I have a 2007 Toyota Yaris I had to replace my old Throttle Body, with a new one just wanted to ask you if when the new one is installed, id it just plug and play? or doe the new Throttle body have to be calibrated with a computer?
@@alexshatner3907 As long as you are using the factory ecu, it should be plug and play. The ecu should take care of making the necessary adjustments of the throttle body.
Great video, I had watched scorpion Multimedias video, and he had done a decent job at explaining but you really blew it out of the water, been meaning to do this with my Yaris, and your video makes me confident I can do it. Keep up the good work
Thanks! Yeah his video did a good job of explaining things, but I figured I would document the entire process from start to end. Many people, including myself, are visual learners and can easily pick up once we see how its done, hence why I made the video the way it is.
@@arvin_arn When you replace it with a new one, is it just plug and play and boom the car runs like new? or do you need special computers or equipment to calibrate it??
I like the throttle response i got from the swap. It took me a good bit of trial and error to get the idle in the ball park. I still have times where it revs too high or too low depending on the situation but i can live with it. Im going to ooen up the intake behind the throttle body next . The whole is still smaller then the 1zz diameter.
Yeah I have the same problem with it revving high on cold startups but i'm also ok with it. Luckily my exhaust isn't too loud so I don't have to worry about waking up my neighbors every morning before work 🤣
i put 2zr throttle body in my 1nz , i already installed 1zz throttle but my rpm went very high in cold start , 1nz is the best engine ever 230kmh in stock 1nz part installed 1)vvti rs 1nz 2)Mazda Maf sensor (ZL01 model) 3)Intake manifold 1nz rs (short than normal 1nz) 4)Fuel Injector RS/TRD from 1nz or you can put camry injector
Just completed my Swap, I used a 2rz-fe throttle body and swapped the elctronics over, I also made a little intake tube, I cut two intake boots in half and used both the large edns with the pipe in the new intake pipe in the middle so it fit correctly and had the right oil breather direction. Love the mods keep it coming!
Man…I was thinking about selling my 2008 Yaris and get something to mod. But your channel gave me a new spark to do it with it (deep in my heart I love that car) Question is, is that really a good investment in this specific model? Also, any groups or so to get ideas from? Man…my wallet is not happy with me finding your channel lol
I'll be honest and say the aftermarket scene for this model is very limited. Most people who tune/modify these cars are over in Asia where the Vios is pretty popular. Here in the states, not much interest so it's hard to find aftermarket parts. Of course there are the forums of yarisworld that have a good amount of info, and we also have a fb group to try and get more people involved so we can get more aftermarket support.
If you are talking about the stock air filter in the Yaris, I would honestly just make sure to replace it regularly. I didn't see any improvement from different brands of filters, including the K&N drop in filter. Regular cleaning/replacement will do just fine.
hello. whats the point of larger throtlle body with the same diameter intake hose? get a larger intake hose that fits outside the throtlle body for more air !!
Hello, I have a Toyota Avensis T25 1.6 2008 Manual 5 Speed 3ZZ-FE. Today I made a swap Throttle Body from Toyota Avensis T25 1.8 2008 1ZZ-FE. I also changed the hose from 1.8 because the hose from 1.6 didn't fit on the 1ZZ Throttle Body. I disconnected the negative battery when I did the process than put it back again when finished. The car was revving up and down to learn the 1ZZ Throttle Body, but now it idle at 1000 rpm. Before was idling at 650/700 rpm. What could it be? Thank you.
did u have to do anything with the ECU when u made any of these mods with the air filter and throttle body? ive got an 09 yaris hatchback and want to do the same thing
I didn't need to do anything to my ecu after swapping the throttle body. As long as you disconnect the battery prior to doing this, the yaris ecu will relearn and adjust to the new throttle body
@arvin_arn Hi Arvin, im late to the party but great tutorial video, loved how you covered everything in one video. wanted to ask if there is a way i can raise my idle RPM on these electronic throttle bodies. much appreciated. watching you from Sultanate of Oman. peace!
There is a small screw that is covered by epoxy that allows you to adjust the idle RPM. Just need to remove the epoxy and have a screwdriver small enough to make adjustments.
