Thanks for making this video! This video confirms that I’m not the only one getting runny foam consistency on both the car shampoo and the ultra foam shampoo. I thought there was something wrong with my pressure washer setup. Like you, I was disappointed on how runny the ultra foam shampoo is for a product that has “ultra foam” in its name. Only soap I had good foam is the mega foam. Liked and subscribed! Keep up the good work man.
Thank you I really appreciate it. I just did a review on the new Maguires ultimate snow foam. I was shocked by it. It’s cheap and works great. You might want to check that out.
The key is GPM. The higher the gpm, the more foam you get. That’s why some youtubers tend to have better foam. They tend to have nicer pressure washers for there businesses vs weekend warrior set ups.
I use the Car shampoo and i get results very close to your Mega foam results. What the heck would I get if I use Mega foam 😳 But I currently use the K1322TS pressure washer and absolutely had no issues with Car shampoo. It foams very good. I'm looking at the Ultra and Mega shampoo , that's why I'm watching this video.
It doesn’t matter what soap you use when your pressure washer is pushing 1.9 gpm. I have the same setup here but I get the same foam results from both products. Maybe mega foam by just a bit because it clings longer to the surface, but in the end, they kind of seem like the same product to me when running through the kranzle.
The ultra foam supposedly has a bit of a protectant in it as well. Not as much as the wash and wax of course, but that could be why it doesn't foam as much as expected.
Something is not right I believe you’re using too much water or your pressure washer is low on psi possibly but there’s no way they do barely even that
I’ve tested them with 3 different power washers and 2 different foam cannons. The mean thing is I used all of the same equipment on the same day. So the test is constant. The only thing I can think of is some of those soaps work better different types of water. I don’t think any of them are bad. There’s a lot of overlap with the Adams shampoos. For me the two best are mega foam and the graphene. I get 95% of the foaming soaps to work great for me. Thank you for watching and commenting.
@@BringItMuscleCars yeah that makes sense totally understand they each serve their own purpose but very pricey all of them in the end haha I’ve been wanting to “upgrade” I’ve been using maxi suds 2 , honey dew , and mr pink but I get 1 gallon for $22 for each of those I want that adams mega foam but for $60 that’s a scary price ahaha
@@aztekcayt7945 I still use honeydew and mr pink all the time. They are a good low cost soap. Mega foam really only foams better than them. I always say most of these soaps work great if you use a wash mitt. I’ve tested a bunch of Walmart soaps and they work. I’ve got videos on all those. You may want to check them out.
Better at foaming, not cleaning. The graphene shampoo is superior in every way other than foaming. The lubricity on it is so better than any other Adam's soap. Higher lubricity > more foam.
Noticed you didn't have the Griots foam cannon set to full foam. That little black knob on the cap should have been turned all the way clockwise. While Mega Foam is still the champ, the other products would have produced better foam if set to full foam. I'm guessing that you may have been using the Ryobi 1600 psi pressure washer because I heard is cycle just like mine is.
I have an active VF52. I do run a 1.1 orifice. Moving the knob doesn’t change things much. It’s a consistent test if I never change it. I’ve used most of those products with the MJJC foam cannon with similar results.
@@BringItMuscleCars good to know, I currently use i think armoralls wash and wax and thay seems to work well, ill try the graphene next!! Grtting some mega foam tomarrow that I'm gonna test our
Thanks for making this video! This video confirms that I’m not the only one getting runny foam consistency on both the car shampoo and the ultra foam shampoo. I thought there was something wrong with my pressure washer setup. Like you, I was disappointed on how runny the ultra foam shampoo is for a product that has “ultra foam” in its name. Only soap I had good foam is the mega foam.
Liked and subscribed! Keep up the good work man.
Thank you I really appreciate it. I just did a review on the new Maguires ultimate snow foam. I was shocked by it. It’s cheap and works great. You might want to check that out.
The key is GPM. The higher the gpm, the more foam you get. That’s why some youtubers tend to have better foam. They tend to have nicer pressure washers for there businesses vs weekend warrior set ups.
