Audi S5 engine mounts replacement fully guided

Поделиться
HTML-код
  • Опубликовано: 27 авг 2024
  • Best way to save $1000 replacing my engine mounts myself and alone. Hard job but doable. The engine mount on all models of Audi will fail due to their design. You can follow my instructions and replace the mounts yourself. Subscribe for more contents of the Audi S5.
    Subscribe to our channel: bit.ly/3r3vd5M
    Warning: this is a little bit complex, but if you have problem during the installation just drop a comment for clarification. It is straightforward, but involves a lot of efforts and time.
    Audi A5/A4/A3 (B8/B8.5)
    Engine support bar: amzn.to/3tmZOwT
    Drive Impact Socket Set: amzn.to/3czObf9
    Triple Square Spline Bit Socket Set: amzn.to/3czOqqz
    Trolley Jack Car Lift: amzn.to/30Jlo2q
    Jack Stands: amzn.to/3vtJtZa
    Instruction from 034M: bit.ly/3qQrKYn
    Before I changed my motors mounts under acceleration the tire near the bad mount would literally JUMP and you will feel it jumping under sudden acceleration. Audi OEM motor mounts will fail after or before 50K miles so it is a good idea to replace them. Check my diagnostic video to access the damage yourself.
    Diagnostic of bad motor mount for my Audi s5 V8 MT. A lot of vibration can tell you your motor mounts are bad, broken or exploded. This situation applies to all the Audi models. A3 A4 A5 A6 A7 A8 S3 S4 S5 S6 S7 S8
    The S5 and S4 with 3.0T will experience the same problems, also any recent 3.0T, 2.0T will. Under hard acceleration your car will have some non linear movements mostly up and down, and slightly to either left or right.
    #audis5
    #AudiS5issues
    #audiS5badmotormount

Комментарии • 20

  • @Robert-vp6xf
    @Robert-vp6xf 2 года назад +2

    Good video. Nice job and straight to the point.

  • @Electrotat
    @Electrotat 2 месяца назад

    you will find if you connect it to vcds it will have a code stored which you need to reset, thanks for the video.

  • @nickbentley8760
    @nickbentley8760 Год назад

    Thanks for the guide, I tried using the Audi manual which says remove the air con pump and alternator but there is no space to remove aircon pump. Now I am doing it your way, its a lot of bolts but I just got the mounts out! Now I am looking forward to rebuilding the front end, Cheers

    • @RoxusRemo
      @RoxusRemo Год назад

      How did it go?

    • @nickbentley8760
      @nickbentley8760 Год назад +1

      @@RoxusRemo Tricky on my own but got there in the end, changing suspension as well so not on the road yet, cheers

  • @car-dcd
    @car-dcd День назад

    Thank you! Are the two engine mounts the same or is there a right and left when ordering. I often see "left" or "both sides, left" but I never see "right" when searching for engine mounts

  • @Sascha-zd4bz
    @Sascha-zd4bz Месяц назад

    Great video love it ❤

  • @moneymikeslickwill8749
    @moneymikeslickwill8749 Год назад

    Good video brother thank you an may God bless you!!

  • @hkg_speed22
    @hkg_speed22 3 месяца назад

    Just got mine done, thank you for the awesome video! What were the torque specs for the two engine mount bolts and the rest?

  • @doronkoz
    @doronkoz 2 года назад +3

    Audi SQ5 2015... can bad ruined engine mount can cause gearbox hard and weird shifting? Or make like a safe mode on gear when turn into a street???

  • @georgenerces7259
    @georgenerces7259 Год назад

    amazing video. Much appreciated helped me a lot!

  • @reao
    @reao 2 года назад +2

    I am about do to the mounts on my Sq5. This video was vary informative because the process will be almost the same.
    Did you have a check engine light for your failed mount?

    • @ersauto
      @ersauto  2 года назад +1

      no my car did not have any check engine light. It was just from vibration and harshness that I decided to check (in my other video) then decided to replace in this video

  • @procharger94
    @procharger94 Год назад +1

    Thanks for the great video. How was your alignment after you were done?

    • @ersauto
      @ersauto  Год назад +1

      You're welcome. Yes the alignment was good at first. I didn't have any issues the following weeks. A year later I started to have some clunky noise. I went to a mechanic shop after trying to find and fix myself but nothing. The submrafe bolt came loose and was making noise due to the load etc....but I think my problem started after I had the mechanic installed lowering springs that's a few months later that I got clunky noise issues which needed the subframe to be realigned and torque.

  • @LaTinoHustLa91
    @LaTinoHustLa91 2 года назад +1

    Was your old motor mount leaking fluid? I think my driver side motor mount is shot, noticing a lot more vibration on idle and when coming to a stop, plus I see a little smoke coming out from the driver side bank as if the fluid is leaking onto part of the cat or something hot thus creating smoke

  • @ruialmeida2592
    @ruialmeida2592 Год назад

    Hello, great vídeo. Did you replace also the volta?

  • @MattTillmanhart
    @MattTillmanhart 2 года назад +1

    Where are you? I’ll pay you to fix mine. I’m in south East massachusetts