Hola me encanta todo lo que le haces a tu auto... Tengo el mismo... Soy de chile me encantaría si me puedes responder unas consultas para así hacer lo mismo a mi auto... Saludos desde chile 👍🤙
So far, based on me daily driving this car, it hasn't changed how often I fill up gas. I'll need to do a little more testing to see if my mpg has dropped
I've done the same install successfully, but this ECU relearning is taking so long that I'm starting to feel that my ECU isn't as smart as i thought lol. Its been days now. Can you help me out. What have you done so far to get it to normalize? Or is anyone else here gotten it dialed down? I'm thinking about manually adjusting the IAC to see a lower idle, but needed to check if someone's got a better way to dial this thing down before I turn that screw. Thank you!!!
You need to manually adjust that throttle position screw on the throttle body itself. There is a blob of resin covering that screw, scrap that resin off and adjust it.
Hey Arvin or who ever may know, will doing this make it so you don't pass the visual smog test for inspection? In the comments on Rassool Racings vids he said that you wouldn't pass with this mod. I'm living in New York and I think he's from California and not sure if there standards are different.
Each state has their own requirements for car inspections. I live in Hawaii and we don't have smog inspections so I don't have to worry about this. I would check your specific state if they require a smog test before doing this swap.
I'm gonna give it a try and see what happens during my inspection this year. Might also check with a local mechanic. But anyways thanks for the helpful install video! @@arvin_arn
Personnaly, I did a swap with a 2000 corolla throttle body and its aluminum intake manifold (had to machine a phenolic spacer, and slotted the holes of the manifold) and added a scion xB rs3.0 cold air to it. Hardest part was adjusting the phenolic spacer's contour so it fits, the sensors/hoses are all plug and play. (I'm no mechanic and I have a backup car and it was nerve-wrecking, but the satisfaction when it started... priceless.) Battery relocation and throttle cable bracket on to-do list, but so far it was an 8-hours job for me. Not sure I recommend yet. (2005 echo rs hb, for ref.)
My guess is that it transfers the heat of the coolant to the air so the throttle body butterfly doesn't get stuck/frozen in cold weather, just a guess though.
Check out my 1 month update on my swap: ruclips.net/video/o6-oCKTG1U4/видео.html
I have a 2007 Toyota Yaris I had to replace my old Throttle Body, with a new one just wanted to ask you if when the new one is installed, id it just plug and play? or doe the new Throttle body have to be calibrated with a computer?
@@alexshatner3907 As long as you are using the factory ecu, it should be plug and play. The ecu should take care of making the necessary adjustments of the throttle body.
@@arvin_arn Nice thanks you Arvin, by the way I live in Arvin California zip 93203
Great video, I had watched scorpion Multimedias video, and he had done a decent job at explaining but you really blew it out of the water, been meaning to do this with my Yaris, and your video makes me confident I can do it. Keep up the good work
Thanks! Yeah his video did a good job of explaining things, but I figured I would document the entire process from start to end. Many people, including myself, are visual learners and can easily pick up once we see how its done, hence why I made the video the way it is.
Brother can this be done to a scion xb 2005
@@arvin_arn When you replace it with a new one, is it just plug and play and boom the car runs like new? or do you need special computers or equipment to calibrate it??
thanks brother 🙏🏼 and great video
Your video helped me so thank you 😁
@@arvin_arn you're welcome, I'm glad it was helpful
@@arvin_arn enjoy your 3K RPM rev at cold start. ahahha
@@omacharya3031 yeah i'm used to it 🤣
I like the throttle response i got from the swap. It took me a good bit of trial and error to get the idle in the ball park. I still have times where it revs too high or too low depending on the situation but i can live with it. Im going to ooen up the intake behind the throttle body next . The whole is still smaller then the 1zz diameter.
Yeah I have the same problem with it revving high on cold startups but i'm also ok with it. Luckily my exhaust isn't too loud so I don't have to worry about waking up my neighbors every morning before work 🤣
8
@@arvin_arn on stock ecu? And did it get better with time?
@@whcwcjecjecuecuw6654 i'm on the stock ecu and I haven't had any issues since then
Loving the build man was thinking about getting rid of my 07 Yaris but it’s been soo good to me ima tune it up a bit and fix the body a bit, subbed!
It's a great car as long as you maintain and take care of it. It hasn't let me down before.