Great job! Nice to see the differences. Adam’s has great stuff.
They really do. And I’m impressed that each soap is really a different product.
I use the Car shampoo and i get results very close to your Mega foam results. What the heck would I get if I use Mega foam 😳
But I currently use the K1322TS pressure washer and absolutely had no issues with Car shampoo. It foams very good. I'm looking at the Ultra and Mega shampoo , that's why I'm watching this video.
It doesn’t matter what soap you use when your pressure washer is pushing 1.9 gpm. I have the same setup here but I get the same foam results from both products. Maybe mega foam by just a bit because it clings longer to the surface, but in the end, they kind of seem like the same product to me when running through the kranzle.
The ultra foam supposedly has a bit of a protectant in it as well. Not as much as the wash and wax of course, but that could be why it doesn't foam as much as expected.
Lovely comparison! I suggest you try sticky snowball. Very similar results to mega foam for less than the ultra foam shampoo.
I think I did a video on that when it came out. I started my own line. It’s called bring it garage. You might want to check it out.
Put a 1.1mm orifice on your cannon. Way thicker suds.
Something is not right I believe you’re using too much water or your pressure washer is low on psi possibly but there’s no way they do barely even that
But still very great video !
I’ve tested them with 3 different power washers and 2 different foam cannons. The mean thing is I used all of the same equipment on the same day. So the test is constant. The only thing I can think of is some of those soaps work better different types of water. I don’t think any of them are bad. There’s a lot of overlap with the Adams shampoos. For me the two best are mega foam and the graphene.
I get 95% of the foaming soaps to work great for me. Thank you for watching and commenting.
@@BringItMuscleCars yeah that makes sense totally understand they each serve their own purpose but very pricey all of them in the end haha I’ve been wanting to “upgrade” I’ve been using maxi suds 2 , honey dew , and mr pink but I get 1 gallon for $22 for each of those I want that adams mega foam but for $60 that’s a scary price ahaha
@@aztekcayt7945 I still use honeydew and mr pink all the time. They are a good low cost soap. Mega foam really only foams better than them. I always say most of these soaps work great if you use a wash mitt. I’ve tested a bunch of Walmart soaps and they work. I’ve got videos on all those. You may want to check them out.
@@BringItMuscleCars gotcha thanks for getting back to me and letting me know means a lot n
Yeah you’re right that mega foam is insanely better than the others..lol
Better at foaming, not cleaning. The graphene shampoo is superior in every way other than foaming. The lubricity on it is so better than any other Adam's soap.
Higher lubricity > more foam.
Great video. Can the Adam car shampoo be used as a pre wash soap?
None of them work great as a pre wash soap. They pull a little dirt of but work much better with a wash mitt.
@@BringItMuscleCars what would you recommend to be used as a pre-washed soap before washing with the washmit?
Noticed you didn't have the Griots foam cannon set to full foam. That little black knob on the cap should have been turned all the way clockwise. While Mega Foam is still the champ, the other products would have produced better foam if set to full foam. I'm guessing that you may have been using the Ryobi 1600 psi pressure washer because I heard is cycle just like mine is.
I have an active VF52. I do run a 1.1 orifice. Moving the knob doesn’t change things much. It’s a consistent test if I never change it. I’ve used most of those products with the MJJC foam cannon with similar results.
do you recommend the graphene
Low PSI or too much water
What kind of pressure washer do you have
Active VF52
is the graphene worth using on a non protected pa8nt i should ask
Yes it is. Does it protect the same as having a spray - no. Will it help the water bead up and run off for a week or two - yes.
@@BringItMuscleCars good to know, I currently use i think armoralls wash and wax and thay seems to work well, ill try the graphene next!! Grtting some mega foam tomarrow that I'm gonna test our
@@autograph415 I like mega foam a lot.
@@BringItMuscleCars good brother
I drive a g35 coupe. I hope you can still accept me as your brother
Let's go 🚗💨🔥
Thank you
Sickkk🤙🤙💯💯🔥🔥
Thank you
holy kids
They are like 3 houses away. Nothing I could do about it.
First
Thank you.