Toyota Tercel Weber 32/36 Carburetor Install
HTML-код
- Опубликовано: 8 сен 2024
- Genuine Redline Weber 32/36 K740 Install on my 1985 Toyota Tercel. Was pretty straight forward as ALL the vacuum components were removed.
Enjoy Old-School Quality Car Content.
Cannot believe how unbelievably pristine that interior is!!
Thank you!!!
me too ive seen really good ones and that looks almost the best
Just picked up a 1982 Toyota Tercel. Carb looks like rats been chewing on it. Could find a good diagram for the endless vacuum hoses. Found your video and ordered a Weber. Just hoping I can get it installed correctly. 😅
Great car I've owned three last generation Tercels the last two people destroyed driving recklessly. I've drove in many of the older ones many of my friends growing up couldn't afford fancy cars. Oh the places the Tercel has taken us one of Toyotas best cars.
Right on! I am swapping a Weber into my 1985 Tercel 4WD with 52k miles currently.
sweet! mines a 85 with 73k, these are such fun lil cars
Great vid man! I'm considering doing the same carb swap on my 87 SR5 wagon. Didn't realize pretty much all the vacuum crap can be chucked so this was some good insight.
oh yeah I junked all that vacuum stuff. I still gotta setup a catch can system for the 2 valve ports on top the valve cover.
I'm not doing an install, but this was really useful for me because i'm doing some carb work 👍
😍😍😍😍 dude. I had one of these as my first car. The five door auto (for four door with hatch). Damn that car hauled ass with the Weber’s.
Pimpin ain't easy but it's necessary...very nice ride sir.
yes sir!! Thank you
Solid, I would recommend you throw in a fuel pressure regulator after that pump though. The carbs are meant for 3.5-4 the pumps pushing 7. Gonna blow some seals later on down the road.
oh yeah thats the next thing I gotta do, definitely runs way too rich
Sweet lil ride I like it
Appreciate it !!
Toyed with doing that to my 1980. Carb is high priced and there are quite a bit of vacuum lines on it.
Great video. That engine bay though, so spacious to do mechanics
Thanks! Very enjoyable to work on these cars
Sooo clean.
What's the size of the plug you guys used near the front of the manifold. Having trouble finding a plug. Thanks.
I removed it and went down to my local hardware store,, was a typical NPT fitting size was easy to find!
Love these cars
have the same engine and same weber 3236, can you tell me how much turns for the misture, and turns for the idle needle
gonna have to play with it, your elevation will affect the turns slightly
The mixture is supposed to be set to 1 and half or 1 and 3 quarters when seated
What size was that bolt that went into the exhaust side of the EGR?I went to every hardware store locally and can’t find what I need =[
Found a drain plug that worked! M20 x 1.5
Hey, you happen to know the size for the other plug on the manifold? @@allentang8033
should be a regular metric size,, we have tacoma screw over here so I went there!
This is beautiful to watch, the music is perfect. New subscriber from Meru county in Kenya
How did you attach the stock throttle linkage?
Space age magical pimping 💯💨
So it's been awhile, what kind of performance did you get? My friend is having low power issues on a newly rebuilt engine. Has a weber from a Celica on it. Not sure what the CFM is, but says it's under powered and running rich.
Help! I watched the video before swapping out my carburetor. I took out the vacuum lines indiscriminately and now I have no vacuum for the 3 vacuum lines that connect to the distributor.
I see that there is a vacuum port on the carburetor…
Not sure what to do.
Convert the distributor to mechanical advance?
What did you do?
dope car ! and beats !
wow thank you!! (:
Hey man i brought the same K740 kit for my 16 valve 4AF engine do you know what size air correctors and main primary and secondary keys are on urs?
カローラⅡの、兄弟車が、海外では、現役で走っているのですね!!今となれば、希少価値なので、大切に維持していって下さいね!!
Question, do you remember where you attached the hose to the PVC valve?
The PVC valve goes back into the carb air intake. I will be attaching a catch can in-between for fun.
What plugs did you use to block off the holes in the manifold?
take the sensors down to a regular hardware store and give me this NPT fitting. Just a brass piping piece that plugs instead of being like barbed. Teflon it up and you're good 2 go!
Where does the hose on top of valve cover go?
What kind of fuel pressure regulator should they put on there some of them are expensive
i spent way too much money doing an aeromotive setup, however its the best of the best and will last me a lifetime so i don't mind! There are cheaper options out there that will work just fine, i mean you're only making 80-100hp!
Would this apply to a 88 Nova? Basically a 88 Corolla with quad lights? A 4AC series engine I believe?.
yes
more or less yes
I know this may be a long shot but do you still have that hose you took off the air filter?
no I don't... sorry man!
There is a hole under the air intake filter. It might take in dust .
what exactly do you mean?
On 8:40 . that chrome plate where the air filter sits on . there is a 1 centimetres circle hole . if you don't cover it . then the air filter is useless.
@@wakapassie2670 ohhhh i see that now! didn't think about that... how should I cover it?
You can cover it with a tube patch . the patch you use to patch flat bicycle tubes . as long as no air can pass trough.
I know this is a couple years old, but for anyone reading this... That hole is for the PCV intake.
Would you ever sell this Tercel?
everything is for sale for the right price!
hey bro good video! i plan on installing one of these on my 1977 corolla with a 2TC! my only question is i don’t know how would i hook up the auto tranny kick down cable? would i connect it to the throttle cable? also where did you buy this? can i see the website link bro bc i heard people be selling fake ones
I got mine on eBay, I have zero experience with weber carbs and auto transmissions... sorry!!
So asinine when TBI could have been used instead & with more HP. Toyota really stuck it to us with that idiotic front wheel bearing assembly & the rear control arm assembly. Good reliable efficient car though.
I got a 87 its front wheel drive.i see yours is rear wheel drive.
mine is a 85 and its front wheel drive. For some reason these motors are facing straight, its really weird compared to all their other models but man does it make it easier to work on!
@@slimesspeedshoptv oh thats what it is very trippy.
Is for sale or sold
keeping for life !
Fuel pressure regulator needed ?
Technically yes. After dropping in the Weber your psi raises a bit. Would definitely recommend one, I will be coming out with a video installing one in the future!!
Is the car is a rwd or ???????????
nah 85 tercel has straight engine fwd its weird
FWD car with a straight engine setup - kinda funky
is the original carb for sale?
I scrapped that thing.
@@slimesspeedshoptvdamn, bummer...
@@MourningMountains can I ask why you need it? You live in California??
@@slimesspeedshoptv yeah, in the east bay. our smog laws are wack.
@@MourningMountains damn bro... glad I do not live there. WA has laws but a ton of shit slides, expect lately if you've seen the "takeovers" its ruining our culture up here. WA is next cali