@@arvin_arn it really is! I'm here for your journey learning alot too 👌🏽
27:00 nice old school blue diesel Mercedes parked on the street during your test drive. Those old diesel Mercedes last forever.
i put 2zr throttle body in my 1nz , i already installed 1zz throttle but my rpm went very high in cold start , 1nz is the best engine ever
230kmh in stock 1nz
part installed
1)vvti rs 1nz
2)Mazda Maf sensor (ZL01 model)
3)Intake manifold 1nz rs (short than normal 1nz)
4)Fuel Injector RS/TRD from 1nz or you can put camry injector
ohhhhhhhhhh man, I’ve been waiting for this one! We would love an update vid after a month or so to see how it held up :)
Will do! I have a few more autocross races coming up so I can test it out there too!
Just completed my Swap, I used a 2rz-fe throttle body and swapped the elctronics over, I also made a little intake tube, I cut two intake boots in half and used both the large edns with the pipe in the new intake pipe in the middle so it fit correctly and had the right oil breather direction. Love the mods keep it coming!
That's awesome!
Work for me great video did the swap for an 2015 axio
Wow, my name is arvin and I have a Toyota vios! Would love to try this mod one day
Man…I was thinking about selling my 2008 Yaris and get something to mod. But your channel gave me a new spark to do it with it (deep in my heart I love that car) Question is, is that really a good investment in this specific model? Also, any groups or so to get ideas from?
Man…my wallet is not happy with me finding your channel lol
I'll be honest and say the aftermarket scene for this model is very limited. Most people who tune/modify these cars are over in Asia where the Vios is pretty popular. Here in the states, not much interest so it's hard to find aftermarket parts. Of course there are the forums of yarisworld that have a good amount of info, and we also have a fb group to try and get more people involved so we can get more aftermarket support.
This helps a lot since i also have problem on hill-climbs that my yaris bogs down.
Glad to hear it works!
Quedó muy bueno el invento. Lo has llevado hacer reflash a la computadora? Y cuantos hp tiene
I made copper gasket for mine x amount of years ago no leaks with factory 1nzfe manifold.
Awesome!
Please can a faulty throttle body of my 2nz can prevent the car from speeding when accelerate
Great video bro
Were i live all the yaris are 2nz 1.3l
Do you the throttlebody swap will work?
Don't @ me on this but u might be able to swap the 1nz TB on it
Thanks for your video.. Do you have or can you recommend a video for replacing the air filter?
If you are talking about the stock air filter in the Yaris, I would honestly just make sure to replace it regularly. I didn't see any improvement from different brands of filters, including the K&N drop in filter. Regular cleaning/replacement will do just fine.
Hi. This work with 2005 corolla if i install a camry one?
hello. whats the point of larger throtlle body with the same diameter intake hose? get a larger intake hose that fits outside the throtlle body for more air !!
Hello, I have a Toyota Avensis T25 1.6 2008 Manual 5 Speed 3ZZ-FE. Today I made a swap Throttle Body from Toyota Avensis T25 1.8 2008 1ZZ-FE. I also changed the hose from 1.8 because the hose from 1.6 didn't fit on the 1ZZ Throttle Body. I disconnected the negative battery when I did the process than put it back again when finished. The car was revving up and down to learn the 1ZZ Throttle Body, but now it idle at 1000 rpm. Before was idling at 650/700 rpm. What could it be? Thank you.
You need to port match your intake manifold to the size of the throttle body
Definetly plan to do this a later point
so you only do the coolant bypas if you have an aluminum coolant housing?
@@mikemike4737 you can still do the coolant bypass, I just decided not to
What benefits does changing the throttle body do?
did u have to do anything with the ECU when u made any of these mods with the air filter and throttle body?
ive got an 09 yaris hatchback and want to do the same thing
I didn't need to do anything to my ecu after swapping the throttle body. As long as you disconnect the battery prior to doing this, the yaris ecu will relearn and adjust to the new throttle body
Any recommendations I'll be leaving my car Belta/Vios 2012 parked for more than 1 year and how should park my car properly
Does this give more power? How about fuel economy?
@arvin_arn Hi Arvin, im late to the party but great tutorial video, loved how you covered everything in one video. wanted to ask if there is a way i can raise my idle RPM on these electronic throttle bodies. much appreciated. watching you from Sultanate of Oman. peace!
There is a small screw that is covered by epoxy that allows you to adjust the idle RPM. Just need to remove the epoxy and have a screwdriver small enough to make adjustments.
