OK at the turn switch on prompt (switch still off), it runs through the checking network for a bit then drops back to the menu where you select Programmable Module again. Any suggestions?
Hi, did you purchase from globalcommerceca.com? If so please send a message or call or support line direct with your order number for immediate response. Globalcommerceca@gmail.com
I didn't, wish I had...no support from Amazon. Found your video when trying to program thos pcm
Cool video Does that vci works woth Mazda IDS? Mazda vcmi is really expensive
Yes this supports mazda ids as well
what are you using to program the newer chrysler that have can fd for eps
can we use that on mercedes benz programing?
If it allows programming via Ford VCM3 J2534.
Can this same programming be done on a 2011 F-150 5..0l. or is it different..???
Also can I reflash my PCM on a 2011 f150 5.0l back to stock or with the latest & newest updates available, cuz my truck was sold to me with a aftermarket tuned installed & it was never removed Before selling it..?? Keep up da great videos I enjoy them all. Thanks..
Appreciate it brother, like and subscribe! The same programming should work well for your 2011 F-150, as it’s designed to support programming for Ford, Mazda, and Lincoln vehicles. You should be able to reflash your PCM back to stock or with the latest updates using it, which is perfect since your truck has that aftermarket tune. Just make sure you have the correct software and follow the steps carefully
Do u have any videos on setting up vxdiag?
Yes,multiple videos on the channel search here on RUclips: global Commerce vcx nano
Hi; why axle. Its 375 idont see that number on the vin stiker
It's B6 on the door, in the members area is a decoder for Ford that converts all these values..
Can you use FDRS with it?
Yes, as stated un video it uses same drivers/ software as vcm3 ni difference.
Does this tool let you reconfigure the tire size? I have larger tires and the speedometer is off
Yes it does, it uses original Ford IDS software.
@@globalcommerce7654are there instructions on how to do this?
Hard to get support on progams downloads and how to run software can you help?
Please watch installation video, so easy a 13 year old does it
ruclips.net/video/bpZq3Ry3X8I/видео.htmlsi=N8YYptT_PnUA5wcP
Amazing vid👍💯
This can program the tcm of focus?
Yes
@@globalcommerce7654 directly to the ford server?
Great info! Thank you for sharing.
Can I have access to ids software ?
No need pay for the software dealer to work o for programming pcm
No, our software is unlimited.
You have in stock
You have in stock
@@OscarGomez-zy3xo everything sold out but we have more stock coming this week..
can this work also with fdrs
Yes, our version will work for anything vcm3 compatible, it uses vcm3 drivers/ software and comes with our version of IDS unlimited no license needed.
@globalcommerce7654 do u have fdrs unlimited no license to ?
Is there a cap to what year this software is able to program?
IDS is suitable to mostly 2018 vehicles newer usually requires FDRS
Hi! I'm in Europe, will it work for european Fords?
This tool will work for any ford / mazda just as the ford VCM3 our version uses Original Ford IDS and works for all ford's to year 2018
@@globalcommerce7654 Nice, Thank you sooo much!
I have a vcm2. Do you sell the software separately? And will my vcm work?
Yes but it's designed for vcm3 and haven't tested with vcm2..
Did you try with vcm2?
I did not. I’ve been using the vnci that it came with and it has been working well.
Im gonna start shoping with ya just seen a few items I picked up from china at very close to same price minus the 1 month wait. Do you sell ids unlimited software. I got alot of vcis thats compatible but Id be interested in the software. Qny reason for virtual machine? Just to keep it from interfering with everything else I assume. I had similar issues with multiple software and vcis
Good question. This was briefly explained but I'll expand on it. The virtual machine is used to eliminate any conflict of software already on your pc, or can arise later,also ease with installation/ configuration as it all done for you and makes setup/use almost plug and play. Any problems with pc or swapping pc? Simply re-download the image and you're back to a working installation. It can be installed natively in Windows as stated in the video if the user chooses. Just a bit more complexity on setup..
@@globalcommerce7654 I was commenting while watching. So I had to change the message as I went futher into the video. Do you sell the ids and will it allow me to use the autel jvci in virtual machine. I assume you have to add the device into virtual machine. To be honest I can't remember last time I used virtual machine is when windows 8 came out and it was a nightmare not as bad as Vista but still bad. Had go use it to run xp lol
The download link included in the package is not working.
Please retry, we were doing server maintenance
@@globalcommerce7654 Will do. Thanks for the excellent content and the prompt reply!
How much does this cost to do ?
check out the listing on my website: globalcommerceca.com/products/vnci-vcm3-diagnostic-tool-for-new-ford-mazda-lincoln-support-can-fd-doip-work-with-ford-mazda-original-software-driver-ford-ids-unlimited?_pos=3&_psq=v&_ss=e&_v=1.0
Does the software comes with it??
Yes, it comes with our version. As always support directly from us.
printed instructions that come in the box and in the download files are terrible. struggling to understand which file is which referenced in this video. I think the video should show the step by step on which files to install and then run
There was an issue on vmware website PLEASE FOLLOW UPDATED ONLINE INSTRUCTIONS AT BOTTOM OF INSTRUCTIONS SHEET!
Its only 3 steps!
1. Install VMWARE player
2. Extract vcm3 image file with provided password using winrar
3. Open the extracted file in VMWARE player.
A installation video is coming tomorrow will be installed by a 13 year old with no help, if he can do it, ANY ONE CAN.
Do you sell your IDS software to suit a VCM II?
no i dont. will do soon
You’re awesome
Your sold out already?
Wow, sorry about that, we shipped out about 60 this morning.. that means 100+ sold in less than 24 hours..
We have more on the way.. should be back in stock by end of week!
@globalcommerce7654 thanks I'll keep a eye out
1st comment