1973 CB500 Cafe Racer Build
HTML-код
- Опубликовано: 14 ноя 2021
- I built this 1973 Honda CB-500 Four into a cafe racer.
It was a super fun little project that still has some mechanical work to get her back on the road & running again. 
Авто/Мото
Авто/Мото
My late best friend used to restore old early 70s Hondas for a hobby outside of his normal job. cb450s and 350s etc. Make them look new, sell them and then find another to redo. His last one was different. He took a cb750, put a modern triumph front end on it and a ducati rear end/swingarm on it. Had a company called Hindle custom make a 4 into 1 header. It was his last project before he passed. I have a Valkyrie Interstate. He rode a 82 Gl1100. I often thought I should buy an old Honda to have a bike like he would have restored.
I like the cutaway while you were trying to take the plenum out, that thing is such a pain in the ass
Awesome bike, man!
Did you RIVET on the rear hoop? If anyone ever ride pillion that is is just waiting to fail. Just run a bead of weld along that interface.
Rad video brother 🤙🏻
You make the best videos on RUclips man
What you do is awesome boy !
Thank you!
Wow rough
❤❤❤❤❤❤❤❤❤good job❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
Sweet video! Hoping to see the bike on the channel again running and driving!👏
Thanks so much! I'm glad you enjoyed the video!
Love your videos! If you’re looking to add more content to your channel I’m not an expert nor a RUclipsr by any means but you could always make separate videos just for you cutting the rear and mounting the new seat. Or working on the carb. Or even just installing new handle bars and just break down the videos. Overall I really enjoy your builds and want to see you keep posting! So thanks 🤙🏻
Thanks, great idea!
You deserve more subscribers
Being a super novice builder I can't tell you how much you've helped me. Thanks so much and you have a great eye without over doing things.
Ouch, a second year CB500Four in nice shape. This hurts. At least you didn't completely butcher it like another person I just watched. This cafe racer stuff is hard to watch. The absolute worst was this moron that F-ed up a FIRST year CB750 Four to make his "dream bike". That's criminal.
Much better to keep it on original becuase its a very rare bike. But it depends on your idea bro. New subscriber. Im now a fan bro
I also think that the bike looks a lot better in original state.A Giuliari seat with some sport handlebars would do it for me. All these so called "Cafe Racers" look the same. I wouldn't think about raping my '75 z900 like that.
My first motorcycle was a 1973 Honda CB500. I picked up up in good running condition for $400 lol. I think that was in 2001.
I would prefer the original look... But great effort though... 😊
Sick builds
Thanks so much! New Sportster build coming soon!
C'est scandaleux comment il a fixer la boucle arrière... Soude la, le métal est déjà en train de se rompre
I was wondering if you could show how you made the helmet mount. It's the first video I've watched and I'm really excited about your other projects, cool work and the helmet mount is great, greetings
I like it but i wish you didn’t cut parts since they’re starting to get rare. Kinda sad to watch
Do you need to add any sort of muffler when cutting the exhaust like that, or is it fine the way it is?
I much preferred a bit more stock with some of the mods you did.
Nice!...I want to build one myself, but I can't seem find a 750 at a good price. Then its where do I start...Great video though!
I've currently have a 75 Honda CB 125S torn down and I'm getting ready to order up some turn signals and headlight. Please aharw how you use LED 12 volt lights with a 6 volt system if possible? Any guidance would be very appreciated.
How did you do your handle bars ? Are they the stock bars ? Are they just positioned a lower ?
Wd40 on hand grip bet that took ages to dry out
Damn no disrespect, but you messed that bike up .
greeting! I'm making a racer of yamaha xy900 1983, what is your opinion about mogadget? greetings from Croatia!
Great build, honestly the only thing I'm confused about is when you used WD40 under the grips. I have a hard enough time keeping grips solid with alcohol wipes, grip glue, etc. I usually end up blowing compressed air into the grip to create an air pocket while I slide it on. I have never seen anyone use lubricant under a grip. I'm not judging or criticizing I'm genuinely asking, is there some method of success to this that I've been missing all these years. Thanks!
Using gas as lube works pretty good
I don't think I would put any passengers on that seat. That rear hoop has little to no structural value just being screwed into the old frame. It should have been welded in place if you don't want a passenger falling into the rear tire when the screws pull out.
Yes you’re right. This was a temporary solution till I got it to my guy with a welder.
If you're going to destroy Survivor at least do it right.
Invest in a welder. Man this hurt
What make handlebars are you using??
Hi. I’m using some 7/8” clubman handlebars I picked up off Amazon.
I def would have went with a brown seat.
Great video, subbed! Great solution for mounting the rear end for those who don’t have a welder accessible! Also question, what material did you use for the seat pan?
I disagree with this, I feel like that's an accident waiting to happen. Aesthetically it seems to work, but functionally and structurally it isn't providing anywhere near the support it should. I would caution you or anyone not to do this, but that's only my opinion. I'm sorry you didn't get an answer to you materials question. It's something I wanted to know as well.
Bro an inverter welder costs 50 dollars as much. If you have money to get a 550 Honda you can afford a stick welding machine. That thing he did with the bolts doesn't seem to safe, can be a temporary solution but I would put my life on two bots
Damn I saw the video again. Are self drilling screws. Not even a bolt
😊😊🌹🌹👍👍👍
In Germany we say: Pfusch
With that two seater banana shaped seat it will never get the cafe racer look, I know, everything is cafe racer this days 😖
You didn't even show the bike at all once you finished lmao you just sat on and blocked most of the work you just did 😂
I would of left it original
Exhaust needs to be wrapped back to front, not front to back. The way you did it is going to cause them to unravel.
You should also always have the bandade wet when applying it
Trying to keep constructive here but i’m not agreeing with the way you mounted your rear hoop. Weld it please before you or your passenger have an accident with it. Also keep making new videos with improvements on this bike. I’m sure it will turn out even cleaner in the long run!
Hi, you're 100% right on welding the hoop. I don't have a welder & this was to hold me over till I could get it welded. I would definitely not want a passenger on till it was welded! Thanks for the constructive feedback!
Why????
To show bad taste.
,so a yellow headlight no ten signals not legal
Are you thinking of selling this racer?!
Well I actually already did.
@@twopencemoto4759 no! 😭😢😩
@@eddielopez4408 I've got a 72 CB 450 I may be willing to sell.
@@twopencemoto4759 would you happen to have any photos? I went to your website I did not see it there, but my gosh I love your work!
@@eddielopez4408 thanks so much. Shoot me a message on Instagram and I’ll send you some pics.
What a mess
Ah man such a nice bike in original condition why trash it ?! 😢
Agree. The prices are going up too so he lost a bunch of money there, the original is just a good bike
Seriously, but look at what he opened with. The cup explains it all. These hipsters with deep pockets are destroying these bikes. I was lucky enough to get my hands on a complete one and I'm just modding parts with better OEM options while keeping the origin parts in storage.
It was the first thing he said. “It’s a dream come true”. Did you give up on your dreams James?
BUBBA...
Yikes
Butcher
That is an ugly saddle!