Hello, regarding the throttle body gasket, can the Toyota Corolla oem throttle body gasket be used to solve the issue of sealing properly?
Hola me encanta todo lo que le haces a tu auto... Tengo el mismo... Soy de chile me encantaría si me puedes responder unas consultas para así hacer lo mismo a mi auto... Saludos desde chile 👍🤙
Whats the size of your 1zz tb ? 60mm, 65mm or 70mm ?
How possible throttle body upgrade for 1nzfe on ncp42?
But how about the gas consumption maybe you get less mileage
So far, based on me daily driving this car, it hasn't changed how often I fill up gas. I'll need to do a little more testing to see if my mpg has dropped
Me too.I follow scorpion multimedia too .Your yaris engine is 1nzfe ?Mine is 2nzfe 1299 cc. Yours cc?
Yes I have the 1NZ-FE engine which I believe is about 1,497cc (according to google)
1zz or 2zr i want use in my 2nr engine produa myvi
Hello did you replace the gauge cluster yourself , Or was it in there when you got the car ?
The gauge cluster is stock with the car.
Do you mind sharing what is the brand/make of that wide angle rear view mirror?
Broadway rear view mirrors
I need that intake! Where you get it
Check out my K&N Intake video
ruclips.net/video/oWdAKHbv5Cc/видео.htmlsi=9R2VkcKUupMwnG8F
I've done the same install successfully, but this ECU relearning is taking so long that I'm starting to feel that my ECU isn't as smart as i thought lol. Its been days now. Can you help me out. What have you done so far to get it to normalize? Or is anyone else here gotten it dialed down? I'm thinking about manually adjusting the IAC to see a lower idle, but needed to check if someone's got a better way to dial this thing down before I turn that screw.
Thank you!!!
You need to manually adjust that throttle position screw on the throttle body itself. There is a blob of resin covering that screw, scrap that resin off and adjust it.
Hey Arvin or who ever may know, will doing this make it so you don't pass the visual smog test for inspection? In the comments on Rassool Racings vids he said that you wouldn't pass with this mod. I'm living in New York and I think he's from California and not sure if there standards are different.
Each state has their own requirements for car inspections. I live in Hawaii and we don't have smog inspections so I don't have to worry about this. I would check your specific state if they require a smog test before doing this swap.
I'm gonna give it a try and see what happens during my inspection this year. Might also check with a local mechanic. But anyways thanks for the helpful install video! @@arvin_arn
How to fix high rpm?
Are you using more fuel with the new throttle now ?Higher fuel consumption?🤔
Check my 1 month update video I did after installing this. There I highlight my fuel consumption
@@arvin_arn ok thank you.
Hi .. to avoid issues , you brought the 22030-21030 tb with 22030-37010 tps ? .. it’s the only way ? Thanks
Personnaly, I did a swap with a 2000 corolla throttle body and its aluminum intake manifold (had to machine a phenolic spacer, and slotted the holes of the manifold) and added a scion xB rs3.0 cold air to it. Hardest part was adjusting the phenolic spacer's contour so it fits, the sensors/hoses are all plug and play. (I'm no mechanic and I have a backup car and it was nerve-wrecking, but the satisfaction when it started... priceless.) Battery relocation and throttle cable bracket on to-do list, but so far it was an 8-hours job for me. Not sure I recommend yet. (2005 echo rs hb, for ref.)
I did this, but still get p0505? Any ideas?
how has the swap effected your smog check, still able to pass? I keep throwing EVAP codes p0505, incorrect purge flow. have you thrown codes?
Hawaii doesn't have smog inspections so I don't need to worry about it. As far as engine codes, I haven't gotten any since doing the swap.
Do you have the part number for the intake you are using?
Check out my video when I installed the K&N air intake
🐸👍
Is larger throttle body better?
Yes, check out my 1 month update video.
Do you know what that grate on the gasket is for?
I honestly don't know but I will do a little bit of research to see what they do
My guess is that it transfers the heat of the coolant to the air so the throttle body butterfly doesn't get stuck/frozen in cold weather, just a guess though.
Did it increase your horsepower?
Can't say for sure since I never did a before/after comparison but I would say it would be minimal
What's the point to the swap?
You live in Hawaii with a temperate climate. You could just buy pass the coolant lines altogether.